Our Products
Model No | J-1013 | J-1018 | J-1010 | J-1014 | J-1015 | J-1019 | J-1025 |
---|---|---|---|---|---|---|---|
mm/inch | mm/inch | mm/inch | mm/inch | mm/inch | mm/inch | mm/inch | |
Surfacing capacity | 330/13" | 455/18" | 254/10" | 330/13" | 381/15" | 455/18" | 610/24" |
Max.planing width | 330/13" | 455/18" | 254/10" | 330/13" | 381/15" | 455/18" | 610/24" |
Thickness capacity | 177/7" | 177/7" | 177/7" | 177/7" | 177/7" | 177/7" | 177/7" |
Length of surface table | 1220/48" | 1550/61" | 1140/45" | 1220/48" | 1295/51" | 1550/61" | 1550/61" |
Rebating capacity | 12.5/1/2" | 9/3/8" | 12.5/1/2" | 12.5/1/2" | 12.5/1/2" | 12.5/1/2" | 12.5/1/2" |
Length of thickness table | 560/22" | 660/26" | 635/25" | 640/25 1/4" | 710/28" | 735/29" | 800/31 1/2" |
Min.length of workpiece for thicknessing | 254/10" | 254/10" | 254/10" | 254/10" | 254/10" | 254/10" | 254/10" |
Feeding speed (feet per minute) | 21 | 21 | 24 | 24 | 24 | 24 | 24 |
Cutter block diameter | 95/3.75" | 95/3.75" | 95/3.75" | 95/3.75" | 95/3.75" | 105/4.15" | 120/4.72" |
Cutter block speed(rpm) | 4000 | 4000 | 4000 | 4000 | 4000 | 4000 | 4000 |
Standard cutter block- code no | 3B | 3B-W | 2B | 2B | 2B | 3B-W | 3B-W |
Circuler saw table size | 610*305/24"*12" | 610*305/24"*12" | 610*305/24"*12" | 610*305/ 24"*12" | 610*355/24"*12" | 610*355/24"*14" | 610*355/24"*14" |
Up/down movement of cir.saw table | 75/3" | 75/3" | 75/3" | 75/3" | 75/3" | 75/3" | 75/3" |
Max.circular saw diameter | 300/12" | 300/12" | 300/12" | 300/12" | 300/12" | 300/12" | 300/12" |
Power required -hp/rpm | 3/1440 | 5/1440 | 3/1440 | 3/1440 | 3/1440 | 5/1440 | 5/1440 |
THICKNESS PLANNER | Popular | Popular (Open Stand ) | |||
---|---|---|---|---|---|
Model no | J-411 | J-412 | J-413 | J-312 | J-313 |
J-401 | J-402 | J-403 | |||
mm/inch | mm/inch | mm/inch | mm/inch | mm/inch | |
Max. Planing width | 330/13" | 455/18" | 610/24" | 254/10" | 330/13" |
Thicknessing capacity | 200/8" | 200/8" | 200/8" | 177/7" | 177/7" |
Length of thickness table | 660/26" | 660/26" | 760/30" | 610/24" | 660/26" |
Min. Length of workpiece for thicknessing | 254/10" | 254/10" | 254/10" | 254/10" | 254/10" |
Feeding speed (feet per minute) | 24 | 24 | 24 | 24 | 24 |
Cutter block diameter | 95/3.75" | 95/3.75" | 95/3.75" | 95/3.75" | 95/3.75" |
Cutter block speed (rpm) | 4000 | 4000 | 4000 | 4000 | 4000 |
Standard cutter block-code no | 2B | 2B | 2B | 2B | 2B |
Power required hp/rpm | 3/1440 | 3/1440 | 5/1440 | 2/1440 | 3/1440 |
SPINDLE MOULDER | Prima | Max | Master |
---|---|---|---|
Model No | J-1504 (ST) | J-504(T) | J-504 (H) |
mm/inch | mm/inch | mm/inch | |
Work table size | 1120x480/ 44"x19" | 835x760/ 33"x30" | 835x835/ 33"x33" |
Sliding table size | 1120x280/ 44"x11" | - | - |
Sliding table movement | 1000/39" | - | - |
Spindle diameter | 30/1 3/16" | 31.75/1 1/4" | 31.75/1 1/4" |
Up/down movement of spindle | 75/3" | 100/4" | 125/5" |
Arbour tilt-degree | - | 45 | - |
Spindle speed (rpm) | 6000/8000 | 6000 | 6000 |
Power required hp/rpm | 5/2800 | 3/2800 | 3/2800 |
Note : Mitre gauge with the wood clamping facility available in model J-1504 (ST) & J-504 (T).
Model No | J-404 |
---|---|
mm/inch | |
Work table size | 610X610/24"X24" |
Spindle diameter | 31.75/1 1/4" |
Up/down movement of spindle | 100/4" |
Spindle speed (rpm) | 6000/9000 |
Power required hp/rpm | 2/2800 |
Note:- single auto mould J-505 also available.
Double Auto Mould | Auto Mould | ||
---|---|---|---|
Model No | Main Side J-507 | 2 nd Side | J-505 |
mm/inch | mm/inch | mm/inch | |
Work table size | 455x150 /18"x6" | 455 x 150/18" x 6" | 455x150/18"x6" |
Up/down movement of table | 100/4" | 63/2 1/2" | 100/4" |
Longitudinal movement of table | 50/2" | 25/1" | 50/2" |
Table tilt-degree | 15 | - | 15 |
Feeding speed (feet per minute) | 24 | 24 | 24 |
Moulding block speed (rpm) | 4000 | 4000 | 4000 |
Max.moulding block width | 114/4 1/2" | 75/3" | 114/4 1/2" |
Moulding block diameter | 95/3 3/4" | 95/3 3/4" | 95/3 3/4" |
Power required hp/rpm | 3/1440 | - | 3/1440 |
Model No | J-901 |
---|---|
mm/inch | |
Throat clearance | 380/15" |
Spindle vertical movement | 25/1" |
Work table size | 355x355/14"x14" |
Up/down movement of table | 125/5" |
Routing work table size | 610x420/24"x161/2" |
Table tilt degree | 15 |
Spindle speed (rpm) | 11000 |
Power required hp/rpm | 1.5/2800 |
Model no | J-924 | J-923 |
---|---|---|
mm/inch | mm/inch | |
Length of bed -6.5ft | 1805/71" | 1980/78" |
Height of centres | 220/8 5/s" | 165/61/2M |
Admit between centres | 1000/39 3/8" | 1220/48" |
Max.work diameter | 200/8" | 150/6" |
Min.work diameter | 50/2" | - |
Max.working length | 970/38 1/8" | - |
Standard pitches | - | 100/4",125/5",150/6", |
175/7",250/10" | ||
Divisions | - | UP TO 6 |
Face plate diameter | 265/10.5" | |
Spindle speed (rpm) | 570/1000 /1850/2500 | - |
Power required -hp/rpm | 1.5/1440 | SINGLE PHASE |
Model No | J-634(ST) | J-634 |
---|---|---|
mm/inch | mm/inch | |
Max circular saw diameter | 355/14" | 355/14" |
Max.depth of cut | 114/41/2" | 114/4 1/2" |
Arbour tilt-degree | 45 | 45 |
Work table size | 915x785/36"x31" | 915x785/36"x31" |
Sliding table size | 710x400/28"/15 3/4" | - |
Sliding table movement | 1000/39" | - |
Size of dust collection port-dia | 100/4" | 100/4" |
Circular saw speed (rpm) | 4000 | 4000 |
Power required hp/rpm | 3/1440 | 3/1440 |
Note :- m/c with motor of 1.5 hp 1 - phase at extra cost
MAX | Master | Popular | |
---|---|---|---|
Model No | J-930(H) | J-930 | J-930(E) |
mm/Inch | mm/Inch | mm/Inch | |
Table size | 560 x 255/ 22" x 10" | 550 x290/21.1/2"x111/2" | 560x255/22"x10" |
Up/down movement of table | 90/31// | 75 / 3" | 75/3" |
Cross movement of table | 100/4" | 100/4" | 100/4" |
Longitudinal movement of table | 305/ 12" | 305/ 12" | 305/ 12" |
Max.depth of cut | 140/51/2" | 140/51/2M | 140/5 54" |
Power required hp/rpm | 3/1440 | 2/1440 | 2/1440 |
Model No. | J-911 | J-921 | J-931 |
---|---|---|---|
4.5 ft | 6 ft | 8 ft | |
mm / inch | mm / inch | mm / inch | |
Length of bed | 1370/54" | 1825/72" | 2435/96" |
Width of bed | 215/81/2m | 215/8 54" | 215/81/2" |
Height of centres | 165/61/2m | 203/8" | 203/8" |
Admit between centres | 760 / 30" | 1220 / 48" | 1830 / 72" |
Approx.Spindle speed (RPM) | 700/1400/2800 | 700/1400/2800 | 700/1400/2800 |
Faceplate diameter | 190 / 7 1/2 m | 190 / 7 1/2" | 190 / 7 1/2" |
Power required HP/RPM | 1 / 1440 | 1 / 1440 | 1 / 1440 |