Our Products

Mevada Engineering Works - Allied Machinery

We are leaders in the market for providing best range of Colloid Mill, Coating Pan Machine, Vibro Shifter, Multi Mill and Rapid Mixer Granulator

Colloid Mill is widely used to mix liquid homogeneously
All contact parts are made out of SS 304 (SS 316 on demand at extra charges)
Coupling provided between motor shaft and rotor shaft for ease in maintenance Vertical Model
Three oil seals between the motor and the processing chamber to prevent liquid going in the motor winding, resulting in the burning of the motor
Extended Bearing Housing specially designed to facilitate fine adjustment of bearing clearances of back lash to avoid metal contact of Rotor in Vertical Model
Special design facilitates adjustment of grinding gap by an exterior screw by means of handle even during operation.
Discharge spout provided as a standard for viscous material
Contact parts can be easily dismantled for cleaning

Description

Machine Model	Colloid Mill
Output	12 to 100 Kg/Hour
All Contact Parts	Stainless Steel - 316 / 316 L. (Optional)
All Non-Contact Parts	Stainless Steet.li-s104. (Optional - M.S.)
Particle size reduction	5 to 10 Microns
Hopper capacity	15 -18 Litters
Motor	5HP / 2800 RPM / 3 Ph
Height	1100 mm
Wheels & Base	PU-Castor Wheel or Anti Vibration Pad

As per GMP Guide lines.
Also available with Standard Painted Model & for small scale laboratory purpose.
Conventional Coating Pan with very sturdy M.S structure made of angles & channels which are covered from all the sides by covers & doors.
The Coating Pan drive is through standard make heavy duty worm reduction gear box & electrical motor by means of belt and pulley drive fitted on a rigid structure. Coating Pan Speed can be changed through variable speed pulley mounted on the shaft of electric motor (AC Variable Frequency Drive Optional with extra cost).
Coating Pan made of SS 304 / SS 316 or SS 316L material and mirror polished from inside & outside.
Baffles either welded or detachable (welded are the standard supply if not specified) provided inside the pan considering production requirements.
Easy mounting arrangement considering changeover of coating / polishing pan Separate mobile Hot Air Blower System is provided for easy operation.
Digital Temperature Controller provided with necessary temperature control device with interlocking for heater function.

Description

All Contact parts of the machine is made from SS 304/SS 316 (Optional).
Design of the machine compliance with GMP Standards.
Ergonomic design & convenient for operation.
Beaters & Scraper Blades, Pin and Housing is made from Stainless Steel.
Beaters assembly is swing type, dynamically balanced, which reduces vibration and noise level and increases bearing life.
12 nos. Beaters are of knife and impact edges & 2 nos. beaters are of scrapper blades types.
Machine can be run in reverse direction also by DOL Starter
Cylindrical screen for higher output.
Flameproof electrical Motor and Starter is available(Optionally)
Castor wheel of PU Material is provided for easy mobility.
S.S. perforated screen Dia. 0.5, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 15, 20 available.
S. S. Wire Mesh Sieve - 4, 6, 8, 10, 12, 14, 16, 20, 24, 30, 40, 50, 60 Mesh size available.

Description

Machine Model	Multi Mill
Output	50 to 200 kg./Hr.
Rotor Assembly Diameter	250 mm. Approx.
Rotor Speed	780/1500/2330/3000 RPM
Beaters	12 nos. with knife and impact edges and 2 nos. Scraper
Motor	Inner Diameter 265 mm/Height 140 mm
Starter	"DOL" with reversible switch
Material Charging Height	1460 mm
Material discharging Height	760.5 mm

Tell Us What are you looking for? Will call you back

Vaibhav Mevada(Mevada Engineering Works)
2/40, Ground Floor, Poojari Layout, RMV, 2nd Stage, 2nd Stage, RMV 2nd Stage, Bengaluru, Karnataka - 560094, India
Share us via
Manufacturers In Bengaluru