We supply two types of concrete mixers :

• Pan Type concrete mixer


• Planetary Type Concrete Mixer

We are Manufacturer, Exporter, Supplier of our product range and our setup is situated in Satara, Maharashtra, India. These are designed to mix concrete very well at minimum water cement ratio. It has sturdy long lasting construction. It is supported with digital water meter. So that exact quantity of water is supplied to the concrete batch. Mixing arms are made of alloy steel. Those can be replaced easily. Hard cast lining is provided all around and at bottom. Those are very much power efficient.

We are Manufacturer, Exporter, Supplier of our product range and our setup is situated in Satara, Maharashtra, India. These are technically balanced for optimum even vibration all over. The speed of mould passing on table is also adjusted to its full capacity. There are made of heavy duty components for much longer life.
Since it has inbuilt foundation frame, no separate foundation is required on site. It has powerful, rigid vibrator fitted on spring steel.

Main Features :

• Made of 10 mm thick MS Plate.


• Base Frame made of 100 X 50 MS Channels.


• Good Quality Vibrating Pads, Vibrator


• Easy to Shift from One palce to another place.


• No Foundation required


• Mould Passing Time -40 Sec.


• Table Size 3ft x 10ft

We are Manufacturer, Exporter, Supplier of our product range and our setup is situated in Satara, Maharashtra, India. This is heavy duty equipment made for storage of basic raw material. Sand aggregate, Fly ash etc.
It is manufactured in following models.

• 4 bin x 10/5 Ton Cap


• 3 bin x 10/5 Ton Cap


• 2 bin x 10/5 Ton Cap

Material is stored in bins and taken out as per designed batch. Its taken on conveyor below the bins in sequence and then feed to the mixer. All process is fully automatic.

It has Following Advantages :

• Ease of material loading to mixer. Normally it is done manually which require large manpower. Also there is no precision in quantity, when taken manually.


• Since every batch is same in weight, as designed, the quality of product is consistence.


• A lot of time is saved to take each batch, which will increase the production.


• It is also supported by cement screw conveyor with batching arrangement. Cement is stored in bottom hopper and it is used as per requirement in batches. It will control the exact dosing of cement. Which is the most costly item, As well as it governs the quality of product. Silo can also be installed to save on loading cost.

Main Features :

• Heavy duty storage bins made of 5 mm ms sheet


• Pneumatic operated discharge doors.


• Two models available.


• Robust panel board including load indicating meters, with synchronizing of cement screw conveyor, water dosing system


• Printing reports.


• Auto and manual operations

We are Manufacturer, Exporter, Supplier of our product range and our setup is situated in Satara, Maharashtra, India. We have specially designed this for through mixing of First layer. Planetary type gear box is provided for the excellent concrete mix with less water cement ratio.
Since the mixer drum is not rotating we can fix auto dosing concrete conveyor to this mixer. This will increase the productivity as well as Quality of work. Easy to wash and clean for fast color change.
Mixer is provided with auto weighing and digital water dosing system. This will insure the quality consistency of the final product.

Main Features :

• 8mm MS plate drum


• 3 HP planetary Gear box with motor.


• Mounted on suitable MS angle frame


• Locking arrangement etc.

We are Manufacturer, Supplier, Exporter of Four Wheel Travel Trolleys / 4 Wheel Travel Trolley and our setup is situated in Satara, Maharashtra, India.

Main Features :

We are Manufacturer, Supplier, Exporter of Batching Type Pan Mixers PMXB and our setup is situated in Satara, Maharashtra, India.

we are manufacturer, exporter, supplier of our product range and our setup is situated in satara, maharashtra, india. Paver block demoulders ( demolders ) is the well designed compact equipment to remove concrete paver from rubber molds. It is the most laborious and critical operation in paver production. We have made it very easy. The other advantages are,

• a lot of saving in space, since you need not spread the pavers on ground for lacquering. Double operation of collecting the pavers is avoided.


• de molding manually is very difficult and laborious operation. All the labor fatic is removed, which will give a good production.


• it is very effective particularly in winter season.

Our firm is involved in rendering Tower Hoists that are offered to the clients at market leading prices. These are manufactured using fine quality raw material that is sourced from authentic vendors of the market. Further, these possess prime winches that help in the smooth functioning of the equipment. We also customize these as per clients' requirements.

Main Features :
1. Accurate screening and separation with high production yields at the same time.
2. Totally-enclosed design with unitized screen frames, easy to assemble, clean and maintain.
3. Automatic screen mesh cleaning device-bouncing balls prevent the screen surface from blinding.
4. The machine has one to three screen decks, producing up to four grades (separations).
5. Smooth operation, low noise, environmental protection

We supply two types of concrete mixers :

• Pan Type concrete mixer


• Planetary Type Concrete Mixer

We are Manufacturer, Exporter, Supplier of our product range and our setup is situated in Satara, Maharashtra, India. These are designed to mix concrete very well at minimum water cement ratio. It has sturdy long lasting construction. It is supported with digital water meter. So that exact quantity of water is supplied to the concrete batch. Mixing arms are made of alloy steel. Those can be replaced easily. Hard cast lining is provided all around and at bottom. Those are very much power efficient.

We are Manufacturer, Exporter, Supplier of our product range and our setup is situated in Satara, Maharashtra, India. These are technically balanced for optimum even vibration all over. The speed of mould passing on table is also adjusted to its full capacity. There are made of heavy duty components for much longer life.
Since it has inbuilt foundation frame, no separate foundation is required on site. It has powerful, rigid vibrator fitted on spring steel.

Main Features :

• Made of 10 mm thick MS Plate.


• Base Frame made of 100 X 50 MS Channels.


• Good Quality Vibrating Pads, Vibrator


• Easy to Shift from One palce to another place.


• No Foundation required


• Mould Passing Time -40 Sec.


• Table Size 3ft x 10ft

We are Manufacturer, Exporter, Supplier of our product range and our setup is situated in Satara, Maharashtra, India. This is heavy duty equipment made for storage of basic raw material. Sand aggregate, Fly ash etc.
It is manufactured in following models.

• 4 bin x 10/5 Ton Cap


• 3 bin x 10/5 Ton Cap


• 2 bin x 10/5 Ton Cap

Material is stored in bins and taken out as per designed batch. Its taken on conveyor below the bins in sequence and then feed to the mixer. All process is fully automatic.

It has Following Advantages :

• Ease of material loading to mixer. Normally it is done manually which require large manpower. Also there is no precision in quantity, when taken manually.


• Since every batch is same in weight, as designed, the quality of product is consistence.


• A lot of time is saved to take each batch, which will increase the production.


• It is also supported by cement screw conveyor with batching arrangement. Cement is stored in bottom hopper and it is used as per requirement in batches. It will control the exact dosing of cement. Which is the most costly item, As well as it governs the quality of product. Silo can also be installed to save on loading cost.

Main Features :

• Heavy duty storage bins made of 5 mm ms sheet


• Pneumatic operated discharge doors.


• Two models available.


• Robust panel board including load indicating meters, with synchronizing of cement screw conveyor, water dosing system


• Printing reports.


• Auto and manual operations

We are Manufacturer, Exporter, Supplier of our product range and our setup is situated in Satara, Maharashtra, India. We have specially designed this for through mixing of First layer. Planetary type gear box is provided for the excellent concrete mix with less water cement ratio.
Since the mixer drum is not rotating we can fix auto dosing concrete conveyor to this mixer. This will increase the productivity as well as Quality of work. Easy to wash and clean for fast color change.
Mixer is provided with auto weighing and digital water dosing system. This will insure the quality consistency of the final product.

Main Features :

• 8mm MS plate drum


• 3 HP planetary Gear box with motor.


• Mounted on suitable MS angle frame


• Locking arrangement etc.

We are Manufacturer, Supplier, Exporter of Four Wheel Travel Trolleys / 4 Wheel Travel Trolley and our setup is situated in Satara, Maharashtra, India.

Main Features :

We are Manufacturer, Supplier, Exporter of Batching Type Pan Mixers PMXB and our setup is situated in Satara, Maharashtra, India.

we are manufacturer, exporter, supplier of our product range and our setup is situated in satara, maharashtra, india. Paver block demoulders ( demolders ) is the well designed compact equipment to remove concrete paver from rubber molds. It is the most laborious and critical operation in paver production. We have made it very easy. The other advantages are,

• a lot of saving in space, since you need not spread the pavers on ground for lacquering. Double operation of collecting the pavers is avoided.


• de molding manually is very difficult and laborious operation. All the labor fatic is removed, which will give a good production.


• it is very effective particularly in winter season.

Our firm is involved in rendering Tower Hoists that are offered to the clients at market leading prices. These are manufactured using fine quality raw material that is sourced from authentic vendors of the market. Further, these possess prime winches that help in the smooth functioning of the equipment. We also customize these as per clients' requirements.

Main Features :
1. Accurate screening and separation with high production yields at the same time.
2. Totally-enclosed design with unitized screen frames, easy to assemble, clean and maintain.
3. Automatic screen mesh cleaning device-bouncing balls prevent the screen surface from blinding.
4. The machine has one to three screen decks, producing up to four grades (separations).
5. Smooth operation, low noise, environmental protection