Bharat Metal Alloy - Brass Hollow Rod

• astm b 455
• b 16 c 38500
• c 36000
• bs 2874 cz - 121pb3 or cz124
• is319 grade i/ ii/ iii
• jis3250 h c3604 or c3602

IS 4170 CuZn40

BS 2874 CZ109

JIS 3250 H C2800

ASTM B171 C 36500

IS 4413 CuZn37

BS 2872 CZ108

• IS 320 HT1 or HT2
• BS 2874 CZ114 or CZ115
• JIS 3250H C6782 or C6783

Forging Brass Hollow Rods

ASTM B 124 C37700

BS 2874 CZ 122

IS 3488 Forging Brass

High Leaded Brass Hollow Rods

Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Applications:

Industrial: Pinions, Gears, Valve Stems, Flare Fittings, Adapters, Couplings

Plumbing: Plumbing Fittings, Plumbers' Brass Goods

C28000 is a lead-free material thats well-suited for machining due to its structural composition. It can serve as a cost-effective alternative to traditional lead-containing machining brass, provided that it doesnt need to meet stringent requirements for mechanical properties and corrosion resistance.

Brass hollow rods offers significant economic advantages, by way of removing the need for drilling operations, and very often the boring out of the parts.

Numerous applications, and in particular for the making of taps and valves (plumbing-heating industry), use many components that require the boring out of parts.

Industrial Application:- Widely uses in the automobile industry for synchronizer range and bearing cage and brass retainer.

Profile and Flats Brass Rods

BS249

IS: 319 Gr. l & ll

IS: 8364 Gr. l & ll

BS: 2874 CZ121Pb3

CuZn39Pb3

The lead free naval brass is the result of the composition of 60% copper, 39.2% zinc and 0.8% tin. The addition of tin with zinc results in the high corrosion resistance in sea water. This makes the alloy resistant to dezincification that inhibit the impingement by seawater at higher than normal temperatures. The alloy is also appreciated for its resistance to wear, fatigue, galling, and stress corrosion cracking.

Applications :-

• Builders Hardware : Lock Pins
• Electrical : Precision Shipboard Equipment
• Fasteners: Rivets, Bolts, Nuts
• Industrial:Welding Rod, Condenser Plates, Structural Uses, Valve Stems, Balls, Heat Exchanger Tube, Aircraft Turn Buckle Barrels, Bearings, Dies, Golf Ball Production, Pressure Vessels, Bearings, Bushings, Hub Cones
• Marine: Propeller Shafts, Marine Hardware, Decorative Fittings, Shafting, Propeller Shafts, Turn Buckles
• Ordinance: Missile Components
• Plumbing: Fittings: Baffle Plates And Flanges
• Plumbing: Fittings

Hollow rod manufacturer in India

A hollow rod is essentially a cylindrical tube-like structure with an empty interior. The rods are characterised by their hollow centre, which gives them benefits in weight, flexibility, and versatility as compared to solid rods. If you are looking for a hollow rod manufacturer in India, Bharat Metal Alloy is readily available to meet your demands. Our products are ISI-certified and appreciated for their best quality. The choice of material varies depending on the important factors, which include corrosion resistance, strength, and intended application. We keep the price of every product competitive in the market and ship it all over the world. If you have more queries related to your product in mind, contact us now.

C37700CuZn39Pb2is the most used alloy for machining operations. It has excellent hot working and forging properties. Cold forming is possible only to a minor extend.

Main Applications

Architecture:Ornamental Trim. Consumer: Jewelry, Emblems, Plaques, Medallions. Electrical: Components for the Electrical Industry, Connectors, Rotor Bars, AC Motors. FastenersIndustrial:Metal Goods, Base for Vitreous Enamel, Base for Gold Plate. Ordnance: Primers, Small Arm Ammunition: Primer Caps, Bullet Jackets, Fuse Caps, Firing Pin Support Shells, Bullet. Other:Coins, Tokens, Medals.

These rod are also known as Lead Free Brass Hollow Rods and is mainly used in blanking, riveting , bending, hot forging, watch case and belts, etc.

• IS4413
• IS4170
• DTD-627
• BS2874/86 CZ-109
• BS2872/86 CZ-108

CuZn10 has very good cold forming properties and is well suited for e.g. coinage, beating, embossing. This alloy has a higher strength as pure copper. It has good welding and brazing properties as well as a good corrosion resistant and is not fragile to stress corrosion and dezincification. CuZn10 is principally used in jewelry, metal goods, and watch industry and in electronic industry for installation parts. We produce qualities with grain sizes below 5 mm if needed.

Typical Uses :
Architecture: Weather Stripping, Screen Cloth, Ornamental Trim, Etching Bronze, Grill Work. Builders Hardware: Kick Plates, Hardware. Consumer: Housing for Lipstick Compacts, Costume Jewelry, Caskets, Ball Point Pens. Electrical: Wave Guides, Rotor Bar-AC Motors, Cable Warp. Fasteners: Screw Shells, Bolts, Line Clamps, Rivets. Industrial: Base for Vitreous Enamel, Escutcheons, Flexible Tube, Studs. Marine: Marine Hardware. Ordnance: Small Arms Cartridges, Artillery Projectile Rotating Bands, Press Fit, Primer Caps. Plumbing: Plumbers Brass Goods Typical Applications: Jewelry and metal good, Components for the electrical industry, Lead frames.

C23000 brass is the most durable of all metals for commercial water pipe in the practical price range. Excellent for its resistance to dezincification and season cracking for which the high copper brasses are known. Moderate strength and good retention of spring properties. Specified for underground service lines since it offers greatest corrosion resistance to all types of portable waters. Applications for C23000 brass include costume jewelry, fire hose couplings, zippers, and condenser and heat exchanger tubes. Popular as an outdoor metal and has found for itself a very important place in modern architecture. also known as Nordic Brass. The EN equivalent for this alloy is CuZn15. TYPICAL USES:  Architecture: etching parts, trim, weather strip, Builders Hardware: kick plates, Consumer: badges, coinage, compacts, costume jewelry, dials, fire extinguisher cases, lipstick containers, medallions, nameplates, plaques, rouge boxes, tokens, zippers, Electrical: conduit, rotor bars (AC motors), screw shells, sockets Fasteners: eyelets, fasteners, Industrial: condenser tubes, fire extinguishers, flexible metal hose, heat exchanger shells, heat exchangers, pickling crates, pump cylinder liners, radiator cores, tags, tubing for heat exchangers, tubing for instrumentation, Other fire hose couplings Plumbing fittings, j-bends, pipe, pipe nipples, pipe service lines, pump lines, service lines, traps 

Architectural bronze alloys enhance the inside and outside appearances of buildings and last for a long time. They are available in many forms and are generally completed by waxing.

UNS C38500 architectural bronze alloys have a yellow-gold color. The following datasheet provides an overview of UNS C38500 bronze alloys.

Fabrication and Heat Treatment

Annealing

UNS C38500 architectural bronze alloys are annealed between 427 and 593C (800 and 1100F).

Cold Working

UNS C38500 bronze alloys have poor cold working capacity.

Welding

Brazing and soldering processes are recommended for UNS C38500 bronze alloys. Welding processes not recommended for these alloys include spot welding, gas shielded arc welding, seam welding, coated metal arc welding and oxyacetylene welding

Forging

UNS C38500 bronze alloys can be forged between 621 and 732C (1150 and 1350F).

Machinability

UNS C38500 bronze alloys have a machinability rating of 90.

Hot Working

UNS C38500 bronze alloys have excellent hot forming capacity.

Applications

UNS C38500 architectural bronze alloys are used for trim and architectural hardware.

The C66800 Manganese Brass comes under the category of naval brass and is composed of 60% copper, 39.2% zinc and 0.8% tin. In compliance with typical naval brass the alloy possess good strength as well as rigidity. The corrosion resistance towards sea water is achieved due to the presence of zinc in place of tin. The addition of tin also makes the alloy resistant towards dezincification, fatigue, galling, and stress corrosion cracking.

Typical Applications:

Gears

Sealing Rings

Thrust Bearings

Bushings

Cams

Spindles

Bearings

Idler Pins

Connecting Rods

Drive Shafts

Valve Seats

Sleeve Bearings

Piston Heads

High Leaded Brass Hollow Rods

Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Applications:

Industrial: Pinions, Gears, Valve Stems, Flare Fittings, Adapters, Couplings

Plumbing: Plumbing Fittings, Plumbers' Brass Goods