Our Products
The COMBIPOWER-RGSboiler is a hybrid water wall membrane panel boiler, which combines the best of both technologies-water tube and smock tube. The COMBIPOWER-RSG is specially designed to operate on biomass fuel. It is high performance and automatic reciprocating step grate furnace systems confirms to the most exacting standards of safety, performance and efficiency. This boiler is manufactured with the latest engineering techniques, modern production equipment and with the expertise of highly skilled engineers and workers. The most critical parts used inCOMBIPOWER-RSGare the best in the world by any standards.
Multi-fuel option
Rugged - requires very little maintenance
User - friendly systems.
Capacities | From 2 TPH to 10 TPH as STD offerings; from 12 to 20 TPH as Customized offerin |
Pressure: | 10.54 to 21.0 Kg/cm2 |
Firing fuels: | Low and high calorific value coal, Saw Dust, Husk, Crushed Briquette, Wood Chips |
TheCOMBIPOWERboiler with its high performance and automatic modern styling confirms to the most exacting standards of safety, performance and efficiency. This boiler is manufactured with the latest engineering techniques, modern production equipment and with the expertise of highly skilled engineers and workers. The most critical parts used inCOMBIPOWERare the best in the world by any standards.
PRODUCTS FEATURES: | - High capacity heating system - Multi-fuel option - heavy oils, light oils and gases - Rugged - requires very little maintenance - User - friendly systems. |
|
OPERATING RANGE: | ||
Capacities | From 2 TPH to 10 TPH as STD offerings; from 12 to 20 TPH as Customized offerings | |
Pressure: | 10.54 to 21.0 Kg/cm2 | |
Firing fuels: | Low and high calorific value coal, Bagasse, wood logs / wood chips, husk, biomass fuels, etc. |
STEAMJETis a packaged, three-pass smoke tube, with fully wet back boiler.STEAMJETcomes in two three series for burning light oils & gas and heavy oils. It can also be customized to a completely skid mounted unit on customer demand. When fitted with a special burner, these boilers are ideal for burning waste gases like biogas from decomposition of organic matter in distilleries.
PRODUCTS FEATURES: | - Three-pass smoke tube with fully wet back boiler - Multi-fuel option - light oils/heavy oils/gases - High efficiency of about 88% to 95% - High dryness fraction steam increases usable heat - Comes with mono-block/ dual block/steam atomized burner with world renowned Technology from UNIGAS (ITALY) - Additional option of oil pre-heater confirming to EN safety standards - Corrugated furnaces for boilers above 6 TPH capacity - Optional PLC based control panels which can be hooked to SCADA or DCS systems |
|
OPERATING RANGE: | ||
Capacities | In the range of 1.0 TPH to 15 TPH | |
Pressure: | In the range of 10.54 to 17.54 Kg/cm2 (g) | |
Firing fuels: | LDO, FO, LSHS & natural gas | |
Efficiency: | Overall efficiency of 88 % (+/-2%) on NCV |
HUSKPOWERUltra, the next generation rice husk fired boilers fromBALKRISHNA, are designed to provide low cost heating with fuel efficiency as high as 75 %. Bubbling bed combustion, gives higher residence time to facilitate to complete combustion, thus improving for efficiency.
PRODUCTS FEATURES: | - Low cost heating - Bubbling bed combustion to enhance output and efficiency. - Rice husk fired boiler. - Top Loading design to avoid nozzle failure & bulging of reversal chamber. - Special ferrules to protect smoke tubes from abrasive husk ash. - grate designed using with proper techniques to ensure proper Cooling & longer life |
|
OPERATING RANGE: | ||
Capacities | From 2 to 5 TPH | |
Pressure: | From 10.54 to 17.5 Kg/cm2 (g) | |
Firing fuels: | Rice husk and saw dust. | |
Efficiency: | Overall efficiency of 75 % (+/-2%) |
COCOPOWERis a high-efficiency packaged smoke tube boiler designed to use crushed coconut and nut shells as fuel. It can achieve an efficiency of up to 80 %.
COCOPOWERwinning edge comes from the excellence of its manufacturing standards, and stringent quality checks that go into every stage of its making.
COCOPOWERis backed by ISO 9001 certified manufacturing capabilities.
PRODUCTS FEATURES: | - Low cost heating - Bubbling bed combustion to enhance output and efficiency. - Crushed coconut fired boiler. - Provided with unique combustor to prevent fuel from falling below the grate. - Specially designed chromium grate bar to protect smoke tubes from abrasion. - Fuel feeding can be mechanized as per customer requirement. |
|
OPERATING RANGE: | ||
Capacities | In the range of 2 to 5 TPH | |
Pressure: | In the range of 10.54 to 17.5 kg/cm2 (g) | |
Firing fuels: | Rice husk |
PETMAXboiler, the next generationPETCOCKfired boilers fromBALKRISHNA, are designed to provide low cost heating with fuel efficiency as high as 76 %. Internal nozzle bed combustion, gives higher residence time to facilitate to complete combustion, thus improving for efficiency.
- Low cost heating
- Nozzle type bed combustion to enhance output and efficiency.
- Special petcock and imported fuel fired boiler.
- Top feeding design with C.I. special type of diffuser plate.
- Special ferrules to protect smoke tubes from abrasive from petcock.
Capacities | From 2 to 5 TPH |
Pressure: | From 10.54 to 17.5 Kg/cm2 (g) |
Firing fuels: | petcock and imported coal. |
Efficiency: | Overall efficiency of 76 % (+/-2%) |
ENERPOWER, the WHRB heating product range fromBALKRISHNA, can be used for a range of applications across diverse industries. Engineered for reliability, eachENERPOWERboiler is factory insulated in engine specific sizes and designs allows multiple engine exhausts to be connected to it, is user friendly and is easy to maintain.
- Reduces as well as provides greater control over energy costs
- Improved thermal efficiency: up to 80%
- Reduced capital cost requirements and overall lower system operating cost
- Provides increased protection of the environment and aids in conservation of natural Resources
- Smoke tube exhaust heat recovery boilers are available as per domestic & international Codes IBR.
- Offers series of products for generating steam/hot water
- Suitable for generator set engine fuels - gas and liquid fuel
- No extra solid or liquid fuel required.
- Special ferrules to protect smoke tubes from abrasive from petcock.
- For installation minimum space required.
TheBIOMAXboiler with its high performance modern styling confirms to the most exacting standards of safety, performance and efficiency. This boiler is manufactured with the latest engineering techniques, for burn biomass agro fuel. The most critical parts used in BIOMAX are the best in the world by any standards for biomass fuel.
The performance of BIOMAX depends not only on your own alertness and on familiarity with the boiler and its components, but on its mechanical installation, running attention, and maintenance as well. Our efficient, highly qualified specially trained service personnel are available for guidance during in installation, operation and maintenance of this boiler.
Capacities: | From 1 TPH to 10 TPH. |
Pressure: | From 10.54 to 21.0 Kg/cm2 |
Firing fuels: | baggasse, wood logs / wood chips, husk, biomass fuels, etc. |
- Using imported ceramic electric heating pipes, Zero pollution, no noise, environment friendly, Surface low load, long life and low efficiency reached 99%.
- Reducing load and load level design, steady load regulation, minimize the impact on power.
- with time and temperature control module, can be designed according to user's requirements For temperature and switch time.
- with high and low water levels, short circuit, overload, leakage, phase and voltage abnormalities Multiple protections, to ensure foolproof security home.
- with stainless steel tube of electric heating technology, high mechanical strength, heat resistance, Good chemical resistance, small size with a separate flange, easy maintenance (metal heating tube). .
Capacities | From 1 TPH to 2 TPH. |
Pressure: | From 10.54 to 21.0 Kg/cm2 |
Firing fuels: | Electrical power. |
STEAMPOWERis a two-drum water tube boiler fromBALKRISHNA. STEAMPOWERcan be used to combust a wide variety of fuels.
STEAMPOWERis most suited for applications that require uninterrupted boiler operation even on fuel which have a high fouling tendency.STEAMPOWERcan be used for generating saturated steam as well as superheated steam. Superheated steam is used for incidental power generation or cogeneration power in industries such as distilleries, paper, solvent extraction, rice, textiles, etc.
STEAMPOWER is available in different combustion systems depending on the fuel.
PRODUCTS FEATURES: | - High capacity heating system -Available in different combinations - FBC, Dumping Grate/Pulsating grate, Travelling Grate, - Pulsating Grate - Multi-fuel option - coal/lignite/wood/agro-based fuels/biogas |
|
OPERATING RANGE: | ||
Capacities | 6 TPH to 30 TPH | |
Pressure: | Maximum pressure of 45.0 Kg/cm2 (g) | |
Temperature: | Up to 450°C | |
Firing fuels: | Indian & imported coal, lignite, wood, paddy husk, groundnut shells, coffee husk, bagasse, biogas, etc. |
This kind of boiler adopts the structure of double longitudinal drums and D-type furnace. Water tube design, the economizer and other auxiliary heating surface are fixed in the rear. The combustor is located on the front wall. The convection tube bank and rear heating surface from the back of the furnace, and then into air through the chimney.
For the double drums longitudinal D-type boiler, the pressure body has a good state of stress. Drums and other important pressure parts won't be radiated and eroded by high temperature flame. Pressure parts, with small thermal stress, can stretch out and draw back freely, and can reach higher safety margin.
Auto protect, long-distance control, safety operation
PRODUCTS FEATURES: | - High capacity heating system -Available in different combinations - FBC, Dumping Grate/Pulsating grate, Travelling Grate, - Pulsating Grate - Multi-fuel option - coal/lignite/wood/agro-based fuels/biogas |
|
OPERATING RANGE: | ||
Capacities | 6 TPH to 40 TPH | |
Pressure: | Maximum pressure of 45.0 Kg/cm2 (g) | |
Temperature: | Up to 450°C | |
Firing fuels: | Automatic Oil (Gas) Fired Steam Boiler. |
The radioactive energy from the sun that keeps our planet warm exceeds by far the current primary energy supply used by mankind for its comfort, leisure and economic activities. Indeed, the prospects of climate change and, eventually, fossil fuel depletion, trigger a growing interest in renewable energies in general, solar energy in particular. Solar parabolic concentrators generate hot water at temperature as high as 140oC and saturated steam at 3-4 bar pressure.Application:
BALKRISHNA'Score strengths in heating can offer single point optimized solution to meet total requirements with turnkey execution for various applications.
The BIOMAXboiler with its high performance modern styling confirms to the most exacting standards of safety, performance and efficiency. This boiler is manufactured with the latest engineering techniques, for burn biomass agro fuel. The most critical parts used in BIOMAX are the best in the world by any standards for biomass fuel.
The performance ofBIOMAXdepends not only on your own alertness and on familiarity with the boiler and its components, but on its mechanical installation, running attention, and maintenance as well. Our efficient, highly qualified specially trained service personnel are available for guidance during in installation, operation and maintenance of this boiler.
Capacities | From 1 to 10 TPH |
Pressure: | From 10.54 to 21.0 Kg/cm2 |
Firing fuels: | baggasse, wood logs / wood chips, husk, biomass fuels, etc. |
TheAQUAJET> series, horizontal three pass fully wet back packaged type hot water boilers designed for maximum efficiency using a variety of liquid and gaseous fuels. It is designed with fuel flexibility in mind and can fire a range of heavy oils, light oils and gases. It allows low process temperatures without operating pressures. But also you can use this unit with pressurized hot water boilers.
FEATURES
- High capacity heating system
- Multi-fuel option - heavy oils, light oils and gases
- Rugged - requires very little maintenance
- User - friendly systems.
TheAQUAJETseries, horizontal three pass coil type packaged hot water boilers designed for maximum efficiency using a variety of liquid and gaseous fuels. It is designed with fuel flexibility in mind and can fire a range of heavy oils, light oils and gases. It allows low process temperatures without operating pressures. But also you can use this unit with pressurized hot water boilers.
FEATURES
- High capacity heating system
- Multi-fuel option - heavy oils, light oils and gases
- Rugged - requires very little maintenance
- User - friendly systems.
TheFBC-series, vertical four pass solids fuel fired thermic fluid/thermal oil heater is designed for maximum efficiency, using a variety of solid fuels including agro-waste fuels. It allows high process temperatures at low operating pressures.
The combustion system for solid fuels consists of fuel handling and stoking equipment, refractory lined chamber, air and flue gas handling system (including I.D. fan and F.D. fan) with blowers and pollution control equipment. The furnace construction is done on site (only for bricks works). It includes foundation, fabrication and erection of supporting structure, building up refractory chambers, fixing up firing doors, ash doors, access doors, support bars for fire grates, grate bars, etc.
FEATURES
- For fuel such as coal, wood, brickets, baggasse, etc.- Option of grate/inclined perforated grate/flat grate, etc.- Easy operation in different type of solid fuel with maximum efficiency. |
TheCOMBIPOWERhot water boiler with its high performance For Cfbc Boiler, Vertical Boiler, Hot Air Generator automatic modern FBC fuel feeding styling confirms to the most exacting standards of safety, performance and efficiency. This hot water boiler is manufactured with the latest engineering techniques, modern production equipment and with the expertise of highly skilled engineers and workers.We are For Cfbc Boiler, Vertical Boiler, Hot Air Generator.
The performance of COMBIAQUA depends not only on your own alertness and on familiarity with the HWB and its components, but on its mechanical installation, running attention, and maintenance as well. Our efficient, highly qualified specially trained service personnel are available for guidance during in installation, operation and maintenance of this hot water boiler.The best Cfbc Boiler, Vertical Boiler, Hot Air Generator.
- High capacity heating system
- Multi-fuel option - heavy oils, light oils and gases
- Rugged - requires very little maintenance
- User - friendly systems.
Temperature: | Up to 90°C without pressure and with pressure up to 160 °C |
Capacities | From 0.1 million kcal/hr to 2.0 million kcal/hr |
Firing fuels: | Heavy oils, light oils and gases |
Efficiency: | Overall efficiency of 85 % (+/-2%) on NCV |
industrial reverse osmosis systemis a process of water filtration which works under high pressure, using special membranes to remove suspended, dissolved, bacterial and chemical impurities from water. Our Industrial RO system removes all the toxic chemicals, germs and salts to provide a safe and contamination free water. Reverse osmosis system uses semi permeable membrane which allows only pure solvent to pass through it while the solute (i.e. dissolved material) retains on other side and finally get rejected.
Membrane Technology
The membrane technology used in reverse osmosis system is based on the process of forcing a solvent from a region of high solute concentration through a membrane to a region of low solute concentration by applying a pressure in excess of the osmotic pressure. This is the reverse of the normal osmosis process, which is the natural movement of solvent from an area of low solute concentration, through a membrane, to an area of high solute concentration when no external pressure is applied. The membrane here is semi permeable, meaning it allows the passage of solvent but not of solute (dissolved salt ions).
These semi permeable membranes removes all the dissolved impurities in water up to 0.0001 micron (1 micron = 1/1000 mm) which helps to meet the most demanding
TheCOMBIPOWERboiler with its high performance and automatic modern styling confirms to the most exacting standards of safety, performance and efficiency. This boiler is manufactured with the latest engineering techniques, modern production equipment and with the expertise of highly skilled engineers and workers. The most critical parts used inCOMBIPOWERare the best in the world by any standards.
- High capacity heating system
- Multi-fuel option - heavy oils, light oils and gases
- Rugged - requires very little maintenance
- User - friendly systems.
Capacities | From 2 TPH to 10 TPH as STD offerings; from 12 to 20 TPH as Customized offerings |
Pressure: | 10.54 to 21.0 Kg/cm2 |
Firing fuels: | Low and high calorific value coal, Bagasse, wood logs / wood chips, husk, biomass fuels, etc. |
STEAMJETis a packaged, three-pass smoke tube, with fully wet back boiler.STEAMJETcomes in two three series for burning light oils & gas and heavy oils. It can also be customized to a completely skid mounted unit on customer demand. When fitted with a special burner, these boilers are ideal for burning waste gases like biogas from decomposition of organic matter in distilleries.
- Three-pass smoke tube with fully wet back boiler
- Multi-fuel option - light oils/heavy oils/gases
- High efficiency of about 88% to 95%
- High dryness fraction steam increases usable heat
- Comes with mono-block/ dual block/steam atomized burner with world renowned Technology fromUNIGAS (ITALY)
- Additional option of oil pre-heater confirming to EN safety standards
- Corrugated furnaces for boilers above 6 TPH capacity
- Optional PLC based control panels which can be hooked to SCADA or DCS systems
Capacities | In the range of 1.0 TPH to 15 TPH |
Pressure: | In the range of 10.54 to 17.54 Kg/cm2 (g) |
Firing fuels: | LDO, FO, LSHS & natural gas |
Efficiency: | Overall efficiency of 88 % (+/-2%) on NCV |
COCOPOWERis a high-efficiency packaged smoke tube boiler designed to use crushed coconut and nut shells as fuel. It can achieve an efficiency of up to 80 %.
COCOPOWERwinning edge comes from the excellence of its manufacturing standards, and stringent quality checks that go into every stage of its making.
COCOPOWERis backed by ISO 9001 certified manufacturing capabilities.
- Low cost heating
- Bubbling bed combustion to enhance output and efficiency.
- Crushed coconut fired boiler.
- Provided with unique combustor to prevent fuel from falling below the grate.
- Specially designed chromium grate bar to protect smoke tubes from abrasion.
- Fuel feeding can be mechanized as per customer requirement.
Capacities | In the range of 2 to 5 TPH |
Pressure: | In the range of 10.54 to 17.5 kg/cm2 (g) |
Firing fuels: | Rice husk |
Efficiency: | Overall efficiency of 81 % (+/-2%) |
HUSKPOWERUltra, the next generation rice husk fired boilers fromBALKRISHNA, are designed to provide low cost heating with fuel efficiency as high as 75 %. Bubbling bed combustion, gives higher residence time to facilitate to complete combustion, thus improving for efficiency.
- Low cost heating
- Bubbling bed combustion to enhance output and efficiency.
- Rice husk fired boiler.
- Top Loading design to avoid nozzle failure & bulging of reversal chamber.
- Special ferrules to protect smoke tubes from abrasive husk ash.
- grate designed using with proper techniques to ensure proper Cooling & longer life
Capacities | From 2 to 5 TPH |
Pressure: | From 10.54 to 17.5 Kg/cm2 (g) |
Firing fuels: | Rice husk and saw dust. |
Efficiency: | Overall efficiency of 75 % (+/-2%) |
STEAMPOWERis a two-drum water tube boiler fromBALKRISHNA. STEAMPOWERcan be used to combust a wide variety of fuels.
STEAMPOWERis most suited for applications that require uninterrupted boiler operation even on fuel which have a high fouling tendency.STEAMPOWERcan be used for generating saturated steam as well as superheated steam. Superheated steam is used for incidental power generation or cogeneration power in industries such as distilleries, paper, solvent extraction, rice, textiles, etc.
STEAMPOWER is available in different combustion systems depending on the fuel.
- High capacity heating system-Available in different combinations - FBC, Dumping Grate/Pulsating grate, Travelling Grate, - Pulsating Grate- Multi-fuel option - coal/lignite/wood/agro-based fuels/biogas
Capacities | 6 TPH to 30 TPH |
Pressure: | Maximum pressure of 45.0 Kg/cm2 (g) |
Temperature: | Up to 450°C |
Firing fuels: | Indian & imported coal, lignite, wood, paddy husk, groundnut shells, coffee husk, bagasse, biogas, etc. |
This kind of boiler adopts the structure of double longitudinal drums and D-type furnace. Water tube design, the economizer and other auxiliary heating surface are fixed in the rear. The combustor is located on the front wall. The convection tube bank and rear heating surface from the back of the furnace, and then into air through the chimney.
For the double drums longitudinal D-type boiler, the pressure body has a good state of stress. Drums and other important pressure parts won't be radiated and eroded by high temperature flame. Pressure parts, with small thermal stress, can stretch out and draw back freely, and can reach higher safety margin.
- High capacity heating system
-Available in different combinations - FBC, Dumping Grate/Pulsating grate, Travelling Grate,
- Pulsating Grate
- Multi-fuel option - coal/lignite/wood/agro-based fuels/biogas
Capacities | 6 TPH to 40 TPH |
Pressure: | Maximum pressure of 45.0 Kg/cm2 (g) |
Temperature: | Up to 450°C |
Firing fuels: | Automatic Oil (Gas) Fired Steam Boiler. |
TheAQUAJET> series, horizontal three pass fully wet back packaged type hot water boilers designed for maximum efficiency using a variety of liquid and gaseous fuels. It is designed with fuel flexibility in mind and can fire a range of heavy oils, light oils and gases. It allows low process temperatures without operating pressures. But also you can use this unit with pressurized hot water boilers.
- High capacity heating system- Multi-fuel option - heavy oils, light oils and gases- Rugged - requires very little maintenance- User - friendly systems. |
Temperature: | Up to 90°C without pressure and with pressure up to 160 °C |
Capacities | From 0.1 million kcal/hr to 2.0 million kcal/hr |
Firing fuels: | Heavy oils, light oils and gases |
Efficiency: | Overall efficiency of 85 % (+/-2%) on NCV |
TheAQUAJETseries, horizontal three pass coil type packaged hot water boilers designed for maximum efficiency using a variety of liquid and gaseous fuels. It is designed with fuel flexibility in mind and can fire a range of heavy oils, light oils and gases. It allows low process temperatures without operating pressures. But also you can use this unit with pressurized hot water boilers.
- High capacity heating system- Multi-fuel option - heavy oils, light oils and gases- Rugged - requires very little maintenance- User - friendly systems. |
Temperature: | Up to 90°C without pressure and with pressure up to 160 °C |
Capacities | From 0.1 million kcal/hr to 2.0 million kcal/hr |
Firing fuels: | Heavy oils, light oils and gases |
Efficiency: | Overall efficiency of 85 % (+/-2%) on NCV |
TheFBC-series, vertical four pass solids fuel fired thermic fluid/thermal oil heater is designed for maximum efficiency, using a variety of solid fuels including agro-waste fuels. It allows high process temperatures at low operating pressures.
The combustion system for solid fuels consists of fuel handling and stoking equipment, refractory lined chamber, air and flue gas handling system (including I.D. fan and F.D. fan) with blowers and pollution control equipment. The furnace construction is done on site (only for bricks works). It includes foundation, fabrication and erection of supporting structure, building up refractory chambers, fixing up firing doors, ash doors, access doors, support bars for fire grates, grate bars, etc.
- For fuel such as coal, wood, brickets, baggasse, etc.
- Option of grate/inclined perforated grate/flat grate, etc.
- Easy operation in different type of solid fuel with maximum efficiency.
Capacities | From 0.4 to 10.0 million kcal/hr |
Firing fuels: | Solid fuels/agro-fuels |
Efficiency: | Overall efficiency of 76 % (+/-2%) on NCV with APH. |
The VFHB-F-series, vertical four pass F.B.C fired hot water boiler For Vertical Boiler, Electrostatic Precipitator, Esp Manufacturers, Indian Boilers designed for maximum efficiency, using a variety of free flow fuels including agro-waste fuels and pulverized coal. It allows required process temperatures at required operating pressures.We are For Vertical Boiler, Electrostatic Precipitator, Esp Manufacturers, Indian Boilers.
The combustion system for free flow fuels consists of fuel feeding threw screw feeder handling and stoking equipment, in refractory lined chamber, air and flue gas handling system (including I.D. fan and F.D. fan) with blowers and pollution control equipment. The furnace construction is done on site (only for bricks works)For Vertical Boiler, Electrostatic Precipitator, Esp Manufacturers, Indian Boilers. It includes foundation, fabrication and erection of supporting structure, building up refractory chambers, fixing up firing doors, ash doors, access doors, air plenum chamber and air nozzle.
- For fuel such as pulverized coal, rice husk , sawdust, petcock,
- Option of grate/fluidization bad or suspending burning bad.
- Easy operation in different type of free flow fuel with maximum efficiency.
Capacities | From 0.4 to 10.0 million kcal/hr |
Temperature | Up to 90°C without pressure and with pressure up to 160 °C |
Firing fuels: | pulverized coal ,rice husk, sawdust, petcock |
Efficiency: | Overall efficiency of 80 % (+/-2%) on NCV with APH. |
- This is two pass dry back smock tube type horizontal and vertical steam boilers.
-Compact Skid mounted Pre-wired Pre-insulated unit:Compared to conventional boilers occupies very low foot print area
-Advantage in S-IBR range:Relaxed norms. Eliminates need for certified boiler operators.
-Compatible to condensate recovery:Accepts 100% condensate ensuring optimizing energy Utilization and Innovative steam separation mechanism. Simple and inexpensive to install.
Capacities | 100 kg/hr to 500 kg/hr. |
Pressure: | 7.00 kg/cm2 |
Firing fuels: | coal/wood/gas/oil/Ele.power. |
Many technological processes, primarily in the food industry, need to use high temperatures. High temperatures are usually obtained using Thermic fluid heaters. However, some regulation do not allow the use of Thermic fluid heater where is danger to contaminate food in process. In these cases it is a required to use high pressure steam, up to 1600 PSI, to achieve temp. up to 600 * F. We have studied and produce our steam generator NCS-HP that, working with closed circuit and with natural circulation) no pump is needed) can produce steam up to 110 kg/cm.
Capacities | 2 Lac kcal/hr to 20 Lac kcal/hr |
Pressure: | Maximum pressure of 110 Kg/cm2 (g) |
Temperature: | Up to 310°C |
Firing fuels: | Automatic Oil (Gas) Fired Steam Boiler. |