Other Products / Services #5332915

Ready mix plaster Low machinery cost ranging from 2 lacks to 50 lacks as per production capacity required. The sand is washed and cleaned before mixing, which gives maximum strength with minimum quantity of cement. No crack developments in plaster, which will avoid leakage and dampness in walls. No wastage of costly sand in sieving, which ultimately saves a lot of cost. Since it is screened for proper gradiation and washed before mixing, the best quality is assured, which will give very smooth, plaster. leveled excellent quality Due to controlled factory mix design the quality of product is consistence.

Made of 10 mm thk. MS Plate. Base Frame made of 100 X 50 MS Channels.Good Quality Vibrating Pads.Easy to Shift fron One palce to another place. No Foundation Required. Best Quality Vibrator.

Good Quality Vibrating Pads, Vibrator, Easy to Shift from One palce to another place. Mould Passing Time -40 Sec. Base Frame made of 100 X 50 MS Channels.

We supply two types of concrete mixers :

• Pan Type concrete mixer
• Planetary Type Concrete Mixer

We are Manufacturer, Exporter, Supplier of our product range and our setup is situated in Satara, Maharashtra, India. These are designed to mix concrete very well at minimum water cement ratio. It has sturdy long lasting construction. It is supported with digital water meter. So that exact quantity of water is supplied to the concrete batch. Mixing arms are made of alloy steel. Those can be replaced easily. Hard cast lining is provided all around and at bottom. Those are very much power efficient.

We are Manufacturer, Exporter, Supplier of our product range and our setup is situated in Satara, Maharashtra, India. These are technically balanced for optimum even vibration all over. The speed of mould passing on table is also adjusted to its full capacity. There are made of heavy duty components for much longer life.Since it has inbuilt foundation frame, no separate foundation is required on site. It has powerful, rigid vibrator fitted on spring steel.

Main Features :

• Made of 10 mm thick MS Plate.
• Base Frame made of 100 X 50 MS Channels.
• Good Quality Vibrating Pads, Vibrator
• Easy to Shift from One palce to another place.
• No Foundation required
• Mould Passing Time -40 Sec.
• Table Size 3ft x 10ft

We are Manufacturer, Exporter, Supplier of our product range and our setup is situated in Satara, Maharashtra, India. This is heavy duty equipment made for storage of basic raw material. Sand aggregate, Fly ash etc.
It is manufactured in following models.

• 4 bin x 10/5 Ton Cap
• 3 bin x 10/5 Ton Cap
• 2 bin x 10/5 Ton Cap

Material is stored in bins and taken out as per designed batch. Its taken on conveyor below the bins in sequence and then feed to the mixer. All process is fully automatic.

It has Following Advantages :

• Ease of material loading to mixer. Normally it is done manually which require large manpower. Also there is no precision in quantity, when taken manually.
• Since every batch is same in weight, as designed, the quality of product is consistence.
• A lot of time is saved to take each batch, which will increase the production.
• It is also supported by cement screw conveyor with batching arrangement. Cement is stored in bottom hopper and it is used as per requirement in batches. It will control the exact dosing of cement. Which is the most costly item, As well as it governs the quality of product. Silo can also be installed to save on loading cost.

Main Features :

• Heavy duty storage bins made of 5 mm ms sheet
• Pneumatic operated discharge doors.
• Two models available.
• Robust panel board including load indicating meters, with synchronizing of cement screw conveyor, water dosing system
• Printing reports.
• Auto and manual operations

Fully automatic PLC controlled machine.Hydraulic pressure-63 Tons.Single person operated. Maximum strength achieved is M-40. Fully automatic, manual or single cycle operations supported.Heavy duty robost body.

We are Manufacturer, Exporter, Supplier of our product range and our setup is situated in Satara, Maharashtra, India. We have specially designed this for through mixing of First layer. Planetary type gear box is provided for the excellent concrete mix with less water cement ratio.Since the mixer drum is not rotating we can fix auto dosing concrete conveyor to this mixer. This will increase the productivity as well as Quality of work. Easy to wash and clean for fast color change.Mixer is provided with auto weighing and digital water dosing system. This will insure the quality consistency of the final product.

Main Features :

• 8mm MS plate drum
• 3 HP planetary Gear box with motor.
• Mounted on suitable MS angle frame
• Locking arrangement etc.

Fully Automatic, PLC controlled, Hydraulic Machine
Motor	SIMENS 10 Hp
Hydrolic	Pressure 63 TonVedol 68 Oil with 300 ltr.Oil tank Yuken India ltd.Make Control valvesHeavy Robust Metal Body for long lifeNo foundation required
Operating	Fully Automatic and Manual operated No Wooden pa'llets Required
Plant	Machine
Requirements	Required MouldsMixer 400 kg 7.5Hp (1 nos)Conveyor - 6 meter with 3 Hp motorProduct strength M-40

PLC controlled, Hydraulic Fully Automatic, Vibration, Pressing, Demoulding Machine
Motor	SIMENS
Hydrolic	PressureVedol 68 Oil with 200 ltr. Oil tankYuken India ltd. Make Control valves
Operating	Fully Automatic Manual operated
System	Heavy Robust Metal Body for long lifeHigher production capacity- 600 to 800 cycle per shift.Pallet size 600 x 450 mmNo foundation requiredTotal power required for machine 10 HpProduct strength M-40

Main Features :

Extra Heavy duty shell and frameAuto Digital Water DosingLow Maintenance High PerformanceFast Effective mixingHeard Steel Blades / arms

Main Features :

8mm MS plate drum, 3 HP planetary Gear box with motor.Mounted on suitable MS angle frameLocking arrangement etc.

Main Features :

Hinge type door for easy unloading.Sheet metal covering, to avoid color wastage.Solid rigid body and drum.Useful for double color paving blocks.

We are Manufacturer, Supplier, Exporter of Four Wheel Travel Trolleys / 4 Wheel Travel Trolley and our setup is situated in Satara, Maharashtra, India.

Main Features :

Main Features :

Mould resting tablesMode of ms angels10 gauge MS sheet

Main Features :

Conveyor belt with electric motor & Worm Gear.Standard Idler rollers mounted on ms frameBelt tightening ArrangementOne Year WarranteeIdler Roller made of 100 mm x 3 mm thk. M.S. PipeStandard Pedestals etc.Revers Belt Interlocking.

Additional Features :

Heavy duty strong machine made of MS PlatesManual and fully auto operating systemsOnly one Semi skilled operated can run the productionTotal four Persons require of per shiftPolyhydran / Standard make hydraulic sparesRubber hoses and standard ms pipesOnly Uni paver blocks are producedVery Easy to RequiredNo Foundation Required

We are Manufacturer, Supplier, Exporter of Batching Type Pan Mixers PMXB and our setup is situated in Satara, Maharashtra, India.

Main Features :

3 Separate bins with load cells for different material weighing.Hydraulic skip to unload material.Auto digital water dosing.Panel board showing separate weight of each material.Auto hydraulic / pneumatic operated door.Total system PLC controlledFully auto or manual operations.Rigid and heavy duty body.Top cover with inspection windowHigh manganese wear plate from all inside, replaceable.Batch Time 2 Min.Most effective planetary gear box with SIMENS make motorsOil circulation systemsMore durable mixer

These are designed to mix concrete very well at minimum water cement ratio. It has sturdy long lasting construction. It is supported with digital water meter. So that exact quantity of water is supplied to the concrete batch. Mixing arms are made of alloy steel. Those can be replaced easily. Hard cast lining is provided all around and at bottom. Those are very much power efficient.

Light in Weight. High Thermal Insulation.High Fire Protection.High Sound Insulation.Lower Water Absorption Eco Friendly. Economical.The basic foam concrete is made from mixing aqueeous foam which is produced from generators (IFG) into Slurry of Cement, fly ash OR sand, water and other additives in a precise mixing in foam concrete mixer(IFM) for accurate mixing without disturbing its original chemical and physical properties.

we are manufacturer, exporter, supplier of our product range and our setup is situated in satara, maharashtra, india. Paver block demoulders ( demolders ) is the well designed compact equipment to remove concrete paver from rubber molds. It is the most laborious and critical operation in paver production. We have made it very easy. The other advantages are,

• a lot of saving in space, since you need not spread the pavers on ground for lacquering. Double operation of collecting the pavers is avoided.
• de molding manually is very difficult and laborious operation. All the labor fatic is removed, which will give a good production.
• it is very effective particularly in winter season.

The First advantage of Autoclaveed Aerated Concrete is designed for consumers who are environmental conscious it helps reduce at least 30% of environmental waste, decrease over 50% of greenhouse radiation and Over 60% integrated energy on the surface of brick. consumes Fly Ash, which is a big problem for thermal power Plants to dispose. it is environment friendly, because of no need of burning

Our firm is involved in rendering Tower Hoists that are offered to the clients at market leading prices. These are manufactured using fine quality raw material that is sourced from authentic vendors of the market. Further, these possess prime winches that help in the smooth functioning of the equipment. We also customize these as per clients' requirements.

Main Features :
1. Accurate screening and separation with high production yields at the same time.
2. Totally-enclosed design with unitized screen frames, easy to assemble, clean and maintain.
3. Automatic screen mesh cleaning device-bouncing balls prevent the screen surface from blinding.
4. The machine has one to three screen decks, producing up to four grades (separations).
5. Smooth operation, low noise, environmental protection