ASLI CHINA TEST EQUIPMENT CO LIMITED

Alaknanda, Delhi

Application:

PCT-55 Highly Accelerated Stress Tester, PCT/ HAST Chamber with CE Certificationis widely applied for the testing of sealing property for multi-layer circuit board, IC sealing package, LCD screen, LED, semi-conductor, magnetic materials, NdFeB, rare earths and magnet iron, in which the resistance to pressure and air tightness for above mentioned products can be tested out.

Performance

1. Temp.Range: ( RT+15) 143 Free setting (saturated steam temperature).

2. Humidity Range : 100%RH (default value of saturated steam humidity )

3. Pressure Range: (ambient pressure) 0.5Kg/cm2 4.0Kg/cm2 Absolute pressure; (safe pressure capacity 4Kg/cm2 = 1 environmental pressure + 3Kg/cm2 )

4. Time Range : 0 999H / M / S; programmable touch screen controller for free setting is optional.

PCT-55 Highly Accelerated Stress TesterFeatures:

1. Automatic adding water function, and automatic filling water upon the water short storage while testing.2. Automatic operation to test process finished, easy to use.3. Temperature control: LED digital temperature controller can make accurate testing of temperature setting, control and display.4. LED digital timer, when the inner box's temperature reached the setting value, then start to time to ensure the test complete.5. Accurate pressure: temperature chart always shows the inner box's pressure and relative humidity.6. Water device is automatically discharge not saturated steam in order to achieve the best steam quality.7. A integrated silic gel door gasket, air tightness is very good, and long operation life.8. The inner box is mirror-polished , graceful and non-pollution

For the package:

1. PP film first2. Vacuum package3. PP film again4. 10mm thickness PU foam to avoid collision5. stronged plywood case6. Standard ASLI CASE MARK

Heated humidification system:

1.Adopt U-TYPE SUS#304ss Electric heat pipe heater2.Humidify barrel made of SUS#304ss, with observation glass and electromagnetic valve ofwater level3.Idepently heat, wet humidify, dehumidify system. 4.With auto heating, wetting and demist function, with observation glass and imported tube. 4.Humidification water recycling, automatic filling water system, 25L built in draw-out typewater tank .

Technical Parameters:

Customized High Pressure Unsaturated HAST Chamber

Application:

Customized High Pressure Unsaturated HAST Chamber is widely applied to the testing of sealing property for multi-layer circuit board, IC sealing package, LCD screen, LED, semi-conductor, magnetic materials, NdFeB, rare earths and magnet iron, in which the resistance to pressure and air tightness for above mentioned products can be tested out.

Parameters:

1. Model: HAST-35

2. Internal Dimension xD (mm): 350x450

3. External Dimension xD (mm):850x1300x900

4. Steam Temperature Range: Steam Temperature Range: 100135, (143 is optional)

5. Relative Pressure/ Absolute Pressure:

Relative pressure: the pressure gauge value

Absolute pressure: the pressure gauge value adds 100 Kpa (The actual value in the inner box)

6. Steam Humidity: 70100R.H. steam humidity adjustable

7. Steam Pressure (Absolute Pressure): 101.3Kpa +0.0Kg/cm2 2.0Kg/cm2; (3.0Kg/cm2 is special standard)

8. Recursive Device: Steam in forced-circulation

9. Safety Protective Devise: Water short storage protect, over pressure protect.(have automatically/manual water replenishing, automatically discharge pressure function )

10. Accessories: Two layers stainless steel plate

Customized High Pressure Unsaturated HAST Chamber features:

1. Automatic adding water function, and automatic filling water upon the water short storage while testing.

2. Automatic operation to test process finished, easy to use.

3. Temperature control: LED digital temperature controller can make accurate testing of temperature setting, control and display.

4. LED digital timer, when the inner box's temperature reached the setting value, then start to time to ensure the test complete.

5. Accurate pressure: temperature chart always shows the inner box's pressure and relative humidity.

6. Water device is automatically discharge not saturated steam in order to achieve the best steam quality.

7. A integrated silica gel door gasket, air tightness is very good, and long operation life.

8. The inner box is mirror-polished , graceful and non-pollution

Acceleration Mechanical Shock Tester (SS Series) for Battery Impact Test

Product Description

Acceleration Mechanical Shock Tester is designed for measuring and ensure shock performance of products and packages. It can do normal shock test with half sine wave, square wave, sawtooth wave etc., simulate products under real environment shock conditions, thus improve and perfect products package structure.

Test Parameters:

1. Impact table dimension: 120x120 mm

2. Max. Load Capacity: 5 kg

3. Pulse width: (For half sine wave 0.518 ms).

4. Acceleration of shock peak value: (half sine wave 15015000 m/s2)

5. Shock pulse Wave: half sine wave

6. Shock direction: 3 axis (6 direction)

7. Avoid secondary shock device: hydraulic friction brake

8. Lifting method: digital height setting, hydraulic lifting

9. Shock control measurement system one set

10. Weight of impact table, approx. 600kg

11.External dimension , approx.:800x2200x900mm

12.Power : AC220V, 1 phase 3 lines, 60hz

13. Test point: 150 G (peak acceleration) and pulse 6 ms (duration

Mechanical Shock Test Machine Specifications

1.Built-in self-protection device, no secondary impact,

2.Shock height controlled by digital

3.Good repeatability test data

4.Signal generator provides a variety of choice: half sine wave, trapezoidal wave, sawtooth wave, square wave, etc.

5.Good vibration isolation performance, impact on the environment can control within the scope of the requirements:

6.Good Safety performance.

7.Conform to the IEC, MIL, GJB, JIS, ASTM and other international and domestic standard shock waves;

Standard:

This test equipment in line with the standard GJB360A-96-213 mechanical shock test conditions and UN38.3, GB/T2423.5-1995 the electrical and electronic products environmental test procedure test Ea: basic impact test method and the IEC68-2-27, test the Ea: shock "and" MIF - STD202F "specification for impact test requirements.

mechanical transportation simulator vibration tester for astm d999 vibration testing

product description

simulation transport vibration tester / transportation vibration test table is the assessment of the actual road conditions capability of the specific load of each item in the laboratory to simulate the impact, vibration, etc. experienced by the car during transportation on the highway to obtain the actual working conditions in the laboratory. the effect of the packaging, packaging, or internal product, thereby providing a basis for the assessment or confirmation of the packaging of the article.

model as-100

max. load (kg) 100

effective area wd (mm) 12001000

rotating speed (rpm) 150300rpm

amplitude 25.4mm (1inch)

time setting (approx.) 0999 hours

starting time setting 015 seconds

mode of vibration reciprocating type

weight (kg) 200

specifications

1. low price, the price is only 10% of similar products in the united states;

2. digital instrument display vibration frequency;

3. synchronous mute belt drive;

4. the specimen is clamped with rail, easy to operate, safe;

5. the base of the machine adopts heavy-duty trench with damping pad, easy installation, smooth operation, no need to install the foot screw;

6. dc motor speed, smooth operation, strong load capacity;

7. rotary vibration (commonly known as racing), in line with european and american transport standards;

any needed about mechanical transportation simulator vibration tester for astm d999 vibration testing, please feel free to contact me.

electromagnetic vibration testing machine simulated transport vibration tester

product description

electromagnetic vibration testing machine simulated transport vibration tester is widely used in defense, aviation, aerospace, communications, electronics, automobiles, home appliances, and other industries. this type of equipment is used for discovering the early faults, simulating the actual working condition and the structure strength test, the product application is wide, the application width is obvious, the test effect is remarkable and reliable. sine wave, fm, sweep, programmable, frequency multiplier, logarithm, maximum acceleration, amplitude modulation, time control, full function computer control, simple fixed acceleration/fixed amplitude. equipment through continuous failure to run 3 months of testing, stable performance, reliable quality.

electromagnetic vibration testing machine parameter:

technical parameters of the whole system

1. model: es-1 es-2 es-3.es-350

2.rated sine force (n): 1000 to 3500000

3.rated random force (n): 1000 to 3500000

4.frequency range (hz): 3 to 3500

5.rated acceleration(m/s2): 400 to 1000

6.rated velocity(m/s): 1.2 to 1.8

high frequency vibration test machine feature

1. well-designed dynamic circle skeleton, with a higher stage axial resonance frequency.

2. two-magnetic circuit, magnetic flux leakage low, compact structure and rational.

3. rocker rod roller bearings straight and import-oriented composite body stiffness orientation, eccentric load capacity.

4. trunnion isolation foundation dedicated to hormone use, the installation of mobile convenience.

5. advanced technology move around the system to ensure that the dynamic circle of high reliability.

for horizontal expander:

within small loading bench to realize higher acceleration and working frequency, to improve the loading capacity and performance of whole machine bench.

horizontal bench and vibration bench are integral type, with perfect structure, convenience to install and adjust

static pressure track, v-shape, with capacity of slope-resistant and bias-loading resistant.

built-in oil pump, good structure and easy operating.

lcd touch screen ozone aging resistance tester

application:

lcd touch screen ozone aging resistance tester price is used to test the ozone environment, the characteristics of crack-resistant rubber, ozone resistance testing machine, can control and adjust the concentration of ozone environment, to determine the anti-ozone properties of the specimen. The equipment can comply with the standard: jisk6259 astm1149 iso1431 gb/ttb62 gb/t13642

technical parameters:

1.temperature range:(rt+15)65

2.humidity range of test chamber: 60%95%r.h. controllable

3.temperature control precision 0.5

4. Temperature distribution precision 2.0

5. Ozone density range: 11000pphm

6. Sample shelve (optional, rotating speed rate: 15 rpm)

7. Ozone density fluctuation: 10% (international standard)

8. Ozone flow :1 80l / min

9. Wind circulation in inner chamber:centrifugal fan forced convection circulation

lcd touch screen ozone aging chamber features:

1. Stainless steel inside and outside

2. Outside made iron with powder coating

3. Durable ozone generator

4. Insulation material is high-density glass fiber cotton

5. bottom is universal round wheel and fixed foot

6. Window materials is multilayer steel-glass, the inside is chip conductive

for the package:

1. Pp film first

2. Vacuum package

3. Pp film again

4. 10mm thickness pu foam to avoid collision

5. Stronged plywood case

6. Standard asli case mark

asli main test equipments:

environmental chambers, temperature (humidity) chamber, thermal shock chamber, pct /hast chamber (highly accelerated stress test chamber), ess chamber, packing materials ozone aging resistance tester, walk in stability chamber, vacuum oven, electrodynamic vibration shaker, mechanical shock tester, environmental combined vibration chamber, etc