Write a Review
Our Products
We offer a complete product range of Hot Oil Fired Multi Pass Steam Generator, Indirect Fired Three Pass Shell Type Hot Air Generator, Direct Fired Hot Air Generator, Solid Fuel Fired Hot Air Generator and Fuel Fired Hot Air Generator
STEAMGENboiler, the next generation hot oil fired boilers fromBALKRISHNA, are designed to provide low cost heating with minimum space required. No special fuel required. It is run with Your Existing Thermic fluid spare heat.
| - Low cost heating- Easy for maintenance and operation.- Special hot oil fired design.- No extra solid or liquid fuel required.- Special ferrules to protect smoke tubes from abrasive from petcock.- For installation minimum space required. |
| Capacities | From 1 to 5 TPH |
| Pressure: | From 10.54 to 14.00 Kg/cm2 (g) |
| Firing fuels: | hot oil circulation required. |
TheAIRJETseries, horizontal three pass indirect fired shell and shell type hot air generator designed for maximum efficiency using a variety of liquid and gaseous fuels. It is designed with fuel flexibility in mind and can fire a range of heavy oils, light oils and gases. It allows high and low process temperatures without operating pressures. Also you can use this type of HAG without steam boilers and Thermal fluid heater.
| -High capacity heating system-Multi-fuel option heavy oils, light oils and gases-Rugged - requires very little maintenance-User-friendly systems. |
| Capacities | From 0.1 million kcal/hr to 2.0 million kcal/hr |
| Temperature: | up to 300 ºC |
| Firing fuels: | Heavy oils, light oils and gases |
| Efficiency: | Overall efficiency of 85 % (+/-2%) on NCV |
TheAIRPOWERseries, horizontal single pass direct fired shell and shell type hot gas generator designed for maximum efficiency using a variety of liquid and gaseous fuels. It is designed with fuel flexibility in mind and can fire a range of heavy oils, light oils and gases. It allows high and medium process temperatures without operating pressures
| - High capacity heating system- Multi-fuel option heavy oils, light oils and gases- Rugged - requires very little maintenance- User-friendly systems. |
| Capacities | From 0.1 million kcal/hr to 10.0 million kcal/hr |
| Temperature: | up to 500 ºC |
| Firing fuels: | Heavy oils, light oils and gases |
| Efficiency: | Overall efficiency of 98 % (+/-2%) on NCV |
TheAIRMAXseries, horizontal four pass indirect fired shell and tube type hot air generator designed for maximum efficiency using a variety of solids fuels. It is designed with fuel flexibility in mind and can fire a range of use wood, coal, any type solid fuel. It allows low and medium process temperatures without operating pressures.
FEATURES
- High capacity heating system
- Multi-fuel option wood, coal, brickets, any type solid fuel.
- Rugged - requires very little maintenance
- User-friendly systems.
TheAIRPACKseries, horizontal four pass indirect fired shell and tube type FBC hot air generator is designed with fuel flexibility in mind and can fire a range of use saw dust, rice husk, pulverizes coal, and any type of free flow fuel. It allows low and medium process temperatures without operating pressures. Fuel feeding systems is automatic threw screw feeders with A.C drive controlling.
FEATURES
- High capacity heating system
- Multi-fuel option saw dust, rice husk, pulverizes coal, any type of free flow fuel
- Rugged - requires very little maintenance
- User-friendly systems.
TheAIRTHERMseries, horizontal three pass indirect fired shell and tube type hot air generator designed for maximum efficiency using a variety of liquid and gaseous fuels. It is designed with fuel flexibility in mind and can fire a range of heavy oils, light oils and gases. It allows low process temperatures without operating pressures. Also you can use this type of HAG without steam boilers and Thermal fluid heater.
- High Multi-fuel option heavy oils, light oils and gases
- Rugged - requires very little maintenance
- User-friendly systems.
- capacity heating system
| Capacities | From 0.1 million kcal/hr to 0.4 million kcal/hr |
| Temperature: | up to 200 °C |
| Firing fuels: | Heavy oils, light oils and gases |
| Efficiency: | Overall efficiency of 85 % (+/-2%) on NCV |
TheAIRMAXseries, horizontal four pass indirect fired shell and tube type hot air generator designed for maximum efficiency using a variety of solids fuels. It is designed with fuel flexibility in mind and can fire a range of use wood, coal, any type solid fuel. It allows low and medium process temperatures without operating pressures.
| - High capacity heating system- Multi-fuel option wood, coal, brickets, any type solid fuel.- Rugged - requires very little maintenance- User-friendly systems. |
| Capacities | From 0.1 million kcal/hr to 0.6 million kcal/hr |
| Temperature: | up to 200 ºC |
| Firing fuels: | wood, coal, brickets, any type solid fuel. |
| Efficiency: | Overall efficiency of 76 % (+/-2%) on NCV |
TheAIRPACKseries, horizontal four pass indirect fired shell and tube type FBC hot air generator is designed with fuel flexibility in mind and can fire a range of use saw dust, rice husk, pulverizes coal, and any type of free flow fuel. It allows low and medium process temperatures without operating pressures. Fuel feeding systems is automatic threw screw feeders with A.C drive controlling.
- High capacity heating system
- Multi-fuel option saw dust, rice husk, pulverizes coal, any type of free flow fuel
- Rugged - requires very little maintenance
- User-friendly systems.
| Capacities | From 0.4 million kcal/hr to 5.0 million kcal/hr |
| Temperature: | up to 300 ºC |
| Firing fuels: | saw dust, rice husk, pulverizes coal, and any type of free flow fuel |
| Efficiency: | Overall efficiency of 76 % (+/-2%) on NCV |
TheAIRPACKseries, horizontal multi pass direct fired FBC hot gas generator is designed with fuel flexibility in mind and can fire a range of use saw dust, rice husk, pulverizes coal, and any type of free flow fuel. It allows high and medium process temperatures without operating pressures. Fuel feeding systems is automatic threw screw feeders with A.C drive controlling.
- High capacity heating system
- Multi-fuel option saw dust, rice husk, pulverizes coal, any type of free flow fuel
- Rugged - requires very little maintenance
- User-friendly systems.
| Capacities | From 0.4 million kcal/hr to 10.0 million kcal/hr |
| Temperature: | up to 400 ºC |
| Firing fuels: | saw dust, rice husk, pulverizes coal, and any type of free flow fuel |
| Efficiency: | Overall efficiency of 95 % (+/-2%) on NCV |
Mr. Paresh Patel (Balkrishna Boilers Pvt. Ltd.)
78/8, Phase-i, Opp. Aabad Bread, G.i.d.c., Vatva, Ahmedabad, Gujarat - 382445, India
Share us via
