Our Product / Services
We are the reliable manufacturer and supplier of the Rotary Valve , which is fitted below the cyclone separator & dust collector. Rotary Valve helps to separate material mixed in the air and ensures dust free operation. Specialty : Efficient working Precision design Wear and tear resistant Easy to clean Dust free operation Used For : All kind of powder & granules
ibbon mixers are a basic industrial mixing tool. They consist, basically, of a trough-shaped casing (usually 2 to 3 times longer than it is wide) with a semicircular bottom, fitted with a horizontal longitudinal shaft on which are mounted arms supporting a combination of ribbon blades, paddles or helical screws set at a fairly close clearance to the semicircular mixer body so that no layer of material remains on the bottom of the mixer. The most effective design of ribbon layout is the double spiral in which the outer ribbon moves the product in one direction and the inner ribbon moves it in the opposite direction. This creates axial flow and prevents any buildup of material moved by the blades as they rotate is relatively small so that mixing times can be long. The capacity of the mixer should not be exceeded otherwise the ribbon and/or blades are not effective and the surface layers of the powder do not get adequately mixed.
Ribbon mixers are normally operated at room temperature but they may be jacketed for steam heating (at atmospheric pressure)or water cooling, should this be called for .
Although ribbon mixers are relatively standard in design there are many modifications and commercial design options available depending on:
One does not normally fill this type of mixer to more than 50% of the available volume. Normally the capacity of this type of mixer is restricted to anupper limit of 15 m.
Sometimes, to improve the dispersion of ingredients in ribbon mixers, the ribbon blades are built to be close to the cylindrical wall to give high shearing. Sometimes the ribbons are also fitted with rubber wipers to ensure complete intermingling of the ingredients by lifting any packed material near the wall into the middle of the ribbon ensemble. It is difficult to predict the scale-up performance if one attempts to increase mixing captcity by going to a larger mixer of the same type.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 4 week
We have latest machines and cutting-edge technology thus, we ensure that the raw materials used are as per set standards and meet the international norms as well. We deliver only quality products, manufactured using the raw material. The transactions related to payment carried out between us and our clients are kept confidential. You details are not shared with anyone except the concerned personnel to ensure high level of security.
Dense Phase Pneumatic Conveying is suitable for transporting difficult, abrasive or friable materials and pushes material along a pipe in a plug form at relatively low velocities. This means minimal wear on pipes / bends, promoting minimum maintenance and long life. Efficient use of compressed air also gives low power consumption and operating costs.
Schenck Process is regarded as one of the world’s leading Dense Phase Pneumatic Conveying providers. Schenck Process’s range of Dense Phase Pneumatic Conveying Systems capitalise on all the assets of Pneumatic Conveying: Simplicity, Reliability and Flexibility.
Designed to be a simple and effective method of transferring material from single collection point to either a single or multiple reception points and can be used throughout many industries to transfer all types of bulk solid materials ranging from fine cohesive powders to wet lump coal.
Systems are available for handling material temperatures up to 450 degrees Centigrade and at rates of up to 100 tonnes / hour for distances up to 200 metres.
To provide the most effective system solution requires a range of pumps and pressure vessels depending upon the material and distances to be conveyed.
This is a vibrating circular inline screening machine in which material is fed from the top in a non vibrating hopper plate .Bags
Features : Latest Micro Controller based design. Rugged construction Heavy Duty Load Cell for rough handling Coarse and fine feed for better accuracy Applicat ions : Rice, Wheat, Pulses, Granules, Powder, Chemicals etc Options : PLC Based Controller, Printer Interface, Computer Interface, Remote Display, Higher Capacity, and Flame Proof
Additional Information:
Delivery Time : 15 DAYS
In powder two different dimensions in the mixing process can be determined: convective mixing and intensive mixing.[3] In the case of convective mixing material in the mixer is transported from one location to another. This type of mixing leads to a less ordered state inside the mixer, the components that must be mixed are distributed over the other components. With progressing time the mixture becomes more randomly ordered. After a certain mixing time the ultimate random state is reached. Usually this type of mixing is applied for free-flowing and coarse materials. Possible threat during macro mixing is the de-mixing of the components, since differences in size, shape or density of the different particles can lead to segregation. In the convective mixing range, Hosokawa has several processes available from silo mixers to horizontal mixers and conical mixers. When materials are cohesive, which is the case with e.g. fine particles and also with wet material, convective mixing is no longer sufficient to obtain a randomly ordered mixture. The relative strong inter-particle forces form lumps, which are not broken up by the mild transportation forces in the convective mixer. To decrease the lump size additional forces are necessary; i.e. more energy intensive mixing is required. These additional forces can either be impact forces or shear forces
Additional Information:
Delivery Time : 30 DAYS
A dust collector is a system used to enhance the quality of air released from industrial and commercial processes by collecting dust and other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector system consists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system. It is distinguished from air purifiers, which use disposable filters to remove dus
Additional Information:
Delivery Time : 30 DAYS
Every pneumatic system uses pipes or ducts called transportation lines that carry a mixture of materials and a stream of air. These materials are free flowing powdery materials like cement and fly ash. Products are moved through tubes by air pressure. Pneumatic conveyors are either carrier systems or dilute-phase systems; carrier systems simply push items from one entry point to one exit point, such as the money-exchanging pneumatic tubes used at a bank drive-through window. Dilute-phase systems use push-pull pressure to guide materials through various entry and exit points. Air compressors or blowers can be used to generate the air flow. Three systems used to generate high-velocity air stream are:
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : Wooden box