Connectors PSTN Line : The PSTN line is the PIJF cable with 0.5 copper pairs.
Longitudinal balance of POTS splitter : The balance is greater than 58 dB for frequency between 200 Hz - 1 kHz with a straight line-level decreasing to 53 dB at 3 kHz.
Unbalance about earth : : 25Hz-50 Hz > 40 db terminated with 600hms.50Hz- 600 Hz > 46 db terminated with 600 Ohms.600Hz-3400Hz > 52db terminated with 600ohms.
ADSL-band Return Loss : The return loss caused by loading the low-pass filter in the band from 25 kHz to 1104 kHz against the reference impedance of 100 ohms is greater than 14dB.
Return loss : The return loss of Tele port and line port against 600 Ohms is 200Hz -3400Hz = 12 dB
Longitudinal balance : The longitudinal balance at ATU-C and ATU-R is greater than 40 dB over the 5 kHz to 1104 kHz frequency range.•DC characteristics
Insertion Loss : The tele-port to Line port insertion loss is < 1 db at 1 KHz for 600 Ohms.
Delay distortion : The delay distortion caused by POTS splitter is as follows:From 0.6 -3.2 kHz delay distortion is 200 microseconds.From 0.2 - 4.0kHz delays distortion is 250 microseconds.
ADSL-band attenuation : The insertion loss of low-pass filter is greater than 65dB at CO POTS and 70dB in remote POTS for frequencies ranging from 25 to 300 KHz with an input level of 10dBm. For frequencies ranging from 300 kHz to 1104 kHz, the attenuation is greater than 55dB f
Signal Power : Maximum peak signal power in 200-4000Hz is <3dbm. Loop current is <63mA.
Aeon Telectronics Pvt Ltd as part of its ongoing expansion has developed and added the Splitter to it product portfolio. A Splitter is a small device, which is used in the broadband network along with DSL modem at the customer premisesThe Splitter...
The organization is managed by Technocrats with many years of R&D experience in the above fields. Dedicated Teams of engineers in each of the above fields have already brought out number of products which are approved by various Government agencies....
Essential power transmission Worm wheels of A04 gear reducers and gearmotors made of nickel bronze with controlled phosphor content, in order to achieve improved performance from 6 to 18%, a higher load capacity, greater reliability and more wear...