Our Products
Servo Motors
2 Products availableWall Mounts
1 Products availablePotentiometer
1 Products availableHydraulic Actuators
1 Products availableElectric Actuators
1 Products availableAC Motor
1 Products availableAir Damper
1 Products availablePneumatic Actuator
1 Products availableElectric Fittings And Components
1 Products availableDC Motor
1 Products availableOur offered Product range includes Gear Hobbing, Modulating System For Oil-Fired Boiler, Motorized Potentiometer Panel Mounting, Rotary Mechanical Solenoid and Linkages.
We have in-house precision gear hobbing machines which can hob as minimum as 0.3 module to a maximum of 3.0 module over a range of materials. The maximum diameter of the blank that can be hobbed is 200mm for 3.0 module. We can hob spur, helical, bevel & worm profile gears. With the help of mitutoyo instruments for gear metrology, we are able to confirm the gear tooth measurements to the designdrawing. Apart from the gears for our internal consumption, we offer to undertake job work for gear hobbing.
A stepper motor is an electro mechanical device that converts electrical pulses into discrete mechanical motion as opposed to conventional motors with free running shafts. Many types of stepping motors exist with the permanent magnet (Hybrid) being the most popular. A variety of step angles are available, the widely used is the 1.80 per step or also referred to as the 200 step per revolution motor. The stepping action is achieved by switching the power to the motor windings, so that the motor phases are energized in a specific sequence. The motors have high holding torque when not being stepped, because of the current maintained in the motor winding.
The motorized potentiometers are classified depending on the type of voltage, motor, potentiometer, and mounting. The units are used in control systems to apply a command variable to automatic control equipment in the form of a variable reference input or set point signal. They can be operated remotely with the aid of push buttons. Two push buttons are used, one for "run-up" and the other for "run-down". The run-up & down durations can be changed; at any instant of time, depending on the model, these two durations can be different or a fixed value.
The Motorized Potentiometers are classified depending on the type of Voltage, Motor, Potentiometer, and Mounting. The units are used in control systems to apply a command variable to automatic control equipment in the form of a variable reference input or set point signal. They can be operated remotely with the aid of push buttons. Two push buttons are used, one for "Run-up" and the other for "Run-down". The run-up & down durations can be changed; at any instant of time, depending on the model, these two durations can be different or a fixed value.
Additional Information:
Payment Terms : T/T
Additional Information:
Payment Terms : T/T,
Delivery Time : 1 Week to 4 Weeks