Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

Antique Designer Tiles

Antique Designer Tiles
location GIDC, Morvi, Gujarat

Write a Review
Call Now Call Now

Our Products

  1. Adhesives 5 Products available
  2. Cement And Concrete 1 Products available
  3. Construction Services 1 Products available
  4. Garden Tools 1 Products available
  5. Sealants 1 Products available
  6. Unisex Clothing 1 Products available
  7. Wall Putty 1 Products available
  8. Mortar 1 Products available
  9. Building Hardware 1 Products available
  10. Cement Grout 1 Products available
  11. Others Products 5 Products available

Construction Services

Our product range contains a wide range of Sbr Waterproofing

SBR Waterproofing

SBR Waterproofing

We are Manufacturer and Supplier of SBR Waterproofing from Surat, Gujarat. Latex Waterproofing Adhesive is SBR based liquid and widely used for high performance applications such as waterproofing and repairing cracks. We pack Latex Waterproofing Adhesive in air-sealed bags to keep it free from moisture. For purchasing Latex Waterproofing Adhesive at pocket friendly rates, contact us.

 

Areas of Application :

  • As bond coating
  • Plaster to plaster, concrete to concrete, For plaster over brick masonry
  • As waterproof repair plaster
  • As crack repair
  • Plaster cracks more than 5 mm, In gaps developed between masonry and RCC members.
  • As coating for prevention of corrosion in rebars
  • Efflorescence (salt petre/damp surfaces)


Method of Application :Surface Preparation -

  • Surface for treatments must be thoroughly cleaned of all laitance, loose material, oils, grease, etc.
  • Mechanical means such as wire brushing, shot blasting can be used and finally vacuum cleaned of all loose
  • solids and liquids.
  • Before application ensure that the surface is damp but in a touch dry condition.
  • Curing - 3 to 5 days with a wet hessian or jute cloth, or water spray.

 
Features :

  • Excellent Coverage -70-80 sq.ft per kg/ in 2 coats, hence economical
  • Less material wastage- material does not fall back/ rebound, when used as bonding agent
  • High Bond Strength
  • Prevents leakage & dampness
  • Enhances strength of a repair mortar & provides durability


Precautions & Limitations :

  • Strictly do not dilute beyond recommendation
  • To be applied over damp substrate but in a dry to touch state
  • Not suggested for use in very critical concrete repairs
  • Waterproof coats with Antique Super Latex - 555 SBR must be protected with screeds/plasters
  • When applying as a bond coat, if it becomes dry, re-apply to reach a tacky state for overlay of concrete or mortar
  • 2nd coat of plaster with Antique Super Latex - 555 SBR may cause a problem in external painting of the surface


Technical Information :

  • Type - Styrene Butadiene Polymer Liquid
  • Color - White
  • Specific Gravity - 1.02 + 0.02
  • Storage Condition - Free from frost
  • Solid Content - 44 + 1%
  • For best result - use before 1 year if unopened
  • Consumption - 1 kg of super latex will cover 70 - 80 sq. ft. area in 2 coats
  • for a proportion mix 1:4:7 ( Super Latex : Water : Cement)


Packing : 250 g, 1 kg, 5 kg & 20 Kg

Features & Benefits

Areas of Application

Mix (Super Latex : Water : Cement)

Method of Application

As bond coat -

  • Plaster to plaster
  • Concrete to concrete
  • For plaster over brick masonry

1:4:7
  • Apply a single coat of the mixed quantity of
  • Antique Super Latex - 555 SBR
  • When coat is tacky, apply the plaster or concrete according to the situation
  • Always add cement to the liquid
  • ( Antique Super Latex - 555 SBR: water =1 : 4 )

As waterproof coating -

  • Residential Water tanks
  • Chajjas
  • Terraces
  • DPC
  • Over sunken slabs in bathrooms

1:4:7
  • Brush apply the 1st coat
  • Apply 2nd coat after 1st coat is dry approximately
  • 4 - 6 hrs between two coats
  • Overlay the 2nd coat with screed/plaster for protection and finish

As waterproof Repair Plaster

-
  • Mix 1 kg of Antique Super Latex - 555 SBR with pre-measured
  • water for 50 kg of cement.
  • Use this mix to add to the recommended dry plaster mixes
  • Plaster mixes may be as rich as 1:3 (cement:sand)
  • Keep water-cement ratio in Plaster as low as 0.4 but not more than 0.45
  • For better application apply a bond coat with super latex as suggested earlier
  • 2nd and final layer of plaster must not be mixed with super latex
  • Add Antique Super Latex - 555 SBR to the second coat plaster.
  • Take care to scratch-key the 1st coat surface for effective bond with the 2nd
  • coat
  • Bond coat over the 1st coat surface for effective bond with 2nd layer of plaster
  • is must to be removed

Crack Repair -

  • Plaster cracks more than 5 mm
  • In gaps developed between
  • masonry and RCC members

1:4:7
  • Mix 1 kg of with pre-measured
  • water for 50 kg of cement
  • Use this mix to add to the recommended dry mortar mixes
  • Mortar mixes may be as rich as 1:3 (cement:sand)
  • Keep water-cement ratio in Mortar as low as 0.4 but not more than 0.45
  • Clean the cracked area properly of all loose materials
  • Wet the crack completely using a bottle spray.
  • Apply a single coat as a bond coat prior to the crack filling of the
  • Antique Super Latex - 555 SBR as per the mixing proportions
  • mentioned earlier.
  • Fill the crack with above prepared mortar
  • Compact it into the crack fully and trowel finish to level

As coating for Prevention of
Corrosion in Rebars

1:4:7
  • Rusted rebars must be thoroughly scraped, by mechanical means if required
  • Brush apply a single coat of prepared mix over the rebars
  • Apply concrete/mortar when the coat is tacky

For 'salt petre'- free plaster
(efflorescence)Brick masonry

1:4:7
  • Brush apply the 1st coat on brick
  • Apply 2nd coat after 1st coat is dry
  • When 2nd coat is tacky, place plaster as per instruction in no.


View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.