AU-Mex Ltd.

Prague, Czech Republic

Garapa certainly deserves its great reputation gained from its solidity and durability, stability in changing weather conditions and decorative appearance. Various colours from light brownish yellow shade to medium-dark brown colour. It is necessary to prevent contact with iron objects Ã�¢ï¿½ï¿½ black stains formation! Possible without surface treatment Ã�¢ï¿½ï¿½ wood gains grey-silver shade, view side = coarse line

We are a quality centric company and have established a modern warehouse that is equipped with an up-to-the-minute inventory control system. This has helped us in maintaining the quality of the products for a longer time. Stay rest assured for the products that we offer as they will remain damage free. For this, we make use of only premium packaging material for the packing of the products.

Stable in size, resistant and entirely ecological wood, Thermowood supplied by us is made useng WTT method which uses thermal treatment of wood at 180°C, No chemicals are used during the thermal treatment. Only a little bit of water is needed to start the process. The rest takes place thanks to a gradual increase of temperature inside of a pressurised chamber (7-9 bars). Gradual heating of the wood releases moisture and creates an environment full of steam that ensures even colouring and treatment of the wood. Thanks to this process the wood is environment friendly and doesn’t endanger surrounding fauna or flora.
Before the actual thermal treatment, the wood is pre-dried to 12-14% of moisture content. An important part of the WTT process is that the wood is never dried out completely. On the contrary, the remaining moisture content stays at 6-8%. This is the final humidity for thermo-wood.
Modern technology controls the entire manufacturing process and thereby guaranteeing a uniform treatment of the wood. Thanks to this treatment the pine changes its original naturally light yellow tone to a light dark colouring.
The wood obtains significantly improved dimensional stability and thereby reducing the woods vulnerability to deformation respectively swelling and shrinking of the wood. Dimensional changes are reduced by up to 60%. The wood shows increased resistance to rot and mould and also improved insulation properties.
Coat and colour If you opt for treating your thermo-wood decking with a coat to prevent it from naturally turning grey (occurs approx. 1 year after installation) we recommend to use OSMO Decking oil n. 010 Thermo-wood oil. OSMO Decking oil is a coat based on natural plant oils and waxes and thanks to these materials is this coat not harmful to health in any way. The pigment contained in this coat doesn’t cause any significant change in the natural tone of the thermo-pine, on the contrary the tone gets even more enhanced and furthermore the wood is protected from the UV rays that are the main cause of the wood turning grey. Do not however put the coat on any sooner than 3 months after installation.

During these 3 months the wood will naturally loose some of the substances :

• Dimensions - 26 x 117 mm length 3 – 5, 10 m in 30 cm +, Grading side = smooth (smooth on both sides)
• Dimensions - 26 x 140 mm length 3 – 5, 10 m in 30 cm +, Grading side = smooth (smooth on both sides)
• Dimensions - 26 x 140 mm length 3 – 5, 1 m, in 30 cm +, Grading side = reeded

The most common coniferous forests in the world are larch forests, and the most important taiga is Siberian larch. This is valid especially for the West-Siberian lowlands, this species also climbs to the upper border of the forest. In broader spectrum the Siberian larch also extends into north-east Europe. Just in Russian federation the larch forests cover approx. 264 mils. ha. which is around 38% of their forest lands. Trees in Siberia reach up to 40m and around 400 years of age. The point of origin for Siberian larch is the West-Siberian lowlands, southern part of the mountainous central Siberia, to the west it reaches into Europe until the south-eastern edge of the white see and almost to the edge of lake Onega, to the east it goes through Asia until the Baikal lake and to the southeast until Mongolia. It grows from southern Asian borders of former USSR until the northern border of the tundra. Siberian larch grows from almost sea-level to 2250 above. It grows from widespread lowlands up until the Alpine border of mountain forests. Highest occurring in Altai (up to 3700m above sea level).

Colour : Yellow-white to red-white sapwood, core-wood red-brown to dark red-brown, darkens. During stronger heating from the sun resin can seep through.

The most common coniferous forests in the world are larch forests, and the most important taiga is Siberian larch. This is valid especially for the West-Siberian lowlands, this species also climbs to the upper border of the forest. In broader spectrum the Siberian larch also extends into north-east Europe. Just in Russian federation the larch forests cover approx. 264 mils. ha. which is around 38% of their forest lands. Trees in Siberia reach up to 40m and around 400 years of age. The point of origin for Siberian larch is the West-Siberian lowlands, southern part of the mountainous central Siberia, to the west it reaches into Europe until the south-eastern edge of the white see and almost to the edge of lake Onega, to the east it goes through Asia until the Baikal lake and to the southeast until Mongolia. It grows from southern Asian borders of former USSR until the northern border of the tundra. Siberian larch grows from almost sea-level to 2250 above. It grows from widespread lowlands up until the Alpine border of mountain forests. Highest occurring in Altai (up to 3700m above sea level).

Colour : Yellow-white to red-white sapwood, core-wood red-brown to dark red-brown, darkens. During stronger heating from the sun resin can seep through.

Small to midsized tree that originates from north=east Brazil and Guyana, Exceptionally fine, uniformly structed and straight-growing wood has purplish red-brown color with various tones. Colour differences between individual planks are natural and common. The wood can have some insect damage that doesn’t affect the static properties or durability. Wood is very hard and lasts very long thanks to high density and contained substances. These oil substances may be washed out by rain during the first period i tis exposed to weather conditions. Due to this fact the wood used for decking or balconies has to be used in such a way that rainwater coming offo f i tis taken away by guttering. The decking surface has to be treated with oil approx. 2-3 months after installation when the natural reduction in contained substances occurs. Without the treatment the wood remains unharmed and in time the surface will turn silver-grey. You can get great optical value with OSMO Decking oil. For correct functionality of the decking it is necessary to follow basic rules for installation of wooden decking and creating suffciently stable construction underneath. The underlying construction should be made of wood with same or similar density as the actual decking to ensure uniform swelling or shrinkage. For correct maintenance and cleaning ask our sales representatives for technical conditions and guidelines for maintenance of wooden decking.

Coat and colour : If you opt for treating your decking with a coat to prevent it from naturally turning grey we recommend to use OSMO Decking oil n. 014 Massaranduba oil, naturally coloured. The pigment contained in the coat is adapted to the natural of Massaranduba wood. The wood is protected from the UV rays that are the main cause of the wood turning grey. Do not apply the coat any sooner than approx. 3 months after installation for reasons stated earlier.

Teak is a deciduous tropical wood. Most of Teak trees reach an average height of 9-11m with the trunk diameter 1-1.5m. Teak originates from Burma and also grows in India, Thailand, Indonesia and Java.
Teak decking is supplied only from Burmese Teak in classication Select&Better, articially dried to 16-18%. True Burmese teak has narrow, light yellow-brown sapwood and dark gold-brown core wood that darkens to medium or dark brown on the surface in air. Burmese Teak has predominantly straight bres. Teak is easy to work with, for connections it is necessary to pre-drill holes. Teak wood has a very high durability. Without treatment Teak decking will remain unharmed although its colour will gradually change from yellow-brown to silver-grey. Teak wood has a high content of oily substances that prevent optimal adhesion of the coat.
It is therefore necessary to weather the wood after installation for 2-3 months before rst surface treatment. For correct functionality of the decking it is necessary to follow basic rules for installation of wooden decking and creating suciently stable construction underneath.

Coat and colour : If you opt for treating your decking with a coat to prevent it from naturally turning grey we recommend to use OSMO Decking oil n. 007 Decking oil, transparent or n. 430 anti-slip decking oil. Bear in mind that both of these coats are colourless and therefore protect only partially from the UV rays only in combination with pigmented rst oil coat from the OSMO Decking oils line followed by an anti-slip decking oil or Teak oil can the decking be protected. As a standalone transparent coat the OSMO Anti-slip decking oil and Teak oil are both unsuitable for uncovered decking that is heavily burdened with sun. if the wood has already turned grey, treat the surface with OSMO Gelem against wood greyness n. 6609 and re-do the whole treatment again.

Garapa wood, also called Brazilian Ash is deciduous wood with high durability. Garapa comes mainly from South America, from Brazil. Garapa wood is a light yellow-brown wood that darkens to medium brown on the surface in air. Garapa has predominantly straight bres. After drying Garapa’s density is 800-1000 kg/m3, on average 900 kg/m3. It dries slowly and has good stability. Colour dierences between individual planks are natural but are not too signicant. The wood is very hard and lasts very long thanks to high density and concentration of contained substances. These can slow down the drying process and prevent sucient adhesion of the coat. That is why it is recommended to allow it to weather for 2-3 months before the rst nish. You can get great optical value with OSMO Decking oil. For correct functionality of the decking it is necessary to follow basic rules for installation of wooden decking and creating suciently stable construction underneath. The underlying construction should be made of wood with same or similar density as the actual decking to ensure uniform swelling or shrinkage. For correct maintenance and cleaning ask our sales representatives for technical conditions and guidelines for maintenance of wooden decking. Garapa wood is very durable.
Coat and colour: If you opt for treating your decking with a coat to prevent it from naturally turning grey we recommend to use OSMO Decking oil n. 013 Garapa oil, naturally coloured. The pigment contained in the coat is adapted to the natural of Garapa wood. The wood is protected from the UV rays that are the main cause of the wood turning grey. Do not apply the coat any sooner than approx. 2-3 months after installation for reasons stated earlier.

Trees that originate mainly in Malaysia, Decking from the Bukit wood classed Select&Better is supplied articially dried to 16-18%. Thanks to this drying the wood is more durable and dimensionally stable. Its core is red-brown to brown in colour in its raw form. Colour dierences between individual planks are natural and common. The core that doesn’t always get rid of lighter sapwood has high resistance to mould and insect. The growth rings are not noticeable, dried wood is without stench. The wood may have some insect damage that doesn’t aect its static properties or durability. Wood is very hard and lasts very long thanks to high density and contained substances. These oil substances may be washed out by rain during the rst period it is exposed to weather conditions. Due to this fact the wood used for decking or balconies has to be used in such a way that rainwater coming o of it is taken away by guttering. The decking surface should be treated with oil approx. 2 months after installation when the natural reduction in contained substances occurs. Without the treatment the wood remains unharmed and in time the surface will turn silver-grey. You can get great optical value with OSMO Decking oil. For correct functionality of the decking it is necessary to follow basic rules for installation of wooden decking and creating suciently stable construction underneath. The underlying construction should be made of wood with same or similar density as the actual decking to ensure uniform swelling or shrinkage. For correct maintenance and cleaning ask our sales representatives for technical conditions and guidelines for maintenance of wooden decking.
Coat and colour : If you opt for treating your decking with a coat to prevent it from naturally turning grey we recommend to use OSMO Decking oil n. 006 Bangkirai oil, naturally coloured. Which is a great match for Bukit wood. The pigment contained in the coat is adapted to the natural of Bangkirai wood. It is almost the same colour as Bukit wood. The wood is protected from the UV rays that are the main cause of the wood turning grey. Do not apply the coat any sooner than 2 months after installation as stated earlier.

Dimensions :

• 18 x 140 mm 1, 8–4, 8 m in 30 cm +, Grading side = planed
• 19 x 90 mm 2, 4–4, 5 m in 30 cm +, Grading side = reeded, With tongue and groove on transverse side
• 28 x 145 mm 2, 4–4, 5 m in 30 cm +, Grading side = grooves

Bangkirai represents very resistant, hard and long lasting wood, immune to fungi and mould, and they do not penetrate inside due to high density of bangkirai balau species. It is a tropical core wood of grey-brown to reddish-brown colour. The variable rotary growth is characteristic for bangkirai balau wood. The surface may show small apertures caused by insect living only in live wood, small pitch pockets and minor cracks. However, these occurrences do not have any effects on the wood characteristics. Growth rings are not noticeable, dry bangkirai wood is odour-free. During the first months, tannin contained in bangkirai balau wood can be washed out e.g. during rain, and cause stains to the plaster, stone, and constructions. If we leave bangkirai balau wood without maintenance, it will gain beautiful grey-silver colour in time. This can be prevented by means of a suitable paint finish such as bangkirai oil of Osmo Color series. Pay attention to contact with metals, always use stainless screws for fitting, otherwise distinctive stains difficult to remove may occur on wood.

Bangkirai Yellow Balau (Shorea laevis) are trees that come from the following Asian countries: India, Pakistan, Sri Lanka, Burma, Thailand, Laos, Vietnam, Cambodia, Malaysia, Philippines and Indonesia.
Decking from the Bangkirai wood is supplied air-dried with moisture no more than 25%. The core has in its fresh form yellow-brown to greenish look, often it darkens to olive-brown. Colour dierences between individual planks are natural and common. As one of the most resistant woods the core wood, that doesn’t always get rid of lighter sapwood, shows high resistance to rot and mould. The growth rings are not noticeable, dried wood is without stench. The wood can have some insect damage that doesn’t aect the static properties or durability. Wood is very hard and lasts very long thanks to high density and contained substances. These oil substances may be washed out by rain during the rst period it is exposed to weather conditions. Due to this fact the wood used for decking or balconies has to be used in such a way that rainwater coming off of it is taken away by guttering. The decking surface has to be treated with oil approx. 2-3 months after installation when the natural reduction in contained substances occurs. Without the treatment the wood remains unharmed and in time the surface will turn silver-grey. You can get great optical value with OSMO Decking oil. For correct functionality of the decking it is necessary to follow basic rules for installation of wooden decking and creating suciently stable construction underneath. The underlying construction should be made of wood with same or similar density as the actual decking to ensure uniform swelling or shrinkage. For correct maintenance and cleaning ask our sales representatives for technical conditions and guidelines for maintenance of wooden decking.


Density : 850-1155 kg/m³

Coat and colour: If you opt for treating your decking with a coat to prevent it from naturally turning grey we recommend to use OSMO Decking oil n. 006 Bangkirai oil, naturally coloured or n. 016 Bangkirai oil dark. The pigment contained in the coat is adapted to the natural of Bangkirai wood. The wood is protected from the UV rays that are the main cause of the wood turning grey. Do not apply the coat any sooner than 2-3 months after installation as stated earlier.

Massaranduba is exceptionally fine, evenly structured and straight growing wood with purple, red-brown colour with various shades. The colour differences in massaranduba between individual boards are natural and common. Massaranduba wood may include holes from insect which do not affect the durability and static feature. Massaranduba wood is very hard and has long durability due to high density and contained substances. These oily contained substances can be washed out with rain during the first phase of exposure to weather conditions. Due to the above reason, massaranduba wood must be placed on decking or balconies in such way water flowing from wood is drained by means of eaves and rain gutters. Decking surface made from massaranduba should be treated with oil approximately 2 months after it is placed, and natural reduction of oil substances from the wood surface occurs. Without the treatment massaranduba wood remains undamaged, and grey-silver pattern occurs on the wood surface in time. Decking oil OSMO Color for Massaranduba helps the wood visual value for a long time. A correct function of the decking requires the compliance with basic rules for laying wooden decking and the creation of sufficiently stable base construction. The base construction requires the use of wood with the same or similar density as the surface wood in order to enable equal expansion and shrinking.

Small to midsized tree that originates from north=east Brazil an d Guyana
Exceptionally fine, uniformly structured and straight-growing wood has purplish red-brown colour with various tones. Colour differences between individual planks are natural and common. The wood can have some insect damage that doesn't affect the static properties or durability. Wood is very hard and lasts very long thanks to high density and contained substances. These oil substances may be washed out by rain during the first period it is exposed to weather conditions. Due to this fact the wood used for decking or balconies has to be used in such a way that rainwater coming off of it is taken away by guttering. The decking surface has to be treated with oil approx. 2-3 months after installation when the natural reduction in contained substances occurs. Without the treatment the wood remains unharmed and in time the surface will turn silver-grey. You can get great optical value with OSMO Decking oil. For correct functionality of the decking it is necessary to follow basic rules for installation of wooden decking it is necessary to follow basic rules for installation of wooden decking and creating sufficiently stable construction underneath. The underlying construction should be made of wood with same or similar density as the actual decking to ensure uniform swelling or shrinkage. For correct maintenance and cleaning ask our sales representatives for technical conditions and guidelines for maintenance of wooden decking.

Density : approx. 1100kg/m³

Decking made from Massaranduba wood important notice

• 25 x 145 mm : this profile is supplied in an air-dried state meaning that it's moisture is between 22-25%. Its moisture is an important attribute in the case of this material. the water content in the decking piece affects wheather the shape and dimensions of the product stay unchanged or swell or shrink. Inside wood there is “free water” and “bonded water”. Free water is in the cavities of cells and bonded water is inside the cellular walls. Free water evaporated first out of the material, during this process no significant dimensional changes occur.

• That is why it is advantageous to choose the right time for decking installation when using this material as higher temperatures and prolonged drought is not suitable for installation. Wood however also contains bonded water. It evaporates until the wood reaches a state of so-called moisture equilibrium. The rate of evaporation of the bonded water depends on a few factors:
  • The higher the density, the slower the evaporati on
  • The higher the surrounding temperature, the faster the evaporation and danger of material warping and cracking
  • The lower the moisture in the wood, the slower the drying.
  • Other influences that do not cause any significat dimensionalchanges of the decking pieces.

   

Wood is a hygroscopic material and therefore changes its shape in relation to the air humidity. This process of moisture alteration in correlation to air humidity and temperature is reversible but not linear. For the same relative humidity and temperature of air is the wood moisture higher during adsorption than during absorption, atrelativehumidityofairRH30-90% by2.5-3.5%. that means that the wood will shrink during evaporation but doesn’t return to its original shape after absorbing the water back. This fact has Major influence on the behaviour of  decking made from massaranduba in an air-dried state.
Technical list for Massaranduba material states tangential drying 9-12%, radial 6-6.8%. During the course of the year there are changes in humidity of the air, long term rain, snow, thawing and the planks will increase its volume during such period although approx. 2.5-3.5% of its current width. Furthermore, it is important to realize that the plank are cut in different orientations towards the axis of the trunk, tangential, radial, but also semi-radial, which affects the drying in dimensional percentages thereby creating different sizes of clefts even though it was installed with identical dilatation. We recommend dilatation of 6-8mm.

n 21x145 mmThis profile is supplied in artifically dried form, meaning the moisture in the wood ranges from 16% to 18%.Thanks to artifical drying the wood is more dimensionally stable. We recommnend a dilatation of 5-7 mm between individual planks. Material experiences only small dimensional changes after installation.

Conclusion : Any material from wooden massive installed in the outer areas will not remain calm will constantly work according to effects of surrounding environment.

Coat and colour : If you opt for treating your decking with a coat to prevent it from naturally turning grey we recommend to use OSMO Decking oil n. 014 Massaranduba oil, naturally coloured. The pigment contained in the coat is adapted to the natural of Massaranduba wood. The wood is protected from the UV rays that are the main cause of the wood turning grey. Do not apply the coat any sooner than approx. 3 months after installation for reasons stated earlier.

We are counted among distinguished suppliers of Bukit Decking Wooden Decking catering to buyers across diverse markets. We are capable of delivering the orders in a safe manner at customer's end and for this; we have a capacious warehouse that is installed with all required amenities required for safe storage.

Description of Bukit wood for decking : Bukit decking wood is wood for decking belonging to category Dark Red Meranti. Bukit wood is indicated as light Hardwood with average density 739 kg/m3 in air-dried state. The bukit colour spectrum is from dark red to light red colour. Due to the colour spectrum, the customers evaluate Bukit wood as one of the most beautiful. Decking wood bukit is delivered only in artificially dried state 16-18% which provides smaller wood deformations. Due to its resistance, bukit wood is suitable for large rooms and external areas. It shows high dimension stability and minimum deformation hazard. Bukit wood with its features became generally nominated to the extremely popular wood with wide ranging utilization, e.g. - Decking, garden furniture, interior floor, wooden facades or entry exterior door and windows are also made from this wood.

Decking from the Bukit wood classedSelect&Better is supplied articially dried to 16-18%. Thanks to this drying the wood is more durable and dimensionally stable. Its core is red-brown to brown in colour in its raw form. Colour dierences between individual planks are natural and common. The core that doesn’t always get rid of lighter sapwood has high resistance to mould and insect. The growth rings are not noticeable, dried wood is without stench. The wood may have some insect damage that doesn’t aect its static properties or durability. Wood is very hard and lasts very long thanks to high density and contained substances. These oil substances may be washed out by rain during the rst period it is exposed to weather conditions. Due to this fact the wood used for decking or balconies has to be used in such a way that rainwater coming off of it is taken away by guttering. The decking surface should be treated with oil approx. 2 months after installation when the natural reduction in contained substances occurs. Without the treatment the wood remains unharmed and in time the surface will turn silver-grey. You can get great optical value with OSMO Decking oil. For correct functionality of the decking it is necessary to follow basic rules for installation of wooden decking and creating suciently stable construction underneath. The underlying construction should be made of wood with same or similar density as the actual decking to ensure uniform swelling or shrinkage. For correct maintenance and cleaning ask our sales representatives for technical conditions and guidelines for maintenance of wooden decking.

Density: 505-850 kg/m³

Coat and colour: If you opt for treating your decking with a coat to prevent it from naturally turning grey we recommend to use OSMO Decking oil n. 006 Bangkirai oil, naturally coloured. Which is a great match for Bukit wood. The pigment contained in the coat is adapted to the natural of Bangkirai wood. It is almost the same colour as Bukit wood. The wood is protected from the UV rays that are the main cause of the wood turning grey. Do not apply the coat any sooner than 2 months after installation as stated earlier.

Siberian larch for decking is recognized for its beauty of many fine and well ingrown knags. Growth rings are much denser in Siberian larch then in pine, therefore the larch texture may have livelier effects. Larch wood has tendency to turn grey without surface treatment, and due to its natural feature it is popular in raw application without paint finish. People who prefer the wood clean colour and maintained wood colour can prevent the grey shade partially by applying a suitable treatment from series Osmo Color oils, however we recommend leaving this decking wood in natural state due to the resin content. Siberian larch due to high level of resin is recognized for high density, mechanical and biological resistance lading to the conclusion that it is highly resistant to damage from rot and insect, however the wood has a tendency to form longitudinal cracks despite all the positive points. Pay attention to contact with metals, always use stainless screws for fitting, otherwise distinctive stains difficult to remove may occur on wood.

Utilizing state-of-the-art packaging tools and superior grade supplies, we pack our products and help them remain protected from external damages. Furthermore, the packages are labeled properly for information. With the complete help and support of our team members and management, we conduct strict checking on the quality of raw inputs used for manufacturing.

Description : We deliver teak decking solely from Myanmar in classification A-Grade (1 fce clear), kiln dried to moisture content 16 18%. Real Burmese teak has narrow, light yellow-brown sapwood and dark gold-brown wood which darkens outside on the surface to medium or dark brown. Burmese teak has mostly direct fibration. Teak is suitable for shaping. It is necessary to pre-drill holes for connection. Teak wood is very durable. Without treatment, teak wood decking remains undamaged; however its colour gradually changes from yellow-brown to silver-grey in time. In order to maintain the original colour, it is necessary to treat the wood and we recommend the most suitable paint composition - 2 coats with one of special wood oils OSMO COLOR with pigment base (not 007 colour-free teak oil) or 1 coat with one of special wood oils OSMO COLOR with pigment base (not 007 colour-free teak oil) and 1 coat with special wood oil with antislip effects (oil contains dense organic additive with evenly spread antislip particles in the paint. The particles connect upon application and remain on the surface after drying. In case of sheltered decking it is possible to use 2 thin coats of special wood oil 007 colour-free teak oil or 2 thin coats of special wood oil with antislip effect no. 430. A correct function of the decking requires the compliance with basic rules for laying wooden decking and the creation of sufficiently stable construction.

Teak Javasky pochazí z Javy a je obvykle o neco svetlejsi nez teak z Barmy.
Java Teak has a narrow, light yellow-brown sapwood and dark golden-brown core wood that darkens to medium or dark brown on the surface in air. Java Teak as opposed to Burmese has a livelier structure and a wider range of colours. It is easy to work with. It is necessary to pre-drill holes for connections. The surface of Teak is easy to nish and as the most appropriate coat we recommend OSMO special decking oils.

Taking care of Teak wood : Same rules apply as for Burmese Teak – see page 41

Installation : Our decking planks from Java Teak are supplied with tongue-groove connection. These planks allow for sucient water drainage and thanks to the bevelling on the edges each piece is highlighted. Furthermore, thanks to this connection there is no need to crosscut the planks. If you want to keep the decking without the visible screws use either T-stick or a connecting clamp with a decking screw.
T-stick is used for installation of decking planks from calm woods with thickness no more than 20mm with small dimensional changes, that have grooves for this clamp on their sides or such grooves have to be cut during installation. T-stick is made of a plastic cross reinforced with glass bres that is resistant to weather conditions and a plate and screw from stainless steel. Distance of 9mm from the underlay allows for good circulation and prevents the formation of permanent moisture. Durability and functionality of your decking is increased.

With tongue an d groove on transverse side

• Dimension s : 20 x 120 mm
• 0, 9 – 2, 2 m in = cm +
• Grading side = smooth

How to calculate the correct amount of T- T-STICKS ?

• Spacing between the individual underlay timber pieces: up until
• 400mm
• Width of decking planks 120mm, dilatation gap 5mm 5000mm/400mm = 12.5 (13) rows
• 5000mm (120+5) = 40 rows = 40 decking planks = 40 xed points 40x13 =520 pieces of xed points on 25 m2 of decking = 21 T-Stick pieces for 1 m2.

We have hired experienced personnel to handle and supervise the task of packaging in a systematic order. Thus, there are minimal chances of damage from our end as our experts check the entire lot before dispatch. Buyers will not regret purchasing our products, as they conform to industrial quality management standards.

Details :

• Pine wood for terraces, dimensions - 21 x 130 mm 4 + 5 or 3 m Pine wood for terraces, Boards without pressure water-proofing View side - coarse line Pine wood for terraces,
• Processing - Without pressure water-proofing or with pressure water-proofing Volmanit green colour. Fine lines on both sides. Dried to 16 - 18 % Pine wood for terraces wrapped in foil: 1 package - 5 pcs, 1 pallet - 125 pcs
• Dimensions - 25 x 130 mm, 4 + 5 or 3 m, boards with pressure water-proofing, view side - coarse line.

Colour : sapwood yellow-white or red-white, core wood red-yellow, darkens to brown-red. Contains higher amount of resin that can seep out during stronger heating from the sun. Density: approx. 450 kg/m3.

Usage : wood furniture from massive, windows, doors, facades, flooring.

Coat and colour : If you opt for treating the decking with a coat to prevent the natural process of thewood turning grey, we recommend the use of OSMO Decking oil in the preferred tone except transparent tone n. 007. OSMO Decking oil that contains pigment ensures visual value of the wood and its protection from UV rays. Protecting the pine wood on decking is recommended.

Parameters :

• Dried to : 16-1 8%
• Versions : with or without pressure impregnation Volmanit green coloured.
• Both sides reeded.

There are over 100 known species of pine growing practically only on the northern hemisphere, from sea-level to about 4000m above sea-level (highest growing are in Mexico respectively China) from the tropics almost to the subarctic area. In Europe there is 12-13 original species of pine. In Czech there are only 3 indigenous species: Pinus sylvestris, Pinus rotundata and Pinus mugo. European pins have 3 categories (climatetypes): Nordic, steppe and mountain.

• Nordic pine – grows north of the river Elbe and from the bottom of Carpathian Mountains, to the north of Ukraine and South-Russian steppes to the east of Siberia.
• Steppe pine – take up narrower discontinuous strip along the south-eastern border of Europe and south border of West- Siberian area.
• Mountain pine – appear on the remaining area of south and central Europe, scattered predominantly in mountain ranges.

Clients can rely on us for payment related procedure as we have adopted both online and offline modes for making safe and secure transactions. We have a team of quality inspectors who check the entire lot of raw material on several counts, prior to procurement. Thus, quality of the finished products is never fortified.

Details :

• Ipe dimensions - 21 x 145 mm, 2.13 - 5.8 m at 30 cm
• Ipe botanical name - Tabebuia spp.
• Ipe origin - Jizni a Stredni Amerika
• Ipe wood density - approx 1200 kg/m3
• Other possibilities - Production of exterior terraces, ship boards, ship rails, and ship hulls. This wood is also used in the construction industry.

Ipe description and surface treatment :

• Variety of colours from light or dark chocolate brown to olive brown.
• It is necessary to prevent contact with iron objects – black stains formation!
• It is generally considered strong and very hard. Grain is straight but also embedded in spirals which might sometimes lead to more difficult workability - particularly due to irregular texture varying from fine to medium. Due to high degree of hardness, density and high content of substances in wood, its service life is long. These substances contained in the wood might slow down the drying process and prevent sufficient adhesion of paint. Therefore; it is highly advisable to let the Ipe wood weather for at least 2 - 3 months before applying first surface treatment. After this period of time, it is advisable (in order to maintain the original colour of the wood) to treat the wood. We recommend application of 2 layers of one of the OSMO COLOR oils - special oils for wood with a pigment basis. Thus the wood can be visually enhanced for a long period of time.
• Possible without surface treatment – wood gains grey-silver shade.

The wood can be found throughout South and Central Americas and also in the Caribbean area. Usually known as Ipe but also known as lapacho or ironwood. Trees can reach up to 45m in height.
Ipe wood is light to dark chocolate-brown, sometimes turning olive-brown. Colour dierences between individual planks are natural and common. Ipe wood is generally regarded as strong and very hard. Fibres are straight but also deposited in a spiral pattern which can cause harder processing of the wood especially due to uneven texture that changes from ne to medium. Ipe is a very heavy kind of wood, density of the dried wood is up to 1200 kg/m3. It is in all aspects a very durable wood and after drying becomes very stable. Thanks to high density, hardness and content of substances it lasts very long These substances may slow down the drying process and prevent optimal adhesion of the coat. That is why it is crucial to allow Ipe wood to weather for 10-12 months before the rst oil coat so that some of the substances may escape naturally and the wood becomes ready to accept the oil coat. Ipe wood is one of the densest in the world and that is why the time it takes for the contained substances to be washed out after installation is almost a whole year.
For correct functionality of the decking it is necessary to follow basic rules for installation of wooden decking and creating suciently stable construction underneath. The underlying construction should be made of wood with same or similar density as the actual decking to ensure uniform swelling or shrinkage. For correct maintenance and cleaning ask our sales representatives for technical conditions and guidelines for maintenance of wooden decking.

Coat and colour : If you opt for treating your decking with a coat to prevent it from naturally turning grey we recommend to use OSMO Decking oil n. 010 Thermowood oil, naturally coloured, which suits Ipe wood perfectly. The wood is protected from the UV rays that are the main cause of the wood turning grey. Do not apply the coat any sooner than approx. 10-12 months after installation for reasons stated earlier.

Density : approx. 1200 kg/m3

Features

• Dimesions : 21 x 145 mm
• 2, 13–5, 80 in 30 cm +
• Grading side smooth

We understand that the use of finest grade raw material brings forth high quality product line. In addition to this, we make sure that the material is sourced from the reliable places only. Our payment procedure is not only easy but also safe ensuring your long-term reliance upon us. Whether it is online payment procedure, cash, bank deposits or others, we are here to guide you throughout the process.

Details :

• Garapa dimensions  - 25 x 145 mm, 2.13 - 5.8 m at 30 cm +
• Garapa botanical name - Apuleia leiocarpa
• Garapa origin - South America - Brazil
• Garapa wood density - 800 - 1000 kg/m³

Garapa description and surface treatment :

• Garapa certainly deserves its great reputation gained from its solidity and durability, stability in changing weather conditions and decorative appearance.
• Various colours from light brownish yellow shade to medium-dark brown colour.
• It is necessary to prevent contact with iron objects – black stains formation!
• Possible without surface treatment – wood gains grey-silver shade, view side - coarse line

Further application : Production of exterior terraces, ship boards, ship rails, and ship hulls. It is also used in joinery for staircases and cladding, in docks and ports for piers, etc., and for garden furniture.

Garapa wood, also called Brazilian Ash is deciduous wood with high durability. Garapa comes mainly from South America, from Brazil.
Garapa wood is a light yellow-brown wood that darkens to medium brown on the surface in air. Garapa has predominantly straight bres. After drying Garapa’s density is 800-1000 kg/m3, on average 900 kg/m3. It dries slowly and has good stability. Colour dierences between individual planks are natural but are not too signicant. The wood is very hard and lasts very long thanks to high density and concentration of contained substances. These can slow down the drying process and prevent sucient adhesion of the coat. That is why it is recommended to allow it to weather for 2-3 months before the rst nish. You can get great optical value with OSMO Decking oil. For correct functionality of the decking it is necessary to follow basic rules for installation of wooden decking and creating suciently stable construction underneath. The underlying construction should be made of wood with same or similar density as the actual decking to ensure uniform swelling or shrinkage. For correct maintenance and cleaning ask our sales representatives for technical conditions and guidelines for maintenance of wooden decking. Garapa wood is very durable. Coat and colour: If you opt for treating your decking with a coat to prevent it from naturally turning grey we recommend to use OSMO Decking oil n. 013 Garapa oil, naturally coloured. The pigment contained in the coat is adapted to the natural of Garapa wood. The wood is protected from the UV rays that are the main cause of the wood turning grey. Do not apply the coat any sooner than approx. 2-3 months after installation for reasons stated earlier.

Density : approx. 900 kg/m³.

Our packages are designed to provide maximum protection to the product from mechanical damage and logistical jostling. Additionally, the package is labeled to provide important details. Our organization is highly concerned towards providing excellent quality products to the customers and thus check them at all stages.

Details :

• Kapur dimensions - 28 x 145 mm 1.8 - 5.7 m at 30 cm 
• Kapur botanical name - Dryobalanops spp.
• Kapur Origin - Malaysia

Kapur Description : Kapur is included amongst wood indicated as medium Hardwood with average density 800 kg/m³ in air-dried state. It is yellow-brown to red-brown wood. Kapur is delivered in dried state to approximately. 16-18%, the wood is therefore calmer and more stable. Kapur decking wood contains camphor oil with typical odour in fresh wood. Other features and parameters are similar to Bangkirai wood. View side - coarse line

We deliver decking from Merbau wood air-dried with moisture content approximately 20%. The core wood is brown-grey to dark red-brown with various shades. The colour differences between individual boards are natural and common. The core wood which does not always lose its lighter white shades, shows high resistance to mould and insect. Growth rings are not noticeable, dry wood is odour-free. Wood exposed to external environment can show minor cracks and splits at the board ends due to the variation of relative air moisture. The wood contains high level of resin indicated in the occurrence of gold-yellow veining. The wood is very hard and has long durability due to high density and contained substances. These oily contained substances can be washed out with rain during the first phase of exposure to weather conditions. Due to the above reason, the wood must be placed on decking or balconies in such way water flowing from wood is drained by means of eaves and rain gutters. Decking surface should be treated with oil approximately 2 months after it is placed, and natural reduction of oil substances from the wood surface occurs. Without the treatment the wood remains undamaged, and grey-silver pattern occurs on the wood surface. Decking oil OSMO COLOR colour-free or bangkirai oil helps the wood visual value for a long time. A correct function of the decking requires the compliance with basic rules for laying wooden decking and the creation of sufficiently stable construction. The base construction requires the use of wood with the same or similar density as the surface wood in order to enable equal expansion and shrinking. For correct maintenance and cleaning refer to the maintenance instructions for decking boards.

This wood can be found in south-east Asia, predominantly in Indonesia, Thailand and Malaysia in coastal areas and higher altitudes up to 400 metres above sea level.

Merbau decking is supplied air-dried with approx. 20% moisture. Core wood is brown-grey to brown-red with dierent shades. Colour dierences between individual planks are natural and common. The core that doesn’t always get rid of lighter sapwood has high resistance to mould and insect. The growth rings are not noticeable, dried wood is without stench. Wood that is exposed to weather conditions may have tiny cracks on the end of the planks, caused by changes in relative air-humidity. This wood contains a higher amount of resin which can be seen as golden-yellow vein-like streaks in the wood. It is very hard and lasts very long thanks to high density and contained substances. These oil substances may be washed out by rain during the rst period it is exposed to weather conditions. Due to this fact the wood used for decking or balconies has to be used in such a way that rainwater coming o of it is taken away by guttering. The decking surface should be treated with oil approx. 3 months after installation when the natural reduction in contained substances occurs. Without the treatment the wood remains unharmed and in time the surface will turn silver-grey. You can get great optical value with OSMO Decking oil. For correct functionality of the decking it is necessary to follow basic rules for installation of wooden decking and creating suciently stable construction underneath. The underlying construction should be made of wood with same or similar density as the actual decking to ensure uniform swelling or shrinkage. For correct maintenance and cleaning ask our sales representatives for technical conditions and guidelines for maintenance of wooden decking. Density: 850-1100 kg/m3 Coat and colour: If you opt for treating your decking with a coat to prevent it from naturally turning grey we recommend to use OSMO Decking oil n. 016 Bangkirai oil dark. Which is a great match for Merbau wood. The pigment contained in the coat is underlines the natural colour of Merbau wood. The wood is protected from the UV rays that are the main cause of the wood turning grey. Do not apply the coat any sooner than 3 months after installation as stated earlier.

In order to keep the quality of the products up to the mark, we check the entire range against varied quality parameters. We make sure that the packing of our products is done using quality materials and advanced machines. Our packaging experts handle the entire task of packaging keeping in mind the requirements of the clients.

Description : Wood surface treatment. Sapwood is whitish; sap 2-5cm wide, core wood is light reddish to red-brown. It is necessary to prevent contact with iron objects black stains formation! After drying this wood is medium stable in shape, simple and clearly processed, it shows evenly smooth surface, it can be well polished and surface treated. We recommend all cut edges to be treated with OSMO wax for cut edges no. 5735.

Details :

• Dimensions - 40 x 140 mm 2.4 - 6.1 m at 30 cm
• Botanic name - Thuja plicata
• Origin - West Canada
• Wood density - 340 460 kg/m³

Further Application : The faade wood for construction cladding, view decoration house walls, pergola, fences, garden furniture, and for flooring exterior wood. Considering flooring wood, it is necessary to consider that locations with light pressure marks may occur due to relatively low wood density.

“Western red Cedar”, in nature also known as “the tree of life”. Botanically “Thuja plicata” belongs to Cupressaceae. The area of spread of western red Cedar is west part of North America from Alaska to California and east to Montana. Trunks can grow to a knotless height of 25m. the trees can reach up to 1000 years of age. The wood of western red Cedar is quite cold-resistant.

Colour : sapwood is whitish and 2-5cm wide, core wood is reddish brown to red-brown, often variable. Density of dried wood ranges depending on the width of the age-rings between 340-460 kg/m3. After drying the wood has average dimensional stability, is easy and clean to work with, shows evenly smooth surface, easy to polish and nish. The moisture upon delivery is approx. 18-20% for exterior ooring wood and 10-12% for facades. Cedar wood has been highly priced even in ancient times. Contains resin, that gives it its typical smell. The contained substances may leak out from areas of fresh cuts and cause colouring of the walls. Therefore, we recommend to treat all cut edges with OSMO Wax for cut edges n. 5735. With western red Cedar in exterior constructions it is absolutely essential to use non-corroding fastening means. Natural light greyness after almost half a year of exposure to weather is normal and doesn’t aect its quality and durability. Colour dierences between individual planks are natural but are not too signicant.
For correct functionality of the decking it is necessary to follow basic rules for installation of wooden decking and creating suciently stable construction underneath. The underlying construction should be made of wood with same or similar density as the actual decking to ensure uniform swelling or shrinkage. For correct maintenance and cleaning ask our sales representatives for technical conditions and guidelines for maintenance of wooden decking. Coat and colour: If you opt for treating your decking with a coat to prevent it from naturally turning grey we recommend for facade wood to use a chosen tone of OSMO Protective oil coat for wood or OSMO UV protective oil n. 428 Cedar semi-matt. For decking we recommend OSMO Decking oil. Fro red Cedar wood great match is Decking oil n. 006 Bangkirai oil, naturally coloured.

Density : 340-460 kg/m3

Decking wood:

• Dimension s : 40 x 140 mm 2, 40–6, 1 m, in 30 cm + selected „Knotted”
• Grading side = smooth (both sides smooth – choose the better side)

Facade wood : (profile classic)

• Dimension s : 17, 5 x 137 mm
• 1, 80–6, 1 m, in 30 cm + dimension is charged including the tongue, covering width 127 mm)

We, along with our packaging professionals, ensure that the range of products meets current requirements, for that reason we make use only qualitative packaging material, procured from the renowned vendors. In order to attain complete client credibility, we let the clients' to choose either online mode or offline mode for making payment. And, we guarantee for authenticity and confidentiality.

Details :

• Thermowood pine dimensions - 26 x 140 mm, Top side - Reeded
• Thermowood pine - profile : View side - REEDED
• Thermowood pine - description and surface treatment - Pine and ash Thermowood is recognized for good dimensional stability. The moisture fluctuation is prevented due to the thermal treatment of the wood. The tendency for moisture deformations, i.e. swelling and subsequent shrinking, is decreased by up to 60%.
• Paint and colour - Thermally treated wood can be treated, if used in outdoor conditions, by application of coating preferably on an oil-wax basis OSMO COLOR - oil for Thermowood. The re-application of the OSMO COLOR shall be carried out, based on need, approx. once a year. Without this protective coating a natural grey-silver pattern appears on the wood surface after approx. 12 - 15 months.

Thermowood supplied by us is made useng WTT method which uses thermal treatment of wood at 180^oC

• No chemicals are used during the thermal treatment. Only a little bit of water is needed to start the process. The rest takes place thanks to a gradual increase of temperature inside of a pressurised chamber (7-9 bars). Gradual heating of the wood releases moisture and creates an environment full of steam that ensures even colouring and treatment of the wood. Thanks to this process the wood is environment friendly and doesn’t endanger surrounding fauna or flora
• Before the actual thermal treatment, the wood is pre-dried to 12-14% of moisture content. An important part of the WTT process is that the wood is never dried out completely. On the contrary, the remaining moisture content stays at 6-8%. This is the final humidity for thermo-wood. Modern technology controls the entire manufacturing process and thereby guaranteeing a uniform treatment of the wood. Thanks to this treatment the pine changes its original naturally light yellow tone to a light dark colouring.
• The wood obtains significantly improved dimensional stability and thereby reducing the woods vulnerability to deformation respectively swelling and shrinking of the wood. Dimensional changes are reduced by up to 60%. The wood shows increased resistance to rot and mould and also improved
• insulation properties.

Coat and colour

• If you opt for treating your thermo-wood decking with a coat to prevent
• it from naturally turning grey (occurs approx. 1 year after installation) we recommend to use OSMO Decking oil n. 010 Thermo-wood oil. OSMO Decking oil is a coat based on natural plant oils and waxes and thanks to these materials is this coat not harmful to health in any way. The pigment contained in this coat doesn't cause any significant change in the natural tone of the thermo-pine, on the contrary the tone gets even more enchanced and futhermore the wood is protected from the UV rays that are the main cause of the wood tumming grey. Do not however put the coat on any sooner than 3 months after installation. During
• these 3 months the wood will naturally loose some of the substances within and it will finish stabilizing after the thermal treatment.