Listing ID #3815529
Company Information
Ask for more detail from the seller
Contact SupplierAdditional attachment extra cost :
Internal Grinding Attachment, Balancing Stand, Balancing Mandrel, Three Points Steady Rest, Two points Steady Rest, Radius Truing Device, Spare wheel Flange, Independent Four Jaws Chuck, Magnetic Coolant Pump, Grinding Gauge.
Dimensions | 305-455 | 600-800 | 1000 | 1250 | 1500-2000 |
Table Swivel | 9+3 | 9+3 | 6+3 | 6+3 | 6+3 |
Centre Height | 130 mm | 130 mm | 150 mm | 155 mm | 220 mm |
WORK HEAD | |
Work Head Speeds r.p.m. 3 Steps (SGI 305/455/600/800 mm) | 50 to 350 |
Morse Taper Center | No. 3 |
Work Head Speeds r.p.m. 4 steps (SGI 1000-1250/1500-2000 mm) | 35 to 350 |
Morse Taper Center | No 4 to 5 |
Work Head Swivel | 90 degree |
TABLE | |
Traverse speeds 4 steps (Mechanical) | 80 to 385 mm/min. |
Traverse speed step-less (Hydraulic) | 50 to 1000 mm/min |
WHEEL HEAD | |
Rapid approach to all machines | 50 mm |
Wheel head with a hand wheel (305/455/600/800) | 80 mm |
Wheel head with a hand wheel (1000/1250) | 100 mm |
Wheel head with a hand wheel (1500/2000) | 170 mm |
Increments of feed dial | 0.005 mm |
Swivel of wheel head | 45-45 degree |
Wheel speeds (SGI 305/455/600/800 mm) | 1800-2000 |
Standard size of wheel | 355 x 25.4 x 127 mm or 355x 38 x 127 mm |
Wheel speeds (SGI 1000/1250 mm) | 1500-1800 |
Standard size of wheel | 406 x 38 x 127 mm |
Wheel speeds (SGI 1500/2000 mm) | 1200-1500 |
Standard size of wheel | 508 x 50.80 x 254 mm |
POWER | |
Wheel head (SGI 305/455/600/800/1000/1250 mm) | 3 H.P. / 5 H.P. |
Wheel Head (SGI 1500/2000 mm) | 5 H.P. / 7.5 H.P. |
Work Head (SGI 305/455/600/800 mm) | 0.5 H.P. |
Work Head (SGI 1000/1250 mm) | 1 H.P. |
Work Head (SGI 1500/2000 mm) | 1.50 H.P. |
Mechanical Table (SGI 305/455/600/800/1000/1250) | 0.5 H.P. |
Mechanical Table (SGI 1500/2000) | 1 H.P. |
Hydraulic | 1/2 H.P. |
Coolant Pump | 0.10 H.P. |
Internal Grinding Attachment | 1 H.P. |