26 X 140 Thermo Wooden Deckings

We, along with our packaging professionals, ensure that the range of products meets current requirements, for that reason we make use only qualitative packaging material, procured from the renowned vendors. In order to attain complete client credibility, we let the clients' to choose either online mode or offline mode for making payment. And, we guarantee for authenticity and confidentiality.
Details :

• Thermowood pine dimensions - 26 x 140 mm, Top side - Reeded
• Thermowood pine - profile : View side - REEDED
• Thermowood pine - description and surface treatment - Pine and ash Thermowood is recognized for good dimensional stability. The moisture fluctuation is prevented due to the thermal treatment of the wood. The tendency for moisture deformations, i.e. swelling and subsequent shrinking, is decreased by up to 60%.
• Paint and colour - Thermally treated wood can be treated, if used in outdoor conditions, by application of coating preferably on an oil-wax basis OSMO COLOR - oil for Thermowood. The re-application of the OSMO COLOR shall be carried out, based on need, approx. once a year. Without this protective coating a natural grey-silver pattern appears on the wood surface after approx. 12 - 15 months.

Thermowood supplied by us is made useng WTT method which uses thermal treatment of wood at 180^oC

• No chemicals are used during the thermal treatment. Only a little bit of water is needed to start the process. The rest takes place thanks to a gradual increase of temperature inside of a pressurised chamber (7-9 bars). Gradual heating of the wood releases moisture and creates an environment full of steam that ensures even colouring and treatment of the wood. Thanks to this process the wood is environment friendly and doesn’t endanger surrounding fauna or flora
• Before the actual thermal treatment, the wood is pre-dried to 12-14% of moisture content. An important part of the WTT process is that the wood is never dried out completely. On the contrary, the remaining moisture content stays at 6-8%. This is the final humidity for thermo-wood. Modern technology controls the entire manufacturing process and thereby guaranteeing a uniform treatment of the wood. Thanks to this treatment the pine changes its original naturally light yellow tone to a light dark colouring.
• The wood obtains significantly improved dimensional stability and thereby reducing the woods vulnerability to deformation respectively swelling and shrinking of the wood. Dimensional changes are reduced by up to 60%. The wood shows increased resistance to rot and mould and also improved
• insulation properties.

Coat and colour

• If you opt for treating your thermo-wood decking with a coat to prevent
• it from naturally turning grey (occurs approx. 1 year after installation) we recommend to use OSMO Decking oil n. 010 Thermo-wood oil. OSMO Decking oil is a coat based on natural plant oils and waxes and thanks to these materials is this coat not harmful to health in any way. The pigment contained in this coat doesn't cause any significant change in the natural tone of the thermo-pine, on the contrary the tone gets even more enchanced and futhermore the wood is protected from the UV rays that are the main cause of the wood tumming grey. Do not however put the coat on any sooner than 3 months after installation. During
• these 3 months the wood will naturally loose some of the substances within and it will finish stabilizing after the thermal treatment.