BAMO ELECTRONICS

Kothrud, Pune, Maharashtra

This is the most modern and versatile concept of wireless remote measurement of water level/Pressure/Flow Rate etc. The unit has got one analogue input to measure any one of the above parameters. This unit is designed and developed for sensors having 4 to 20 mA output. Unit measures selected parameter at selected interval of time throughout 24 hours and accordingly sends SMS to pre selected GSM mobile phones. The unit has got low alarm setting and in case of alarm generated, the same can be informed on pre desired cell phone. The enclosure is wall-mounting type with provision of high gain antenna suitable for GSM dual band. In case of power failure unit has provision of suitable battery back up.

This is the most modern and versatile concept of wireless remote measurement of water levelPressureFlow Rate etc. The unit has got one analogue input to measure any one of the above parameters. This unit is designed and developed for sensors having 4 to 20 mA output. Unit measures selected parameter at selected interval of time throughout 24 hours and accordingly sends SMS to pre selected GSM mobile phones. The unit has got low alarm setting and in case of alarm generated, the same can be informed on pre desired cell phone. The enclosure is wall-mounting type with provision of high gain antenna suitable for GSM dual band. In case of power failure unit has provision of suitable battery back up.

The Field Data Transmitters should include a highly-sensitive circuitary of measuring Flow/level/Pressure sensor output which is in the form of current (here typically it will be 4 to 20 mA) or pulses particularly with flow sensors that can be periodically detected corresponding to a particular water fixture. The system should also include a set of instructions for relaying water data as and when required by user and should communicate water data after preset period to the server computer that can collect, store, and analyze data. It is also possible to log water data over website for set scan time. Field Data Transmitters should have setting of scanning time from 1 Hr. to 24 Hrs. and should be user friendly. Field Data Transmitter should have back up supply in the form of rechargeable battery to provide water data readings over to website even in power failure. FDT works over GPRS network of suitable strngth.