Laser Die Tech also makes Flat Cutting dies.
High precision laser cutting, automatic rule bending and CNC cut ejection rubber with German Technology, offering advantages of accuracy prompt delivery and low cost production.
When rubbering the cutting dies it should be ensured that appropriate special rubber profiles of high quality are used. Ejection rubbers fulfil several function in the die cutting process, therefore a variety of profiles and materials of various grades of hardness are used. The ejection rubbers have the function to press the cut material after the cutting process out of the cutting rule. On modern automatic die cutting machinery this means compression and spring-back resilience every 0.3 seconds. Also, during the cutting process, ejection rubber have to fix the material in the area of the cutting rule and finally these ejection rubbers serve to support the nicks, in order to thus guarantee that the sheets are transported in the machine without any problems.

Rotary die and tooling are composed of rotary die-cutting, embossing and creasing stations for various Gravure printing/pressing machine models, reliable and mature technology.

Embossing Blocks Dies with metal block. These block is made in 2 parts Male and Female. Male part pasted in the Die it's a Metal Block and Male part is Nylon Rubber Block. It will be pasted in the chase area of the Machine. The dies works with pressure stamped onto the product, to leave a lasting impression of your design. This dies Works in single impression Cutting, Creasing & Emboss the specified area
Material Used : Superior quality Metal Blocks. Japanese Made Photo Polymer for Long Lasting Results.Leaf Printing Blocks made by Zinc/Magnesium/Brass metal blocking die or plate is produced from the film. It's a Hot observed Block. The block has been etched/milled so that the image is raised and your message appears the 'wrong' way round. It is placed in the blocking machine and is heated. Your product is below, held in a jig. Between the two is a 'foil' running from one reel to another. There are two parts to the foil, a carrier film and the foil itself. When the hot block is put, under pressure, against the product with the foil in between, the part of the block in contact with the product is the raised part on which your image appears. The result of this process is that the foil attaches itself to the product in the form of your image, and the carrier film is moved on to bring new foil ready for the next product.

High speed ejection rubber material enables the best results in cutting quality, increases the life of the die and saves the make ready time. It also results in getting the dust free and angle hair cutting. Profile cut rubber is not only fastest but also maintains the perfect pressure between the cutting rule and the cutting plate.

Two stripping ways : Dynamic stripping without lower stripping pins, stripping with lower stripping pins. Customized lower stripping tools with pins for last fast installation and effective waste removal, diversified craftsmanship and material options.

We are the leading manufacturers, exporters and supplier of this products.

The company holds specialization in manufacturing, supplying and exporting the best quality Blister Dies. Blister Dies are widely used in commercial heating presses. Blister Dies are also called as Blister Trays that are made under highly controlled industrial environment. Besides, we are associated with a vast distribution unit which ensures easy, quick and timely delivery of Blister Dies. Highlights

• Quality plywood or aluminum frame used
• Having thermoform shape for giving proper alignment relative to the backing material
• Best quality
• Affordable price range

The company is rated amongst the leading Manufacturers, Suppliers and Exporters of Flatbed Dies. Flatbed Dies offers the cost effective solution to die cut or laser cut the less complex part designs. We manufacture these Flatbed Dies keeping in mind the advanced technology. Besides, our dedicated team of quality auditors performs various tests on Flatbed Dies before the final delivery. Besides, clients are free to place bulk orders of Flatbed Dies as per their requirement. Construction

• Parts are manufactured in a reciprocating die cut press using a steel rule die that is bent to form the desired part.
• A synthetic board holds the steel rule in place.
• The board is laser cut to ensure accuracy

We provide Sticker Cutting Dies that are used for cutting to a special shape, like flowers, stars, circle, sun, moon, kids favorite cartoon characters shapes, etc. A special tool, which is made from a block of wood and steel rule, is used for Sticker Cutting Dies. This Sticker Cutting Die is developed according to the printed sheet, offered by the clients. Also, the clients can put many shapes and sizes in single Sticker Cutting Die. This Sticker Cutting Die is called a Computerized Laser Sticker Cutting Dies Tool. The Sticker Cutting Die Tool is setup with the same layout as the previously printed sheets of stickers. Great care is taken to make sure the steel rules are aligned properly within the Sticker Cutting Dies. Highlights

• Easy to work with
• Long-life
• Sturdy make
• Available in diverse shapes and designs

The Laser Cutting Dies, which we offer, are manufactured in confirmation to the set industrial norms and standards. We are rated among the dependable Manufacturers, Exporters and Suppliers of Laser Cutting Dies. Furthermore, these Laser Cutting Dies can be purchased from us at competitive rates. Why Our Laser Cutting Dies?

• Sturdy make
• Long-life
• Dimensional accuracy
• Pocket-friendly

The Alphabet Cutting Dies, which we offer, are developed according to the printed sheets and shapes provided by the clients. A special tool is made from a black of wood and steel rule that is known as the Alphabet Cutting Die. We are a credible Manufacturer, Exporter and Supplier of Alphabet Cutting Dies. Highlights

• Its 99.9% accurate
• Sturdy make
• Long-life
• Easy to work with

Developed as per the specifications of rubber sheets and shapes given by the clients, these Rubber Cutting Dies are priced at competitive rates. We are rated among the trustworthy Manufacturers, Exporters and Suppliers of Rubber Cutting Dies. Also, we can cater to the bulk requirements of the clients. Highlights

• Use of quality rubber sheets
• Simple to work with
• Customized solutions available
• Highly durable

The Flatbed Cutting Dies, which we offer, are based on the M-Power cutting rule, supplemented by the advanced tool technology with special rule processing. This Flatbed Cutting Die is capable of absorbing for greater pressure than conventional rules. We are among the respected Manufacturers, Exporters and Suppliers of Flatbed Cutting Dies. The Flatbed Cutting Dies are ideally used for smaller production volumes and for less complicated parts. This Flatbed Cutting Die is an efficient and cost-effective method, ensuring low cost and quick turnaround tooling time. With rich experience are deep die-cutting knowledge, we are in position to offer the best Flatbed Cutting Dies for making complex parts. Capabilities

• 0.05 tolerance for dimensions below 10mm and 0.5mm for dimensions above
• Maximum cutting width 315mm
• Maximum cutting length 240mm
• Minimum wall thickness 0.4 mm
• Material to be used in Making of dies
• Imported quality 6, 8, 12 mm imported MDF board
• Imported quality cutting rules

Laser Die Tech also makes Flat Cutting dies.
High precision laser cutting, automatic rule bending and CNC cut ejection rubber with German Technology, offering advantages of accuracy prompt delivery and low cost production.
When rubbering the cutting dies it should be ensured that appropriate special rubber profiles of high quality are used. Ejection rubbers fulfil several function in the die cutting process, therefore a variety of profiles and materials of various grades of hardness are used. The ejection rubbers have the function to press the cut material after the cutting process out of the cutting rule. On modern automatic die cutting machinery this means compression and spring-back resilience every 0.3 seconds. Also, during the cutting process, ejection rubber have to fix the material in the area of the cutting rule and finally these ejection rubbers serve to support the nicks, in order to thus guarantee that the sheets are transported in the machine without any problems.

Rotary die and tooling are composed of rotary die-cutting, embossing and creasing stations for various Gravure printing/pressing machine models, reliable and mature technology.

Embossing Blocks Dies with metal block. These block is made in 2 parts Male and Female. Male part pasted in the Die it's a Metal Block and Male part is Nylon Rubber Block. It will be pasted in the chase area of the Machine. The dies works with pressure stamped onto the product, to leave a lasting impression of your design. This dies Works in single impression Cutting, Creasing & Emboss the specified area
Material Used : Superior quality Metal Blocks. Japanese Made Photo Polymer for Long Lasting Results.Leaf Printing Blocks made by Zinc/Magnesium/Brass metal blocking die or plate is produced from the film. It's a Hot observed Block. The block has been etched/milled so that the image is raised and your message appears the 'wrong' way round. It is placed in the blocking machine and is heated. Your product is below, held in a jig. Between the two is a 'foil' running from one reel to another. There are two parts to the foil, a carrier film and the foil itself. When the hot block is put, under pressure, against the product with the foil in between, the part of the block in contact with the product is the raised part on which your image appears. The result of this process is that the foil attaches itself to the product in the form of your image, and the carrier film is moved on to bring new foil ready for the next product.

High speed ejection rubber material enables the best results in cutting quality, increases the life of the die and saves the make ready time. It also results in getting the dust free and angle hair cutting. Profile cut rubber is not only fastest but also maintains the perfect pressure between the cutting rule and the cutting plate.

Two stripping ways : Dynamic stripping without lower stripping pins, stripping with lower stripping pins. Customized lower stripping tools with pins for last fast installation and effective waste removal, diversified craftsmanship and material options.

We are the leading manufacturers, exporters and supplier of this products.

The company holds specialization in manufacturing, supplying and exporting the best quality Blister Dies. Blister Dies are widely used in commercial heating presses. Blister Dies are also called as Blister Trays that are made under highly controlled industrial environment. Besides, we are associated with a vast distribution unit which ensures easy, quick and timely delivery of Blister Dies. Highlights

• Quality plywood or aluminum frame used
• Having thermoform shape for giving proper alignment relative to the backing material
• Best quality
• Affordable price range

The company is rated amongst the leading Manufacturers, Suppliers and Exporters of Flatbed Dies. Flatbed Dies offers the cost effective solution to die cut or laser cut the less complex part designs. We manufacture these Flatbed Dies keeping in mind the advanced technology. Besides, our dedicated team of quality auditors performs various tests on Flatbed Dies before the final delivery. Besides, clients are free to place bulk orders of Flatbed Dies as per their requirement. Construction

• Parts are manufactured in a reciprocating die cut press using a steel rule die that is bent to form the desired part.
• A synthetic board holds the steel rule in place.
• The board is laser cut to ensure accuracy

We provide Sticker Cutting Dies that are used for cutting to a special shape, like flowers, stars, circle, sun, moon, kids favorite cartoon characters shapes, etc. A special tool, which is made from a block of wood and steel rule, is used for Sticker Cutting Dies. This Sticker Cutting Die is developed according to the printed sheet, offered by the clients. Also, the clients can put many shapes and sizes in single Sticker Cutting Die. This Sticker Cutting Die is called a Computerized Laser Sticker Cutting Dies Tool. The Sticker Cutting Die Tool is setup with the same layout as the previously printed sheets of stickers. Great care is taken to make sure the steel rules are aligned properly within the Sticker Cutting Dies. Highlights

• Easy to work with
• Long-life
• Sturdy make
• Available in diverse shapes and designs

The Laser Cutting Dies, which we offer, are manufactured in confirmation to the set industrial norms and standards. We are rated among the dependable Manufacturers, Exporters and Suppliers of Laser Cutting Dies. Furthermore, these Laser Cutting Dies can be purchased from us at competitive rates. Why Our Laser Cutting Dies?

• Sturdy make
• Long-life
• Dimensional accuracy
• Pocket-friendly

The Alphabet Cutting Dies, which we offer, are developed according to the printed sheets and shapes provided by the clients. A special tool is made from a black of wood and steel rule that is known as the Alphabet Cutting Die. We are a credible Manufacturer, Exporter and Supplier of Alphabet Cutting Dies. Highlights

• Its 99.9% accurate
• Sturdy make
• Long-life
• Easy to work with

Developed as per the specifications of rubber sheets and shapes given by the clients, these Rubber Cutting Dies are priced at competitive rates. We are rated among the trustworthy Manufacturers, Exporters and Suppliers of Rubber Cutting Dies. Also, we can cater to the bulk requirements of the clients. Highlights

• Use of quality rubber sheets
• Simple to work with
• Customized solutions available
• Highly durable

The Flatbed Cutting Dies, which we offer, are based on the M-Power cutting rule, supplemented by the advanced tool technology with special rule processing. This Flatbed Cutting Die is capable of absorbing for greater pressure than conventional rules. We are among the respected Manufacturers, Exporters and Suppliers of Flatbed Cutting Dies. The Flatbed Cutting Dies are ideally used for smaller production volumes and for less complicated parts. This Flatbed Cutting Die is an efficient and cost-effective method, ensuring low cost and quick turnaround tooling time. With rich experience are deep die-cutting knowledge, we are in position to offer the best Flatbed Cutting Dies for making complex parts. Capabilities

• 0.05 tolerance for dimensions below 10mm and 0.5mm for dimensions above
• Maximum cutting width 315mm
• Maximum cutting length 240mm
• Minimum wall thickness 0.4 mm
• Material to be used in Making of dies
• Imported quality 6, 8, 12 mm imported MDF board
• Imported quality cutting rules