Ahmedabad, Gujarat, India
Our Products
The PBM Series 3 Roll Pyramid Type Hydro Mechanical Plate Bending Machines are designed with top roll UP & DOWN movement by hydraulic cylinder. This saves time & labor to adjust top roll. This feature makes the machine more productive and suitable for handling heavy jobs. Dropper end movement is done by hydraulic cylinder.
| Production Specification |
Plate width max. (mm) |
Plate Thickness max. (mm) |
Min. rolling dia. (mm) |
Uper roller dia. (mm) |
Uper roller dia. (mm) |
Lower Roller dia. (mm) |
Lower Roller dia. (mm) |
Lower roller central distance |
|---|---|---|---|---|---|---|---|---|
| PBM 315 | 1500 | 3 | 300 | 150 | 150 | 130 | 130 | 200 |
| PBM 320 | 2000 | 3 | 300 | 150 | 150 | 130 | 130 | 200 |
| PBM 415 | 1500 | 4 | 400 | 175 | 175 | 155 | 155 | 250 |
| PBM 420 | 2000 | 4 | 400 | 175 | 175 | 155 | 155 | 250 |
| PBM 425 | 2500 | 4 | 400 | 175 | 175 | 155 | 155 | 250 |
| PBM 620 | 2000 | 6 | 500 | 175 | 175 | 155 | 155 | 250 |
| PBM 625 | 2500 | 6 | 500 | 175 | 175 | 155 | 155 | 250 |
| PBM 630 | 3000 | 6 | 500 | 175 | 175 | 155 | 155 | 250 |
| PBM 820 | 2000 | 8 | 500 | 190 | 190 | 170 | 170 | 250 |
| PBM 825 | 2500 | 8 | 600 | 190 | 190 | 170 | 170 | 280 |
| PBM 830 | 3000 | 8 | 600 | 200 | 200 | 180 | 180 | 280 |
| PBM 1020 | 2000 | 10 | 600 | 200 | 200 | 180 | 180 | 280 |
| PBM 1025 | 2500 | 10 | 600 | 225 | 225 | 200 | 200 | 280 |
| PBM 1030 | 3000 | 10 | 600 | 225 | 225 | 200 | 200 | 280 |
| PBM 1220 | 2000 | 12 | 600 | 250 | 250 | 225 | 225 | 280 |
| PBM 1225 | 2500 | 12 | 650 | 250 | 250 | 225 | 225 | 280 |
| PBM 1230 | 3000 | 12 | 750 | 250 | 250 | 225 | 225 | 320 |
| PBM 1620 | 2000 | 16 | 650 | 280 | 280 | 250 | 250 | 360 |
| PBM 1625 | 2500 | 16 | 750 | 280 | 280 | 250 | 250 | 320 |
| PBM 1630 | 3000 | 16 | 850 | 325 | 325 | 280 | 280 | 360 |
| PBM 2025 | 2500 | 20 | 850 | 325 | 325 | 280 | 280 | 440 |
| PBM 2030 | 3000 | 20 | 850 | 350 | 350 | 300 | 300 | 440 |
| MODEL NO. | BPB 25 (MECHANICAL) | BPB 50 (MECHANICAL) | BPB 50 (HYDRAULIC) | BPB 75 (HYDRAULIC) |
|---|---|---|---|---|
| Tube OD x Thickness | 25X2 mm | 32 X 2 mm | 50×4 mm | 75X4 mm |
| Square | __ | __ | 40 x 40 x 3 mm | 65 x 65 x 3 mm |
| Rectangular Tube | – | – | 30 x 40 x 4 mm | 40 x 60 x 40 mm |
| Higher Radius | __ | __ | on request | on request |
| Minimum Radius Possible | 2.5 D (D=Tube Dia) | 2.5 D (D=Tube Dia) | 2.5D (D=Tube Dia) | 2.5 D (D=Tube Dia) |
| Bend Angle | 10 to 180° Degrees | 10 to 180° Degrees | 10 to 180° Degrees | 10 to 180° Degrees |
| Bending Speed | 4 rpm | 4 rpm | 0-90 -°/10SC | 0-90 -° /15SEC |
| Bending Direction | Clockwise & Anticlockwise | Clockwise & Anticlockwise | Clockwise & Anticlockwise | Clockwise & Anticlockwise |
| Bend Accuracy | ±1°-2° | ±1° -2° | ±1°-2° | ±1°-2° |
| Tube Indexing | Manual | Manual | Manual | Manual |
| Tube Positioning | With Suitable Fixture | With Suitable Fixture | With Suitable Fixture | With Suitable Fixture |
| Length Setting | Manual | Manual | Manual | Manual |
| Tube Holding Controls | Manual | Manual | Manual | Manual |
| Power | 2 HP | 2 HP | 5 HP | 7.5 HP |
| Model No. | Overall D Machine S Size (inch) | a. of crew inch | Thickness of U.S. Plate use in Side (mm) | Cro i Ram (inch) |
ss-Sectio Blade (inch) | lal Size of Bar (inch) | Girder (inch) | No. Slits Ba | 3f Bendinc in Length (inch) | Centre Distance Available (inch) | Bending Capacity in Thickness (S.W.G.) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PMS-1 | 100x33x42 | 4 | 16 | 12×2% (Solid) | 6xM | 4×4 | 12×6 | 7 | 100 | 15 | 10 |
| PMS-2 | 96x33x42 | 4 | 16 | 12×2% (Solid) | 6×5’8 | 4×4 | 12×6 | 7 | 96 | 15 | 10 |
| PMS-3 | 96x31x41 | 3/2 | 12 | 12×2 (Solid) | 6x’/2 | 31/2X 3% | 12×5% | 7 | 96 | 13 | 12 |
| PMS-4 | 84x31x41 | 3/2 | 12 | 12×2 (Solid) | 6x% | 3%x 3% | 12×5% | 7 | 84 | 13 | 12 |
| PMS-5 | 96x30x40 | 3™ | 10 | 12×3 (Hollow) | 5×5,! | 3″BX3″8 | 12×5% | 6 | 96 | 11 | 14 |
| PMS-6 | 84x30x40 | 3„« | 10 | 12×3 (Hollow) | 5×5’8 | 12×5 | 6 | 84 | 11 | 14 | |
| PMS-7 | 96x28x39 | 2% | 8 | 12×3 (Hollow) | 5×5’8 | 31/8X31/8 | 10×5 | 6 | 96 | 10 | 16 |
| PMS-8 | 84x28x39 | 2% | 8 | 12×3 (Hollow | 5xM | gl’BXgl/S | 10×5 | 6 | 84 | 10 | 16 |
The fundamental Principle of the Magnetic Bending Machine is that it uses electromagnetic, rather than mechanical, clamping system. The machine consists of a long electromagnet with a steel clamp bar located above it. The sheet metal is clamped between the two by an electromagnet capable of clamping with a force range of between 3-10 tons. Rotating the bending beam then forms the bend. The sheet is bent around the front edge of the clamping bar. They have application in many ways with four various sets clamping bars.
| Model | EB625 | EB1000 | EB1250 | EB2000 | EB2500 | EB33200 |
|---|---|---|---|---|---|---|
| Max. Bending Capacity | 625 x 1.6mm | 1000 x 1.6mm | 1250 x 1.6mm | 2000 x 1.6mm | 2500 x 1.6mm | 3200 x 1.2mm |
| Clamping Force | 3 Ton | 4.5 Ton | 6 Ton | 9 Ton | 12 Ton | 10 Ton |
| Duty Cycle | 30% | 30% | 30% | 30% | 30% | 30% |
| Back Gauge | 390mm | 640mm | 640mm | 640mm | 640mm | 640mm |
| Foot Switch | N/A | N/A | Standard | Standard | Standard | Standard |
| Nominal Current | 4 Amp | 6 Amp | 6 Amp | 12 Amp | 15 Amp | 15 Amp |
| Protection | Thermal Cutout 70° C | Thermal Cutout 70° C | Thermal Cutout 70° C | Thermal Cutout 70° C | Thermal Cutout 70° C | Thermal Cutout 70° C |
| Bending Edge Length | 670mm | 1050mm | 1300mm | 2090mm | 2590mm | 3290mm |
| Distance Between Filters | 630mm | 1010mm | 1260mm | 2028mm | 2528mm | 3228mm |
| Packing Size | 830 x 1120 x 380mm | 1200 x 1120 x 380mm | 1450 x 1120 x 380mm | 2200 x 1120 x 380mm | 2700 x 1120 x 380mm | 3700 x 1120 x 380mm |
| Net Weight | 100Kgs. | 140Kgs. | 175Kgs. | 290Kgs. | 330Kgs. | 400Kgs. |
| Model | RBM-30 | RBM-30HV | RBM-40HV | RBM-50 |
|---|---|---|---|---|
| Diameter of Roller | 30mm | 30mm | 40mm | 50mm |
| Motor Power | 1.50 HP | 1.00 HP | 2.00 HP | 3.00 HP |
| Spindle Speed | 9r/mm | 9r/mm | 9.3r/mm | 13r/mm |
| Packing Dimension | 820x620x1260mm | 1200x750x1210mm | 1400x950x1340mm | 1000x820x1550mm |
| Net Weight | 270Kgs. | 245Kgs. | 425Kgs. | 450Kgs. |
| MODEL | HRBM-65 |
|---|---|
| Diameter of Roller | 65mm |
| Motor Power | 3.00 HP |
| Spindle Speed | 9.3r/mm |
| Packing Dimension | 1250x1150x18.0mm |
| Net Weight | 720Kgs. |
| Model | TB-12 |
|---|---|
| Thickness max | 1.2mm |
| Cylinder length | 140mm |
| Throat Depth | 200mm |
| Net weight | 48kg |
| Packing size | 670x320x600mm |
| Capacity | 3/8″ 1″ | 1/2″to 2″ | 1/2″to 3″ |
| Pressure | 10 Ton | 15 Ton | 15 Ton |
| Former’s Size | 3/8″, 1/2″, 3/4″, & 1″ |
1/2″, 3/4″, 1″, 1.1/4″, 1.1/2″, & 2′ |
1/2″, 3/4″, T’,1.1/4″, 11.1/2″, & 2″ 2.1/2″, & 3″ |
Machine body is steel (St-52) construction.On PR0100 rolls are driven by hydraulic motor+planetry gearbox and gears.Shafts made of special steel (42 CrMo4), hardened and grounded.PR0100 side guide rolls are manual adjustable.Horizontal & Vertical working.Electrical and hydraulic protection against overloads.Digital display for bottom rolls.Lower rolls hydraulic moveable up and down.Separate and moveable control panel.Manual lubricationIn accordance for CE For bending without deformation and for serial production special rolls are required. Special profile rolls for pipe, profile and angle materialsSpiral bending deviceVariable speed of rotationAdjustable hydraulic guide rolls in two directionsMechanical guide rolls for angle bendingDigital readout for guide rollsNC playback control systemCMC graphic control system
