Pune, Maharashtra, India
Our Products
WATERPROOF IP65 DIGITAL Mini plunger dial, 0.001mm/0.00005inch reading, accurate inductive measuring system, RS232 output, sealed module against water/coolants/oils, Hardened & ground SS plunger & stem.
MODEL 38 Back side plunger Dial gauge, Tungsten carbide ball anvil. Strong & smooth metal bezel, rigid brass case for more regidity.
FEATURES:
Self-centralizing feature of this dial bore gauge ensures that measurement can be done with minimum skill. Bore size 50-150mm wide range, high wear resistance due to carbide tipped fixed and moveing anvils.
FEATURES:
Excessive web deflection is dangerous for the engine. The cause may be faulty or damaged crankshaft, damaged bearing, poor bearing alignment, excessive bearing clearance or slackness, faulty flanging to transmission, flywheel or Vee Belt pulley, etc.
FEATURES:
A Thread Depth Gauge developed specifically to monitor compliance with safety requirements for minimum trade depth of automobile tyres. Additionally, it is useful for gauging general tyre wear in the range of 0-8 mm.
FEATURES:
The Bowers Universal Gauges ingenious modular design enables it to be quickly configured to suit almost any measuring challenge, both internal and external. The Universals clever constant measuring pressure device ensures accuracy and consistency of reading.A large variety of measuring contacts and adaptors are available for the Universal Gauge enabling countless measuring tasks to be completed with ease. Accessories for the measurement of threads, grooves, splines, gears, hole centers and many others are available as standard and special adaptations for more non-standard applications can be quoted on request.
FEATURES:
The new MicroGauge 2-point bore gauging system has been designed specifically for the measurement of small bores between 1.0-6.0 mm. Featuring a completely new digital readout and extremely compact overall dimensions, the MicroGauge is truly a pocket-sized instrument. Digital readout and measuring head together are about the same size and format as a ballpoint pen which represents a big advantage for those needing to measure small precision parts and who need to have their gauge with them all the time.
FEATURES:
Thread Gauge: Hole Location
Baker manufactures hole location plugs as shown. These are used to measure & check the location of small tapped holes. This is a perfect gauge to inspect features for run-out to the pitch diameter of the threads.These give a firm locating grip without pulling the shoulder of the plug up against the hole face thus avoiding squareness errors.
Hole location plugs are commonly used to measure the location of tapped holes. It is difficult to accurately measure the location of tapped holes using conventional methods; i.e. CMMs or indicating type instruments. Hole location plugs are deliberately manufactured with Pitch diameter over-size, then slitted, resulting in the threaded section collapsing while being screwed in the threaded hole. The hole location plugwill screw in tightly, locating on the Pitch diameter of the tapped hole. A measurement can then be taken from the datum point to the cylindrical diameter on the hole location plugto determine location. For very small sizes, the plug is not slitted but the thread is manufactured with a gradual taper, which will lock up on the thread.
Baker has collaborated with Spline Gauges of England to bring spline plugs and rings to the Indian market.
Spline Gauges is the worlds leading manufacturer of spline gauges and master gears. Its customers include leading global companies and their suppliers in the automotive, defense and aerospace industries, their OEMs and the precision engineering companies which support them.
Go and No Go spline rings, plugs and master gears are their speciality.
Together, we also offer:
FEATURES:
FEATURES:
FEATURES:
FEATURES:
Air electronic Units are a combination of two highly reliable Systems to give combined advantages of non-contact, self-cleaning and advantage of high precision electronicsAccommodates all BAKER jet diameter of Air Plug Gauges, Air Ring Gauges & Air CalipersImproved linearityFaster responseEasy to calibrateThe slim design makes it very convenient formulti-gauging as they can be banked within a small spaceSupplied with quick connecting adaptors to suit all BAKER Air Plugs/Air Rings/Air Cali-persWith Calibration certificate
FEATURES:
FEATURES:
FEATURES:
The Baker Multiplexer is a simple measurement data transfer device. It serves as a hub for interfacing more than one Baker Digital input (from digital instruments or digital readout units) to the PC for data acquisition, storage and analysis.
FEATURES:
Note:
For diameter below 3mm, pin type and collet design are applicable.
|
Special Measuring System:
Non-standard solutions sought by customers, for purpose of measurement, control or analysis, may warrant the undertaking of special development processes to satisfy needs of such variations. Features and specifications of a sample non-standard system developed by us is shown below:-
FEATURES:
Odd pitch and diameter combination, extra fine pitch gauges also manufactured.
Variable spline indicator ring gauges are ideally suited to measuring component effective tool thickness. Spline indicators can also be supplied with two opposite sectors of teeth to measure actual tool thickness.We can supply ring gauges with analogue or digital indicators or even with transducer ports, making SPC type analysis possible on an external computer or other processing device.
MODEL 56 Plunger Dial Gauge Range 0.8mm to 30mm / 0.08" to 1", Range 0.8mm/0.08inch, One revolution dial gauge. Shock proof, Hardened stem for free clamping, Rigid brass case.
FEATURES
Auto zero setting while operating, supplied with dual scale, Used in hardness testing machine.
FEATURES
VALUE LINE DIGITAL Plunger DIAL GAUGE Range 12.5mm / 50mm READING 0.01MM/ 0.0005', Large digits, Zero setting, with 0.01/0.0005" display resolution. Preset referance, Manual/auto power off.
| Nominal Diameter Metric |
Pitch | Tolerance class Thread plug |
Tolerance class Thread ring |
|---|---|---|---|
| M1 | 0.25 mm | 5H | 6h |
| M1.1 | 0.25 mm | 5H | 6h |
| M1.2 | 0.25 mm | 5H | 6h |
| M1.4 | 0.25 mm | 5H | 6h |
| UNIFIED | |||
| 1.00 UNM | 0.25 mm | - | - |
| 1.20 UNM | 0.25 mm | - | - |
| No.0 (0.060")UNF | 80 TPI | 2B | 2A |
Please provide the following information to enable us to send a quote
NotePF, STI (Wire threads), NPSM, NPSC, NPTR, NPSH, NPSL, NPSF, NPSI, NGT, MJ, UNJF, UNJC, DIN 2999, DIN 158 are some of the other types of threads which we also manufacture.
BAKER has collaborated with KURODA PRECISION INDUSTRIES, a leading Japanese thread gauge manufacturer, to distribute their high quality API thread gauges in India. KURODA has been granted the right of use of API Official Monogram for the following API Thread Gauges since 1957; Specification 5B under the License no. 5B-0015, Specification 7-2 under the License no. 7-2-0187.
Kuroda Precision Industries: A Brief introductionKuroda was founded in 1925 as one of the first dedicated gauge manufacturers in Japan. Since then, they have developed various products based on precision measuring and processing technology. While working to preserve traditional skills, techniques and reputation for best quality, they also employ latest technologies through active R&D. Kurodas mission continues to be that of support to the customers through their high precision measuring and processing technology based on the philosophy of P&P (Precision and Productivity) and the spirit of C&C (Challenge and Create).
FEATURES:
When ordering, please provide information on:Type of gaugeSize of gaugeReference master or working gaugesPlug or ring or bothRight hand or left hand, in case of API Spec. 7-2 thread gaugesInspection results to be stated in inches or mm
Taper tooth master plugs with fit and wear lines beautifully exemplify Spline Gauges exacting specialty engineering. These are used to monitor the wear of ring gauges during component manufacture. The ring gauge is ground to fit the master plug for original and replacement ring gauges.
Range available:Min. diameter : 10mmMax. diameter : 300mmMax. tooth length of component : 300mm
Concentricity Tolerance:
Between outside diameter and spline pitch circle diameter : 0.005mm
Notes:
To use this gauge, the component under testing is mounted on centers while the concentricity ring is clamped onto it. The outside diameter of the ring is concentric to the pitch circle diameter. This means that, with the aid of a runout checking devicefor example, dial indicators or transducersthe components datum faces or diameters can be inspected.
Multi start threads are used where quick axial travel is desired with less rotation. These are also used for threads which cannot have coarse pitches due to metallurgical constraints. In comparison to single start threads, multi start threads can accept higher axial thrusts for restricted angles of rotation, the efficiency is high, the tendency to locking is reduced. Multi start threads are commonly used in power transmitting screws, valve spindles.
Variable spline indicator ring gauges are ideally suited to measuring component effective tool thickness. Spline indicators can also be supplied with two opposite sectors of teeth to measure actual tool thickness.We can supply ring gauges with analogue or digital indicators or even with transducer ports, making SPC type analysis possible on an external computer or other processing device.
