ASLI CHINA TEST EQUIPMENT CO LIMITED

Alaknanda, Delhi

xenon arc lamp aging solar simulated test chamber

product description:

xenon arc lamp aging solar simulated test chamber is a comprehensive climate testing machine, it can do climatic aging test, and also can do fading acceleration test under color effect or color changed. The test range including: dying and finishing, printing, leather, plastic, plyglass, painting, textile, printing ink, rubber and also the industry relative color. light fastness and fade grade can be known in short time. Those materials exposed at simulated sunlight to evaluated the material's light fastness performance. To simulate and strengthen the test according to light energy, temperature, rain fall or condensation, humidity, .etc these main climate factors. Adopt simulated sunlight spectrum's xenon arc light to create destructive waves under different environment. It can be used for choosing new materials, improving existing materials, or assessment of durability change after material composed.

1) dimension:

internal dimension : 1000 x 1000 x 1000 mm (w x h x d)

external dimension : 1600 x 2150 x 1550 mm (w x h x d)

2)temperature, humidity range:

temperature : rt+15 80 (under the condition without illumination and water sprayadjustable and controllable )

humidity: 30%98%r.h (under the condition without illumination and water sprayadjustable and controllable )

3)accuracy:

temp. Fluctuation:0.5; temp. Uniformity: 3

humidity fluctuation:2.5%r.h. ; humidity uniformity:5%r.h.

irradiance tolerance: 15w% / m ;

(note: above accuracy under the condition without water spray and illumination)

features:

1. Advanced design technology and concept,

2. Excellent technology of producing and outstanding system of quality management,

3. Xenon lamp tester can be the most realistic simulated solar spectrum, including ultraviolet,

visible and infrared.

4. Be tested in the range of the full spectrum, necessary for most textile sun and color fastness test.

5. To determine the color fastness and aging to sunlight, weather resistance, etc.

packaging & shipping

package: pp film first, and then 10mm foam between machine and the case, and outside is standard export plywood case.

warranty: one year free warranty for whole set machine, lifelong time maintainance.

service:oem service, design service, buyer lable service.

after-sale service: feedback within 2 hours after get the call.

company information

we are a long history testing equipment manufacturer, in the past 25 years, we devoted to simulation environmental testing equipment and mechannical vibration and shock testing machine. Xenon arc lamp aging solar simulated test chamber is our star products, and we had obtained the ce certification for this machine.

ASTM B117 Standard Programmable Spraying Used Salt Spray Test Equipment

Product Description

Programmable Spraying Used Salt Spray Test Equipment is designed with wide application to test corrosion resistance performances for surface treatment for various materials that includes Paint, electroplating, organic and inorganic coating process, anode process, anti-rust oil etc.

Standard Compliance- ASTM B117 Standard Programmable Spraying Used Salt Spray Test Equipment

ASTM B117 Salt Spray(Fog) Test

ASTN D1654 Standard Test Method For Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

ASTM D3359 Standard Test Methods for Measuring Adhesion By Tape Test

JIS H8502 Methods of Corrosion Resistance Test For Metallic Coatings

IEC 60068-2-11-1981 Basic Environmental Testing Procedures Part 2: Tests, Test Ka: Salt Mist

IEC6802-52 1996 Environmental Testing-Part 2: Tests-Test Kb: Salt mist, cyclic (Sodium Chloride Solution)

GJB 150.11A-2009 Laboratory Environmental Test Methods For Military Material- Part 11: Salt Fog Test

CNS 4159 CASS Test-Copper Accelerated Acetic Acetic Acid Salt Spray (Fog) Test

CNS 4158 Method of Salt Spray Fog Test for Surface Finishing

MIL-STD810F Environmental Engineering Considerations and Laboratory Tests

MIL-STD 202 Test Method Standard: Electronic and Electrical Component Parts

MIL-STD 883 Test Method Standard: Microcircuits

MIL-STD 1344 Test Methods For Electrical Connector

SH - 90 ( 270L)

Internal Dimension (mm):W900xH500xD600;

External dimension (mm):W1400xH1200xD900

Material

1.Test chamber material :PVC board

2.The chamber sealed by impact-resistany acrylic board.

3.Saturated air barrelsSUS304 stainless steel(excellent high temperature& high pressure resistant performance)

Constant temperature control settable

(A)Salt Spray Test: NSS, ACSS

1.testing zone temperature : 35+/-2

2.Saturated air barrels temperature : 47+/-2

(B)Corrission resistance test:

1.Laboratory: 50+/-2

2.Saturated air barrels: 63+/-2

Packaging & Shipping

Package: PP film first, and then 10mm foam between machine and the case, and outside is standard export plywood case.

Short introduction about ASLi factory:

We are a long history testing equipment manufacturer, in the past 28 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine. ASTM B117 Standard Programmable Spraying Used Salt Spray Test Equipment is our star products , and we had obtained the CE certification for this machine .

ASLi main test equipments:

Environmental chambers, temperature (humidity) chamber, Thermal shock chamber, PCT /Hast chamber (Highly accelerated stress test chamber), ESS chamber, Walk in stability chamber, Vacuum oven, electrodynamic vibration shaker, mechanical shock tester, environmental combined vibration chamber, etc

customized high and low temperature thermal shock test chamber

ts-80-c (80 liters)

1.interior dimension : w500*h400*d400mm

2.exterior dimensionw1500*h1900*d1500mm

3. structurehigh temperature zone, low temperature zone, testing zone

4. internal material : sus#304 hardy heat-resistant stainless steel

5. outter shell material : sus#304 sus#304 hardy heat-resistant stainless steel

testing specific:

"gb/t 2431.1-2001 testing a: low temperature testing method

gb/t 2431.2-2001 testing b: high temperature testing method

gjb 150.3-1986: high temperature

gjb 150.4-1986: low temperature

iec68-2-1 test a: cold

iec68-2-2 test a: dry

gb 11158 high and low temperature test term

gb/t 2423.2 >

specifications

the customized high and low temperature thermal shock test chamber is the perfect testing machine of electronic components, metal, chemical materials, automation components, communication module, national defense industry, aerospace industry, bga, pcb substrate, electronic chip ic, semiconductor ceramic and high polymer materials, magnetic materials.

test standards

1.gb/t2423.1-1989

2.gb/t2423.2-1989

3.gb/t2423.22-1989

4.gjb150.5-86

5.gjb360.7-87

6.gjb367.2-87 405

7.sj/t10187-91y73

8.sj/t10186-91y73

9.iec68-2-14

10.gb/t 2424.13-2002

11.gb/t 2423.22-2002

12.qc/t17-92

13.eia 364-32

our company

we are a long history testing equipment manufacturer, in the past 28 years, we devoted to simulation environmental testing equipment and mechanical vibration and shock testing machine.programmable thermal shock test chamber is our star products , and we had obtained the ce certification for this machine .

more customized high and low temperature thermal shock test chamber information, please don't hesitate to send your inquiry.