Amith Garment Services - Testing Equipment

Pilling tester is used to replicate pilling in fabrics under standard test conditions as per ICI Method.

Pilling tester with digital LCD controls. A Unit comes with 2 pilling boxes with standard cork lining fitted inside and 5-digit pre-set counter. The boxes are rotated about their central axis as per standard conditions.

Accessories include specimen mounting jig, specimen inserting tool, tape, marker pen, test template, 8 nos of pilling tubes and scissor.

Pilling photographs - ASTM OR IWS are available optionally.

Inside, size of each box is 225mm x 225mm x 225mm and cork lining thickness of 4mm.

Option of 4 stations also available.

Amith Garments Digital Twist Tester is a used to evaluate Twist per Inch or Twist Per cm of Single& Double Yarn.

Amith Garments Digital Twist Tester is completely made of Mild Steel which is duly powder coated for long life. It consists of a rotating jaw which is motor driven and next is stationary which is fitted on tensioning assembly. It works on twist-untwist method. Microprocessor based control panel is provided for setting the equipment according to single & double yarn. Digital display of TPI in the control panel is also provided. Tensioning weight from 1 50 g is supplied with the machine.

Single & Double yarn can be tested.

TPI or TPCM can be calculated.

Tensioning weight 1-50 g is provided.

Microprocessor Control panel for accurate test results.

Motor driven automatic twist tester.

Max test length 500mm.

Works on Twist Untwist method.

35 kg/ cm2 To find out bursting strength of knitted /woven/non-woven/cardboard / carton board even if it is laminated.

Digital display of results with peak and hold options. Hydraulic load under rubber standard diaphragm and manual clamping method at a controlled increasing rate (option also available for 70kg load cell *100gms sensitivity with pneumatic clamp ).

Our Bond strength tester is handy instrument to measure bonding strength of any textile / coated material. Example : Bond strength of fusing interlining with base fabric can be measured or bond strength in coated / laminated fabric can be measured.

Good Instrument to measure efficiency of fusing machine / laminating or coated machine.

Max capacity - 3kg, Accuracy 25 gms.

Digital Handy model and fixed floor model are also available. Long Gripper is provided to hold the test specimen accurately.

For measuring colour fastness against xenon light.

Measures against accelerated sun exposure & countdown timer up to 999hours.

Hour totalizer 1500W air cooled temperature.

Measure, Control and Display of Black Panel and/or standard temperature (BPT &/or BST) from 9 to 90.

Measure, Control and Display of test chamber temperature.

Display of Humidity % RH.

Button Impact Tester determines of impact resistance of plastic sew-through flange buttons.

Button Impact Tester is completely made of Mild steel which is duly chrome plated for corrosion free life.

Standard impact ram of 840g is dropped from six predetermined height on a button. Steel latch is used for releasing the weight.

Place a button under the Ram, on the base plate.

Insert the Pin according to the height required.

Pull out the pin.

The ram will fall on the button.

Remove the ram.

Check the extent of damage of the button.

Weight of Impact Ram: 840g

Predetermined Heights

- Height 1 : 32 MM

- Height 2: 44 MM

- Height 3: 67 MM

- Height 4: 83 MM

- Height 5: 95 MM

- Height 1: 117 MM

Recovery properties against creasing of any textile material can be tested by using this simple instrument to produce accurate results.Circular scale graduated in 1 degree is provided.Provided with fully mild steel with chrome plated loading device, specimen tweezers, and template. (template size 40 mm x 15 mm and 50 mm x 25 mm).

Amith Garments 45 Flammability Tester is used to evaluate flame resistance of fabric.

Amith Garments 45 Flammability Tester is completely made of mild steel which is duly powder coated for long life and aesthetics. Specimen holder is fitted at45. Flame moves to and fro with the help of cam through motor. Special gas regulator is provided for controlling the flame length. Specially designed gauge is supplied for setting flame position. Digital timer of 1/10 seconds is provided for highly accurate results. Standard cord of 50 Tex is supplied to stop the flame spread.

45 Flammability Tester to check flame resistance to fabrics.

Standard stop cord of 50 tex.

Re-settable Digital Timer for setting time.

Special Gas regulator.

Specially Designed gauge for setting flame position.

Amith Garments Digital Washing Fastness Tester is a basic instrument for a textile testing lab. It is used to evaluate color fastness to accelerated washing and dry cleaning.

Amith Garments Digital Washing Fastness Tester is completely made of Stainless steel. Supplied with Eight Beakers Four 1200ml & Four 550ml which meets AATCC & ISO Standards. Gear Motor of 40 RPM is used for meeting standard specification. Microprocessor based controller is provided for controlling time & temperature. Neoprene Gaskets are used for leak proof beakers at high temperature. 1.5 kw two heater is used for fast heating.

As Per ISO & AATCC Standards.

Four 1200ml & Four 550 ml Beakers.

Re-settable Digital Timer & Temperature Controller with Buzzer.

RPM of Beaker Assembly: 40

Temperature Sensitivity: 0.1 C Max: 99 C

Completely Made of Stainless Steel.

SDC Woven Felt Pads (discs 90mm) 24 piece pack

SDC Woven Felt Pads (discs 140mm) 24 piece pack

SDC Wool Abradant Fabric 5 metre pack

SDC Nonwoven Felt Pads (discs 90mm) 24 piece pack

SDC Nonwoven Felt Pads (discs 140mm) 24 piece pack

SDC Polyetherurethane Foam Discs (38mm) 1000 piece pack

SDC Polyetherurethane Foam Sheets 25x20cm 25 sheets

SDC Wool Abradant discs 175mm 100 piece pack

Martindale Abrasion Tester is completely made of mild steel which is duly powder coated for long life and aesthetics. It has four stations, it means, it can make test four different samples together. It is supplied with 3 Kpa, 9 Kpa & 12 Kpa Load. Specially designed specimen holder is provided for highly accurate results. Pen for drawing lissagious Figure is also provided with this. Special handle in top moving plate is for easy operation. Digital Microprocessor based control panel for displaying no of revolution machine has run.

Amith Garment Bursting Strength Tester is used to check bursting strength of woven, non woven & knitted fabrics. It can be used for checking bursting strength of paper & paper boards.

Amith Garment Bursting Strength complete body is made of mild steel duly powder coated. Specially designed specimen holding clamp with handle is provided for smooth & flawless performance. German Load Cell with Digital Meter is supplied for accurate measurement of bursting strength of fabrics. Special feature-Diaphragm pressure correction facility is inbuilt in the equipment.

Digital bursting strength tester for knitted fabrics.

Digital display of bursting strength in kg/cm2.

Microprocessor based controller for accurate results.

Capacity : 35 kg/cm2, Sensitivity: 100g

To determine accurate twist measurement of Single, Plied and OE yarn specimens. Direct TPI / TPM / TT results in digital display for selected gauge length avoids manual calculations. Operating principle : Untwist & re twist method for single Yarn, Untwist method for plied yarn. Unique tension mechanism suitable to all kind of textile yarns. Microcomputer based operation with user friendly menus. Feather Touch Operation switches, suits laboratory purpose. Adjustable gauge length up to 20 / 50cm. Adjustable Operating speed increases the efficiency.

Yarn count either from a lea / hank or from fabric- woven / knitted can be measured electronically and result is displayed digitally.

Confirms to accurate yarn count measuring system with the help of built in software.

Option to measure sliver, hank or fabric GSM also available

Yarn count numbering system in NE, Nm, TEX or Denier can be selected. Computer connectivity enables statistical / graphical reports - optional.

Minimum length of 30 yards /60 yards /120 yards of yarn are required to be used to obtained yarn count Precision balance of capacity 210gms and sensitivity of 0.001 is used in this machine.(option of 310gms/0.01gram balance also available).

Net weight :4kg

Dimension : lengthdepthheight=1298.

Tearing Strength up to 6400g can be calculated.

Variable Capacity: 6400g, 3200g & 1600g.

Adjustable Knife to adjust pre cut length 20 mm.

Supplied with three calibrated weight to calibrate the each range.

Adjustable foots for leveling the equipment.

It gives very accurate results between 20 80 % of the capacity.

Variable Capacity : 6400 g, 3200 g & 1600 g

Accuracy : 1 % of full capacity

Calibration weights : 50 % reading of 6400 g

50 % reading of 3200 g

50 % reading of 1600 g

Cutting knife : Adjustable

Amith Garments Tearing Strength Tester is used to check tearing strength of fabric. Amith Garments Tearing Strength Tester is completely made of mild steel duly galvanized or chrome plated. Specially designed Jaw is provided to grip the sample firmly without slippage. Variable capacity: 6400 g, 3200 g & 1600 g. supplied with three capacity calibration weights. Adjustable cutting knife to set pre cut distance 20 mm.

The assessment of snap attachment strength is an important criterion especially in the design and manufacturer of garments for infants and children wear. The measurement of an uniform force applied to the snap attachment shall be recorded by means of a force- measuring device. Once the appropriate force is registered on the Imada Scale, a stopclock is used for recording set period of time.

Machine equipped with 0.5 kg, 1 kg & 2 kg load which is a stainless steel used in main body for robustness & resilience.

Supplied with calibration and inspection certificates with latest design.

Smooth precision engineered components for excellent performance complete with all accessories template, marking pen.

AATCC 128, ISO 9867 standards

Air permeability is the property of a fabric to allow passage of air through it under the effect of a difference in pressure across its two faces. It is defined as the volume of air passing through a defined area under a specified pressure difference over a known period of time. It is a very important property for fabrics that are used under conditions where it is necessary to know precisely the amount of air passing through them.

Test area : 10, 20, 50, and 100 cm

Rotameters : 9 to 90; 57 to 570; 470 to 4, 700; and 1, 570 to 15, 700 LPH

Pressure indicator : Electronic type with a pressure transducer and digital display to measure and indicate pressure upto 300 mm water column (least count 1 mm)

IS 11056 - 1984 : Method for Determination of Air Permeability of Fabrics

DIN 53887 : Testing of Textiles - Determination of the Air Permeability of Fabrics

ASTM D 737 : Standard Test Method for Air Permeability of Textile Fabrics.

Air permeability is the property of a fabric to allow passage of air through it under the effect of a difference in pressure across its two faces. It is defined as the volume of air passing through a defined area under a specified pressure difference over a known period of time. It is a very important property for fabrics that are used under conditions where it is necessary to know precisely the amount of air passing through them.

Test area : 10, 20, 50, and 100 cm

Rotameters : 9 to 90; 57 to 570; 470 to 4, 700; and 1, 570 to 15, 700 LPH

Pressure indicator : Electronic type with a pressure transducer and digital display to measure and indicate pressure upto 300 mm water column (least count 1 mm)

IS 11056 - 1984 : Method for Determination of Air Permeability of Fabrics

DIN 53887 : Testing of Textiles - Determination of the Air Permeability of Fabrics

ASTM D 737 : Standard Test Method for Air Permeability of Textile Fabrics.

Main Unit :01 No.

MBTL Fading Lamp (Mercury Blended Tungsten Lamp):1 No.

Type A Rectangular Cells :03 Nos.

Spring Mounted Cradles for Type A Rectangular Cells:03 Nos.

Specimen Card to prepare sample for testing (Pack of 18 cards):01 Pack

Double Slot Mask (2/3 area exposed) For Method- :03 Nos.

Type C Cylindrical Cells :50 Nos.

Unit to Pull Sample Holder Tray from Rectangular Cells :03 Nos

Flexible Tubing (Small) For connecting Type A Cells : 06 Nos.

Flexible Tubing (Big) For connecting the Water Circulation Unit :02 Nos.

Stainless Steel Clamps :12 Nos.

Random tumble pilling tester determines the resistance of textile fabrics both woven and knitted to the formation of pills and other related surface changes. The pills that occur during normal usage of fabric are simulated in test condition. This is done by random rubbing motion by tumbling test specimen in cylindrical test chamber with cork liners. The degree of fabric pilling is evaluated by comparing test specimen with standard photographs .They are rated 1-5 1 being very severe pilling and 5 no pilling.

Amith Garments Tensile Strength Tester is used to check tensile strength of fabric (Grab TEST), Seam Slippage & Lea Strength of yarn.

Amith Garments Tensile Strength Tester is completely made of mild steel duly painted. Specially designed one Inch Jaw, Lea Jaws are provided for grab test & lea strength respectively. 250 kg load cell with Digital display of load .variable speed 75 mm / min & 300 mm / min. supplied with complete accessories.

Latest model digital tensile strength tester for fabric & leas.

Works on CRE Principal.

Max Capacity: 250 kg. Accuracy: 100g.

Microprocessor based controller for the load cell.

Variable Speed: 300 mm/min & 75mm/min.

Digital display for test results.

Supplied with grab test, seam slippage & lea jaws.

Max aw separation: 1000mm.