Gearbox & Gear Parts #8814277

We are offering a precision-engineered array of Worm Gears. Worm Gear and Worm Shaft pairings provide large speed reduction ratios with only one gear pairing in a more compact space when compared with other types of gears. These gears are widely used in various industrial applications for reducing the rotational speed of machines. We offer up to a maximum ratio of 100:1 with our products. Following industry-defined guidelines, we manufacture the entire range by utilizing contemporary machines, modernize technology, and prime-grade raw material. Another advantage of the Worm and Wheel gear pairings is the low-level noise they produce.

Internal gear is a gear with its teeth cut in the internal surface of a cylinder and meshes with spur gears. Internal gears are primarily used for planetary gear drives. In its manufacturing, because of its shape, the usual hobbing machine used in spur gear production cannot be used. Generally, it is made with a gear shaper (or gear shaping machine) equipped with a pinion cutter. Internal gears mesh with spur gears. Spur gears are generally seen as best for applications that require speed reduction and torque multiplication, such as ball mills and crushing equipment. However, gears with teeth parallel to the axis have higher demand.

A rack and pinion is a type of linear actuator that comprises a pair of gears which convert rotational motion into linear motion. This combination of Rack gears and Spur gears are generally called “Rack and Pinion”. Driving the pinion into rotation causes the rack to be driven linearly. Rack and pinion combinations are often used as part of a simple linear actuator, where the rotation of a shaft powered by hand or by a motor is converted to linear motion.  The maximum force that can be transmitted in a rack and pinion mechanism is determined by the tooth pitch and the size of the pinion. The rack carries the full load of the actuator directly and so the driving pinion is usually small so that the gear ratio reduces the torque required.

Spur gears are the most easily visualized common gears that transmit motion between two parallel shafts. Spur gears are used in mechanical applications to increase or decrease the speed of a device or multiply torque by transmitting motion and power from one shaft to another through a series of mated gears. Generally speaking, when two spur gears are in mesh, the gear with more teeth is called the “gear” and the one with the smaller number of teeth is called the “pinion”. These gears can be made to a high degree of precision. Spur gears are excellent at moderate speeds but tend to be noisy at high speeds.

Helical gears are one type of cylindrical gears with slanted tooth traces. Helical gears offer a refinement over spur gears. The leading edges of the teeth are not parallel to the axis of rotation but are set at an angle. Compared to spur gears, they have a larger contact ratio and excel in quietness and less vibration, and able to transmit large force. Since the gear is curved, this angling makes the tooth shape a segment of a helix. A pair of helical gears have the same helix angle but the helix hand is the opposite. Helical gears can be meshed in parallel or crossed orientations. The former refers to when the shafts are parallel to each other; this is the most common orientation.

We manufacture these gears by employing optimum quality raw material and sophisticated technology in adherence to the set industrial standards. Bevel gears are gears where the axes of the two shafts intersect and the tooth-bearing faces of the gears themselves are conically shaped. The pitch surface of bevel gears is a cone. Bevel gears are most often mounted on shafts that are 90 degrees apart but can be designed to work at other angles as well. Provided gears are extensively used in marine applications, power plants, street plants, cooling towers, and automotive industries. Owing to features like high strength, resistance to corrosion, and durability, our offered range has been able to earn a lot of popularity in the market.

A spiral bevel gear is a bevel gear with helical teeth. The main application of this is where the direction of drive from the drive shaft must be turned 90 degrees to drive the wheels. They are somewhat analogous to cylindrical type helical gears in that the teeth are angled; however, with spiral gears, the teeth are also curved. Spiral bevel gears have a strength, oscillation, and noise level advantage over straight bevel gears. The helical design produces less vibration and noise than conventional straight-cut or spur-cut gear with straight teeth. A spiral bevel gear set should always be replaced in pairs i.e., both the left hand and right-hand gears should be replaced together since the gears are manufactured and lapped in pairs.

We offer a wide range of Duplex Sprockets or Double Strand Sprockets with a single hub or both side hub extension as per ISO/BS/AS/DIN according to the requirement of our customers. A Duplex Sprocket is a profiled wheel with teeth, or cogs, that mesh with a chain, track, or other perforated or indented material. Apart from the standard M.S. material, we also manufacture Stainless Steel Roller Chain Sprockets in all sizes. We have Customized flexible manufacturing so we also make Non-Standardized Duplex Chain Sprocket. Duplex Sprocket manufacturer, supplier, dealers, and exporters in Mumbai. We use high grades and high-quality engineering alloy steel to provide best quality of the product.

Here at Asar Engineering, we manufacture a wide range of High-quality Quadraplex or four Strand Sprockets. We are well-known manufacturers, suppliers, and exporters of a wide array of Quadraplex/Four Strand Sprockets that are made as per high-quality standards. We have been manufacturing heavy machinery sprocket and chain in all standard. We also manufacture Customised sprockets as per the customer’s requirement. We use high grades and high-quality engineering alloy steel to provide best quality of the product.

Idler sprockets are a flat hub less sprocket, with a sealed bearing that allows the sprocket to rotate freely. The bearings used in our idler sprockets use a wide inner race to create spacing between components on a shaft.  We are one of the leading Idler Sprocket manufacturer, suppliers, dealers in Mumbai and exporter all over the world. Idlers are normally mounted in a fixed position on a fixed shaft or attached to a tensioner arm. We use high grades and high-quality engineering alloy steel to provide best quality of the product.

We are the leading manufacturer and exporter of Triplex Chain Sprockets. A Triplex Sprocket is a profiled wheel with teeth, or cogs, that mesh with a chain, track, or other perforated or indented material. We offer a wide range of Triplex Sprockets or Triple Strand Sprocket with a single hub or both side hub extensions as per ISO/BS/AS/DIN according to the requirement of our customers. We also manufacture Stainless Steel Roller Chain Sprockets in all sizes. Triplex Sprocket manufacturer, supplier, dealers in Mumbai, and exporter all over the world. We have Customized flexible manufacturing so we also make Non-Standardized Triplex Chain Sprocket. We use high grades and high-quality engineering alloy steel to provide best quality of the product.

We are the leading manufacturer and exporter of Industrial Chain Sprockets We offer a wide range of Simplex Sprockets or Single Strand Sprocket with single hub or both side hub extension as per ISO/BS/AS/DIN according to the requirement of our customer. Simplex Sprocket manufacturer, supplier, dealers and exporters in Mumbai. We have Customized flexible manufacturing so we also make Non-Standardized Simplex Chain Sprocket. We use high grades and high-quality engineering alloy steel to provide best quality of the product.

A conveyor sprocket or sprocket-wheel is a profiled wheel with teeth, or cogs, that mesh with a chain, track, or other perforated or indented material. The name 'sprocket' applies generally to any wheel upon which radial projections engage a chain passing over it. It is distinguished from a gear in that sprockets are never meshed together directly, and differs from a pulley in that sprockets have teeth and pulleys are smooth except for timing pulleys used with toothed belts. We are one of the leading Conveyor Sprocket manufacturers, suppliers, dealers in Mumbai, and exporters all over the world.