Testing Services #1372701

CDG provides ISO 17025-accredited ingress protection services in India.

What is ip55?

IP55. Water projected by a nozzle against the enclosure from any direction shall have no harmful effect. IP56. Water from heavy seas or water projected from jets shall not enter the machine in any harmful quantity.

What does ip55 rating mean?

IP65 Enclosure IP rated as dust tight and protected against water projected from a nozzle. IP66 Enclosure IP rated as dust tight and protected against heavy seas or powerful jets of water. IP 67 Enclosures IP rated as dust tight and protected against immersion.

What is the ip55 standard?

Nema Enclosures Manufacturing Corporation uses the IECs standardized International (or Ingress) Protection Code system for measuring enclosures capabilities. We carry IP55 enclosures that demonstrate almost complete protection from particles and a good level of protection against water.

Request for IP55 Testing Report

Why Choose Us For IP55 Testing?

We are a leading provider of comprehensive testing services in India. Our global network of technical experts, combined with our state of the art testing laboratories, assure a single source solution for meeting all applicable requirements, standards and voluntary schemes. And technical professionals are actively involved in international advisory boards and standards development activities, ensuring the most up to date knowledge of current and changing requirements.

Represented in all over India, We have an unsurpassed track record of meeting and exceeding the requirements and expectations of our client companies. The brand and our distinctive blue octagon mark are instantly recognized around the globe as symbols of quality and safety Testing and will increase customer confidence in your brand.

We can assist companies in low-cost life testing and evaluating of their products for pre-compliance and compliance testing to schemes such as The Carbon Trust Enhanced Carbon Allowance.

What is IP55 rating?

IP55 stands for Ingress Protection55, and it indicates that a phone has been tested against dust and water for up to 55 minutes at a pressure of one atmosphere (or about 10 centimeters of air).

To put this in simpler terms: That means that for most phones with an IP55 rating, no problem should occur even after being left exposed to water from any angle including from above if you happen to have your phone out of sight at ground level.

IP ratings are an international standard, dating back to 1959. Theyre meant to identify the resistance of a device to dust and water. As a rule of thumb the higher the left or right number, the higher the protection it has against dust or water.

Is IP55 waterproof?

The short answer: No, IP55 is not waterproof. Thats not to say that IP55 is not a good water-resistant rating. It is, but the most important factor that makes a phone waterproof is the O-ring seal, which is typically found around the camera and on the back of some devices, such as the iPhone X.

The seal is what keeps water out without also letting dust in. IP55, on the other hand, is not designed to keep water out but only to keep it at a certain level for a certain amount of time. So, yes, it will survive a rainstorm or an accidental dip in the pool. But it wont stop a hosepipe or a garden sprinkler.

IP55 Water and Dust Resistance testing method

The test protocol for IP55 is very similar to the one used for IP68. First, the device is submerged in water and then dried off with a clean cloth. Water pressure is applied for a set amount of time. The IP rating scale is as follows:

IP54: Protection against dust for up to 5 minutes under water pressure of one bar

IP55: Protection against dust for up to 55 minutes under water pressure of one bar

IP56: Protection against dust for up to 5 minutes under pressure of two bar

IP58: Protection against dust for up to 30 minutes under pressure of two bar

CDG provides ISO 17025-accredited ingress protection services in India.

IP66 Testing Labs offers a full range of IP66 Testing services. We have fully equipped to test and approve a wide range of electrical products and equipment for organizational and governmental certifications, from battery chargers and lighting equipment to medical electrical equipment and wireless devices.

IP66 Enclosure IP rated as dust tight and protected against heavy seas or powerful jets of water.

IP66 Defining Characteristics:

Complete protection from dust, oil, and other non-corrosive material

Complete protection from contact with the enclosed equipment

Protection from water, even from powerful jets of water

Engraving, silk-screening, and anodizing services available

Custom with cutouts, insulation, hinges, latches or locks

IP66 WATER

1. Protected against vertically falling drops of water. Limited ingress permitted.

2. Protected against vertically falling drops of water with enclosure tilted up to 15 degrees from the vertical. Limited ingress permitted.

3 Protected against sprays of water up to 60 degrees from the vertical. Limited ingress permitted for three minutes.

4. Protected against water splashed from all directions. Limited ingress permitted.

5. Protected against jets of water. Limited ingress permitted.

6. Water from heavy seas or water projected in powerful jets shall not enter the enclosure in harmful quantities.

7. Protection against the effects of immersion in water between 15 cm and 1 m for 30 minutes.

8. Protection against the effects of immersion in water under pressure for long periods.

IP66 SOLIDS

1. Protected against a solid object greater than 50 mm 4pr A-.1 such as a hand.

2. Protected against a solid object greater than 12.5 mm such as a finger.

3. Protected against a solid object greater than 2.5 mm such as a screwdriver.

4. Protected against a solid object greater than 1 mm such as a wire.

5. Dust Protected. Limited ingress of dust permitted. Will not interfere with the operation of the equipment. Two to eight hours.

6. Dust-tight. No Ingress of dust. Two to eight hours.

Why choose CDG for IP65 Testing?

We are a leading provider of comprehensive testing services for electrical and LED lighting products. Our global network of technical experts, combined with our state-of-the-art testing laboratories, assure a single source solution for meeting all applicable requirements, standards and voluntary schemes. And technical professionals are actively involved in international advisory boards and standards development activities, ensuring the most up to date knowledge of current and changing requirements.

We are a unique entity in the industry, actively committed towards offering an optimum quality IP66 Certification Services. This service is widely acknowledged by our precious clients owing to its promptness and cost-effectiveness features. Our skilled professionals provide this service in the best possible manner. The provided service is executed by our adept professionals using optimum quality tools and latest technology. Moreover, our precious clients can avail this service from us at most reasonable price.

CDG is an ISO 17020-accredited inspection agency & ISO 17025-accredited testing laboratory for ISO 17712 testing & certification.

What is new in ISO 17712:2013?

Proof of tampering remains an essential area in the new edition, but there is a significant change in approach. The new edition addresses tampering via third party procedure inspections as part of the manufacturers ISO 9001 quality operational processes.

ISO 17712 no longer needs third party laboratory testing against exact tamper related criteria. Instead, the necessity for tamper-related quality processes include internally-generated and -managed tests of tamper proof as part of a manufacturers documented quality program like ISO 9001.

A manufacturer may choose to conduct the tamper-evident testing in-house or employ a third party laboratory. In any case the testing would be against the manufacturers test protocol and specification. Since Clause 6 has neither tamper-evident test procedures nor a necessity for accredited testing, an outside lab cannot certify conformance with ISO 17712 Clause 6. A third party lab in such a condition basically provides a lab report to its client.

Benefits of ISO Pas 17712:2013

Expand safety

Extend correct collection of taxes and duties

Get better border protection

Important increase in inspection rate

Minimize corruption

Minimize container tampering and thefts

Facilitate trade

Speed up logistic processes

Seals that conform to this International Standard are suitable for other applications, such as bulk railcars or truck trailers used in cross-border and domestic operations. Users and regulatory agencies can apply this International Standard to other applications as they deem appropriate

high-security seal-seal that is constructed and manufactured of material such as metal or metal cable with the intent to delay intrusion. High-security seals can generally be removed with substantial bolt cutters or cable cutters.

security seal-seal that is constructed and manufactured of material that provides limited resistance to intrusion and requires lightweight tools for removal

indicative seal-seal that is constructed and manufactured of material that can easily be broken by hand or by using a simple snipping tool or shear

Manufacturer-company or entity that either owns the seal-producing factory or contracts to buy made-to-order seals for resale from a third-party factory.

Scope

This International Standard establishes uniform procedures for the classification, acceptance, and withdrawal of mechanical freight container seals. It provides a single source of information on mechanical seals which are acceptable for securing freight containers in international commerce.

NOTE The purpose of mechanical seals is, as part of a security system, to determine whether a freight container has been tampered with, i.e., whether there has been unauthorized entry into the container through its doors. Seals can be effective only if seal users properly select, store, account for, apply, document, and attend to seals prior to use and in use; while these issues are not addressed in this International Standard, they are relevant to successful use of the seals covered by this International Standard.

CDG is an ISO 17020-accredited inspection agency & ISO 17025-accredited testing laboratory for ISO 17712 testing & certification.

ISO/PAS 17712 establishes uniform procedures for the classification, acceptance, and withdrawal of acceptance of mechanical freight container seals. It provides a single source of information on mechanical seals which are acceptable for securing freight containers in international commerce. ISO/PAS 17712:2003 is not applicable to special-purpose seals, such as fibre-optic and sophisticated electronic seals.

ISO 17712 addresses all types of security seals usable on maritime containers. Since many other industries use the same seals, members of those industries also may choose to adopt ISO 17712.

Compliance with ISO 17712 requires independent confirmation in three areas: -

Physical testing to determine a seal's classification for physical strength.

Process auditing of supplier security-related business processes.

Physical testing that earns a "Pass" grade for evidence of tampering.

The ISO/PAS 17712:2013 standard need that container freight seals meet or exceed certain standards for strength and durability so as to prevent accidental breakage, early deterioration (due to weather conditions, chemical action, etc.) or undetectable tampering under usual usage. ISO/PAS 17712:2013 also needs that each seal be clearly and legibly marked with a unique recognition number.

ISO 17712:2013 establishes uniform process for the classification, acceptance, and withdrawal of mechanical freight container seals. It provides a single source of information on mechanical seals which are acceptable for securing freight containers in international commerce.

Benefits of ISO Pas 17712:2013

Minimize container tampering and stealing.

Facilitate trade.

Expand safety.

Make bigger correct collection of taxes and duties.

Get better border security.

Significant expand in inspection rate.

Minimize corruption.

Speed up logistic procedures.

ISO 17712 establishes uniform procedures for the classification, acceptance, and withdrawal of acceptance of mechanical freight container seals. ISO 17712:2013 is not applicable to special-purpose seals, such as fibre-optic and sophisticated electronic seals. ISO 17712:2013 is a globally accepted standard for performance of freight container mechanical seals. CDG provides ISO 17712 certification for mechanical seals which is acceptable for securing freight containers in international commerce. ISO 17712 addresses all types of security seals usable on maritime containers. Since many other industries use the same seals, members of those industries also may choose to adopt ISO 17712.

Compliance with ISO 17712 requires independent confirmation in three areas:

- Physical testing to determine a seal's classification for physical strength.

- Process auditing of supplier security-related business processes.

- Physical testing that earns a "Pass" grade for evidence of tampering.

ISO 17712 defines three types of classes of seal strength or barrier capacity: I for Indicative; S for Security; and H for High Security. CDGs certification process involves: Testing to determine a seals physical strength, auditing of manufacturers security-related business processes & inspection of seals design and construction to check tamper indicative features that generate tell-tale evidence of tampering. CDG is a world leading inspection, testing & certification company. We have ISO 17020 accreditation to act as an inspection agency & our test lab is accredited for ISO 17025 standard. We also hold ISO 17021 accreditation for management system certification.

PAS / ISO 17712:2013 is a standard for machenical seals. CDG is the world leading company in PAS / ISO 17712 certification. Accoreding to C-TPAT guidelines & some other safety standard PAS / ISO 17712 certified seal is manadatory for containers & trucks. Call us today for PAS ISO 17712 certification in India & worldwide.

CDG is an ISO 17020-accredited inspection agency & ISO 17025-accredited testing laboratory for ISO 17712 testing & certification.

ISO 17712 is the standardised document that establishes uniform procedures for the classification, acceptance, and withdrawal of mechanical freight container seals. It provides a single source of informationon mechanical seals which are acceptable for securing freight containers ininternational commerce.ISO 17712 defines three types of classes of securityseal strength, or barrier capacity, I for Indicative, S for Security and H forHigh Security. CTPAT requires the use of H class seals. Suppliers must useindependent third party test laboratories to validate a security seals classification. The test laboratory must also be accredited according to ISO IEC17025 General requirements for the competence of testing and calibration laboratories to perform testing specific to ISO 17712.The ISO 17712 standardrequires independent testing against three main categories, Mechanical Testing to determine a security seals physical strength Clause 5.H Class Security Seals or High Security Seals are manufactured to the highest standards and are marked with a H on the seals body. The mostpopular high security seals are bolt seals and cable seals.In May 2014, new requirements were published for ISO 17712 2013, for all security seals to becompliant, they must be categorized and marked H as High Security Seals. Whenundergoing mechanical testing by an independent ISO 17025 accredited laboratoryClause 5 and the manufacturer must be certified to both ISO 9001 and ISO 17712 Annex A.Seals be designed and constructed with tamper indicative featuresthat generate tell-tale evidence of tampering Clause 6.The new requirement for High Security Seals also states that the security seal mustalso be compliant with Clause 6 Evidence of Tampering. Clause 6 requires the manufacturer to have a documented and audited process and test specification inplace in its quality manual for all High Security Seals in its product range.Clause 6 is a valuable addition to the seal standard emphasizing the importanceof continuous improvement of tamper resistance and tamper indicating featureson security seals.If a High Security Seal is only presented toyou with a clause 5 certificate or just a clause 6 certificate then it does nothave the H classification, which means it is not a High Security Seal.The following products are H class Security Seals, 2K Klicker, MCLZ, and BarSeal.Auditing of manufacturers security related business processes Annex A.Poor security related manufacturing practices can undercut the effectiveness of a high quality security seal. ISO 17712s Annex A defines over two dozen requiredpractices, such as facility risk assessments and access controls to production and storage areas. Suppliers conformance with Annex A should also be demonstrated through an independent certification provider that is accredited to audit compliance with the ISO standards.In order to verify that a High Security Seal is certified as ISO 17712 2013, You must contact your security seal supplier and ask them to provide the ISO certificates mentioned below, The manufacturer of the seal has to be ISO 9001 certified.The manufacturer of theseal has to be ISO 17712 2013 Annex A Best Practices certified.The mechanical strength of the seal has to meet or exceed the requirements of ISO 17712 Clause5 High Security Seal category. This is documented by a ISO 17712:2013 Hlaboratory report, certificate for the seal.ISO17712 2013 Clause 6 Tamper Evidence Compliance Letter.The test laboratory performing the strength tests must be ISO 17025 accredited to perform ALL 5 mechanical tests according to ISO17712 2013 Clause 5.

CDG is an ISO 17020-accredited inspection agency & ISO 17025-accredited testing laboratory for ISO 17712 testing & certification.

The lab certification obtained for seals ISO 17712: 2013 specifications must also be supported by the further ISO 9001 certification for the seals manufacturer company, otherwise ISO 17712:2013 is not validated. This is a complete guarantee for the end user.The certification of compliance with ISO 17712: 2013 requirements is granted only if the security seals pass a series of tests, which include physical tests carried out by a laboratory that be certified ISO 17025.

The testing laboratory must be equipped with appropriate machinery to carry out for example tensile test, shear test, bending test and impact test.

Clause 6 Evidence of Tamper

This specific clause requires that seals be designed and constructed with tamper evidence features that generate tell-tale evidence of tamper. The fundamental function of any seal is indicativeness, the ability to reveal evidence after attempts that have been made to tamper with the seal. In practical field applications, this calls for evidence available to visual or other inspection of a seal in situ by a commercial or regulatory person.

This clause also requires that, for high security seals desired to be Clause 6 compliant, the seal manufacturer can demonstrate the tamper evident properties and related documentation to the auditors of a process-review organisation accredited according to ISO/IEC 17020.(like for instance SGS); this shall occur as part of the seal manufacturers ISO 9001 Quality Operational Procedure, in accordance with a number of practices related to security as outlined in the ISO 17712:2013 Annex A. The report of the accredited auditing agency shall address compliance of the manufacturers tamper evidence program, including testing. For ease of use of its customer and regulatory relationships, manufactures may request a summary letter from the auditing agency that certifies such compliance.

HERE IN SUMMARY OF ALL CERTIFICATES THAT ARE NECESSARY to avoid any legal issues related to the use of a seal claiming to be seals ISO 17712: 2013 compliant:

a) Certificate of ISO 17712:2013 compliance (covers the seal), issued by a ISO 17025 accredited testing laboratory;

b) Declaration of an accredited auditing agency that the seal manufacturer performs in accordance with Clause 6 of the ISO 17712: 2013 document;

c) Certificate of ISO 9001 seal manufacturers Quality Operational Procedure

CDG is an independent technical service company and has expert knowledge and experience in providing: inspection & testing services. CDG has been providing inspection services continuously for more than 10 years. Our core values are safety, quality, and integrity. We focus on delivering a total solution to any inspection needs while integrating our services with our customers operations and schedules. Through an independent and objective attitude we strive for customer satisfaction by providing services that not only meet but exceed expectations and international standards. With our expertise, we are more than capable to support our international clients. CDG's philosophy is to provide individual attention to client sand to build long term relationships. We have a small business tradition where our reputation, integrity, quality and service is as important to us as our commercial returns

CDG is an ISO 17020-accredited inspection agency & ISO 17025-accredited testing laboratory for ISO 17712 testing & certification.

WHAT IS ISO 17712? ISO (International Organization for Standardization) is the worlds largest developer of voluntary International Standards. A standard is a document that provides requirements, specifications, guidelines or characteristics that can be used consistently to ensure that materials, products, processes and services are fit for their purpose. ISO International Standards ensure that products and services are safe, reliable, and of good quality.

The ISO 17712 establishes uniform procedures for the classification, acceptance, and withdrawal of mechanical freight container seals. It provides a single source of information on mechanical seals which are acceptable for securing freight containers in international commerce.

ISO STANDARDS FOR SECURITY SEALS

The current ISO 17712 standard requires independent confirmation in three areas:

1. Testing to determine a security seals physical strength (as barriers to entry). ISO 17712 defines three types of classes of seal strength or barrier capacity: I for Indicative; S for Security; and H for High Security. C-TPAT requires the use of H class seals. Suppliers must use independent third-party test laboratories to validate a seals classification. Labs must be accredited according to ISO/IEC 17025 (General requirements for the competence of testing and calibration laboratories) to perform testing specific to ISO 17712.

2. Auditing of manufacturers security-related business processes.

Poor security-related practices can undercut the effectiveness of a high-quality security seal. ISO 17712s Annex A defines over two dozen required practices, such as facility risk assessments and access controls to production and storage areas. Suppliers conformance with Annex A should also be demonstrated through an independent certification provider that is accredited to audit compliance with the ISO standards.

3. Seals be designed and constructed with tamper indicative features that generate tell-tale evidence of tampering.

Security Seal manufacturers must be able to demonstrate to, and obtain certification from, an accredited auditor from an independent third-party organization that their high security seals have built-in tamper evidence features. If an independent third-party organization accredited to ISO 17020 verifies conformity, it will provide the manufacturer with a certificate of compliance that documents that the seals submitted for review do reflect tell-tale evidence of tampering generated by attempts to defeat a correctly closed and affixed seal.

In order to verify that a High Security Seal is certified as ISO 17712:2013, contact your security seal supplier and ask them to submit the ISO certificates mentioned

The manufacturer of the seal has to be ISO 9001 certified.

The manufacturer of the seal has to be ISO 17712:2013 Annex A (Best Practices) certified.

The mechanical strength of the seal has to meet or exceed the requirements of ISO 17712 Clause 5 High Security Seal category. This is documented by an ISO 17712:2013 H laboratory report / certificate for the seal.

CDG provides ISO 17025-accredited ingress protection services in India.

Ingress Protection (IP) Test Certification

CDG can provide Accredited ingress protection Certification.

Ingress Protection forms part of the process of determining the level of protection provided by equipment enclosures. The test methods and definitions of the Ingress Protection (IP) Codes are covered under the EN 60529, EN60598 and EN60079-0 Standards.

The Degree of Protection provided by an enclosure is indicated by the IP coding such as IPXXCH

IP IP is the Code letters

X First Characteristics numeral Dust Protection (numerals 0-6 or latter X)

X Second Characteristics numeral Water Protection (numeral 0-8 or latter X)

C Additional Letter optional, letters A, B, C, D

H Supplementary letters optional, letters H, M, S, W

Applicable Standard: IS/IEC 60529.

First digit: 6Definition: Dust must not enter at all.Test conditions: The test is carried out in a dust chamber in which talcum powder is being kept suspended in the air by means of a dust distributor or similar device. The enclosure which is being tested is placed in the test chamber while a vacuum pump keeps the pressure in the enclosure below the atmospheric pressure of the environment according to the standard.Conditions for acceptance: The protection is satisfactory if there is no visible dust deposit within the enclosure after completion of the test.

Second digit: 8 Definition: Water must not enter in a quantity that could have harmful effects if the enclosure is kept under water under conditions agreed between the manufacturer and the user; however, these must be more difficult than those under . IPX8 Test conditions: The enclosure is completely immersed in a water basin. The immersion depth as well as the test time are dependent on the conditions agreed on between manufacturer and user.In our in-house test laboratory we can test up to a maximum immersion depth of 1.2 metres.Conditions for acceptance: Should water have penetrated, it must not- be present in quantities which impair the good working order of the operating material or represent a safety hazard;- deposit on non-conducting parts where it could lead to creep currents;- come in contact with live parts or coils which are unsuitable for operating in wet conditions;- collect near the wire end or possibly penetrate the wire.

Devices backed by an international standard rating of IP68 are deemed fit enough to withstand dust, dirt and sand, and are resistant to submersion up to a maximum depth of 1.5m underwater for up to thirty minutes.

The Ingress Protection rating (IP Rating) system is a classification system that in a nutshell, provides you with the levels of protection youre receiving from solid objects and liquids. The standard aims to provide users with more detailed information than vague marketing terms such as waterproof.

The basic standards for IP rating are IS/IEC 60529. The standard aims to provide users with more detailed information than vague marketing terms such as waterproof. The first digit represents protection against ingress of solid objects, while the second digit represents protection against ingress of liquids; the higher the value, the greater the protection.

CDG can provide Accredited ingress protection Certification in India and worldwide.

CDG provides ISO 17025-accredited ingress protection services in India.

What is the IP certification?

IP certifications stand for Ingress Protection, or simply put, how well protected a device is against the ingress or entering of solid or liquid particles. While calling particular gadgets water-resistant or waterproof may sound convenient, it may also end up being vague. An official rating standard gives more in-depth context to how much a device can withhold against elements like water or dust.

Once manufacturers and companies receive IP ratings for a product the distribution of product among consumers becomes more smooth and easy. Not only that but in return companies and manufacturers are also able to generate more sales and revenue. With IP rating you are able to offer your consumer a detailed idea about how resistant and enclosed your electrical product is to outside elements like dust and water.

Today various products, mainly smartphones , come across water drop related issues. Not only smartphones but there are various IOT products that need protection against these unintentional contacts. Many times dust and other particles also become the reason behind these risks. Some of the risks include water splash, dust, exposure to rain water and more.

What significance do the numbers hold?

The IPXY numbers mean different standards for both solid and liquid. Here are what the ratings mean for the solid particle protection rating (third character).

1 protected against particles greater than 50mm in size.

2 protected against particles greater than 12.5mm in size (finger-sized objects).

3 protected against particles greater than 2.5mm in size (thick wires).

4 protected against particles greater than 1mm (thin wires, screws).

5 protective against dust particles to a level. Particles may still enter but not in enough quantity to cause significant damage quickly.

6 completely protective against dust particles.

Meanwhile, for liquids, heres what the numbers mean

1 protected against vertically dripping water, with no angled surface or pressure involved, for up to 10 minutes.

2 protected against dripping water on a surface tilted till up to 15-degrees for up to 10 minutes.

3 protected against spraying water at up to 60 degrees, under pressure of 80-100kPa for up to 5 minutes.

4 protected against water splashes from any direction, under pressure of 80-100kPa for up to 5 minutes.

5 protected against water jets sprayed through a nozzle from any direction under pressure of 30kPa at a distance of 3 meters for up to 3 minutes.

6 protected against powerful water jets from any direction with pressure up to 100kPa at a distance of 3 meters for up to 3 minutes.

7 protected against complete immersion of up to 1 meter depth for up to 30 minutes.

8 protected against complete immersion beyond 1 meter depth and up to 3 meters.

Putting the two numbers together, users should get a good idea of how well protected any of their gadgets are against particles. For instance if a device has an IP rating of IP68, you know that the gadget is protected against dust particles completely and can be submerged between 1 and 3 meters underwater.

CDG is an ISO 17020-accredited inspection agency & ISO 17025-accredited testing laboratory for ISO 17712 testing & certification.

ISO 17712 standards

When it comes to mechanical freight container seals, ISO 17712 establishes standard procedures for the classification, acceptance, and withdrawal. Its a one-stop shop for details on mechanical seals approved for use on shipping containers in international trade. ISO 17712, as it is now, calls for third-party verification in three key areas:

Testing to determine a seals physical strength (as barriers to entry).

I for Indicative, S for Security, and H for High Security are the three classes of seal strength or barrier capacity defined by ISO 17712. According to C-TPAT, H class seals are mandatory. When verifying a seals classification, manufacturers are required to engage external, third-party testing facilities. For testing related to ISO 17712, a lab must be accredited in accordance with ISO/IEC 17025 (General standards for the competence of testing and calibration laboratories).

Auditing of manufacturers security-related business processes.

An inadequate security procedure can undermine the benefits of a top-notch security seal. Annex A of ISO 17712 specifies more than two dozen mandatory procedures, including risk assessments and access controls for manufacturing and storage sites. Suppliers must additionally show proof of compliance with Annex A by using a certification body recognized for auditing ISO standards.

Seals be designed and constructed with tamper indicative features that generate tell-tale evidence of tampering.

Manufacturers of high-security seals are required to prove to an impartial third-party auditor and receive certification that their products are tamper-evident. If the seals submitted for review show the telltale evidence of tampering generated by attempts to defeat a correctly closed and affixed seal, the manufacturer will be given a certificate of compliance by the independent third-party organization. This certification must show that the organization is accredited to ISO 17020. Since seals are commonly broken in order to smuggle in illegal goods or steal a container, this is a huge step forward for C-TPAT containers and trailers that require the highest level of protection.

A high-security seal must be placed on all loaded containers destined for the United States, as stated in the C-TPAT security criterion. ISO 17712, the international standard for high-security seals, must be met or exceeded by all seals. It is possible for C-TPAT Partners to use the last of their ISO 17712:2010 high-security seals while they wait for ISO 17712:2013 high-security seals to become available for purchase. When seals can be altered before they are applied and closed, they are far more likely to be breached. Nobody who isnt authorized or properly trained should ever handle a seal. Establishing a seal integrity mechanism between parties helps reduce the likelihood of seals being broken. Prior to installing and closing any seals, they should be verified and inspected according to the VVTT procedure:

V: View seal and container locking mechanisms.

V: Verify seal number for accuracy.

T: Tug on the seal to make sure it is affixed properly.

T: Twist and turn the seal to make sure it does not unscrew.

To ensure compliance with the ISO 17712 standard, there is a need to have third-party verification that a suppliers product and processes are up to par. Partners should inquire from their vendors for copies of relevant compliance certificates, such as those pertaining to product testing and company security procedures.

A lab that has been accredited in accordance with ISO procedures, such as ISO 17025, is the only one to issue certifications attesting to the results of product testing. A third-party testing facility must vouch for the reliability of the test facility.

CDG is an ISO 17020-accredited inspection agency & ISO 17025-accredited testing laboratory for ISO 17712 testing & certification.

REQUIREMENTS OF ISO 17712:2013 STANDARD Security and high-security seals shall be sufficiently durable, strong and reliable so as to prevent accidental breakage and early deterioration (due to weather conditions, chemical action, vibration, shock, etc.) in normal use.

Impact of sand and dust, salt spray, grease, snow, ice and grime can be expected to coat the seal.

Seals shall be identified by unique marks (such as a logotype) and unique numbers that are readily legible; markings intended for unique identification of the seal shall be considered permanent. All seals shall be uniquely numbered and identified. The identity of the manufacturer or private label holder shall be evident on every seal, either name or logo.

Seals meeting the relevant criteria shall be marked or stamped in a readily legible way to identify their classification as indicative (I), security (S), or high-security (H) seals.

Seals intended for use on freight containers moving under customs laws shall be approved or accepted and individually marked as determined by the relevant customs organization or competent authority.

If the seal is to be used by private industry (i.e., a shipper, manufacturer or carrier), it shall be clearly and legibly marked and uniquely numbered and identified. It may also be marked with a company name or logo.

Seals shall be designed and constructed so that tamper attempts create and leave evidence of that tampering. More specifically, seals shall be designed and manufactured to prevent removal or undoing the seal without breaking, or tampering without leaving clear visible evidence, or undetectable re-application of seals designed for single use.

Seals constructed with plastic coating over metal components shall have sufficiently thick metal components so as to preclude removal of the plastic coating, opening of the seal and re-closing of the seal without leaving visual evidence of tampering.

To preclude the simple removal of a bolt seal by pulling the pin head or locking body through a worn container hasp, the minimum diameter (or minimum widest cross dimension) for the metal components of a bolt seal shall be 18 mm.

ISO17712:2013 COMPLIANT HIGH SECURITY SEALS

May 15, 2014, the deadline date for all High Security Seals to be compliant with the new requirements of ISO17712:2013 the international standard for mechanical seals. For seals to be compliant they must be categorized and marked H as High Security Seals when undergoing mechanical testing by an independent ISO 17025 accredited laboratory (Clause 5) and the manufacturer must be certified to both ISO9001 and ISO17712: Annex A.

The new requirement for High Security Seals is that they must also be compliant with Clause 6: Evidence of Tampering. Clause 6 requires the manufacturer to have a documented and audited process and test specification in place in its quality manual for all High Security Seals in its product range. Clause 6 is a valuable addition to the seal standard emphasizing the importance of continuous improvement of tamper resistance and tamper indicating features on security seals.

CDG provides ISO 17025-accredited ingress protection services in India.

IP65 Testing And certification

IP65 Rating / IP65 Certification: The first digit 6 shows complete protection against contact with live or moving parts inside the enclosure and against the ingress of dust. Meaning of second digit 5 already described above.

IP Enclosure Ratings and Standards Explained

The IP rating is also known as Ingress Protection or International Protection ratings which are defined to the international standard of EN 60529, BS EN 60529:1992, IEC 60509:1989. These standards are used to define the levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies such as dirt and water.

The rating consists of the letters IP followed by 2 digits, the first digit stands for the level of protection that the enclosure provides against solid bodies, the second digit describes the degree of protection of the equipment inside the enclosure against water.

IP65 = First Digit - Solids

IP65 = Second Digit - Liquids

Below is easy to follow the chart to help you decide which IP rating / IP Codes you may require for your electrical enclosure, Rainford manufacturers IP rated electrical enclosures including IP54, IP65 up to IP

What is ip65 enclosure?

IP65 Enclosure - IP rated as "dust tight" and protected against water projected from a nozzle. IP66 Enclosure - IP rated as "dust tight" and protected against heavy seas or powerful jets of water. IP 67 Enclosures - IP rated as "dust tight" and protected against immersion. Learn More

Is ip65 waterproof?

Example: With an IP65 rating, the LEDs can be used in an outside setting and are water-resistant but they are not waterproof and are not suitable to be submerged. An IP68 can be submerged in water. Learn more

What are ip65 standards?

At CDG, we utilize the IEC's standardized International Protection Code system for measuring enclosures' capabilities. The IP Code reflects the degree of protection as "IP" followed by two numbers; the first digit shows the extent to which enclosures are protected against particles and protection to others from enclosed hazards. The second digit indicates the extent of protection against water. We carry IP65 enclosures which offer complete protection against particles, and a good level of protection against water. Because all of our enclosures strictly observe the standards, you can expect first-rate and competitively-priced enclosures.

IP65 Enclosures' Characteristics:

Complete protection from dust, oil, and other non-corrosive material

Complete protection from contact with the enclosed equipment

Protection from water, up to water projected by a nozzle against enclosure from any direction

Silk-screening, anodizing, or engraving services available

Custom with cutouts, insulation, hinges, latches or locks

Why choose CDG For IP65 Testing?

CDG is a leading provider of comprehensive testing services for electrical and LED lighting products. Our global network of technical experts, combined with our state of the art testing laboratories, assure a single source solution for meeting all applicable requirements, standards and voluntary schemes. And CDG technical professionals are actively involved in international advisory boards and standards development activities, ensuring the most up to date knowledge of current and changing requirements.

CDG provides ISO 17025-accredited ingress protection services in India.

IP67 equipment is the most commonly found in the connectivity market. It is 100% protected against solid objects like dust and sand, and it has been tested to work for at least 30 minutes while under 15cm to 1m of water.

Ingress Protection Testing

Ingress Protection testing, or IP testing, tests a products ability to protect against ingress, that is, the infiltration of water, dust and foreign objects. Evaluate the Degree of Protection Provided by a Products Enclosure with Ingress Testing from CDG. CDG is a leading Ingress Protection Testing company in India, contact us for Ingress Protection Testing Services.

First digit: 6Definition: Dust must not enter at all.Test conditions: The test is carried out in a dust chamber in which talcum powder is being kept suspended in the air by means of a dust distributor or similar device. The enclosure which is being tested is placed in the test chamber while a vacuum pump keeps the pressure in the enclosure below the atmospheric pressure of the environment according to the standard.Conditions for acceptance: The protection is satisfactory if there is no visible dust deposit within the enclosure after completion of the test.

Second digit: 7Definition: Water must not be allowed to enter in a quantity which causes damage when the enclosure is temporarily under water. IP X7Test conditions: In the test, the enclosure is completely immersed in water in a dip tank. Immersion depth: 1 meter; test time: 30min.Conditions for acceptance: Should water have penetrated, it must not

- be present in quantities which impair the good working order of the operating material or represent a safety hazard;- deposit on non-conducting parts where it could lead to creep currents;- come in contact with live parts or coils which are unsuitable for operating in wet conditions;- collect near the wire end or possibly penetrate the wire.

Different IP Ratings

The rating consists of the letters IP followed by two digits, the higher the number the better the protection. The first digit indicates the level of protection that the enclosure provides against the ingress of solid foreign objects while the second digit defines the protection of the equipment inside the enclosure against various forms of moisture (drips, sprays, submersion, etc).

How to get IP testing certificate?

To get an IP rating for your product, you need to provide a product sample for testing. CDG will conduct independent testing & assessment of your product. After testing & assessment, we give the product a numerical IP rating, based on the tests we have put it through.

The value of trusting CDG with your Ingress Protection (IP) testing is clear. Working with our leading Engaged Experts and an unrivalled portfolio of testing operations and capacities enables our clients to validate certainty in their products and confidence to go to market quickly and safely, working with a global single source partner.

CDG provides ISO 17025-accredited ingress protection services in India.

IP54 Rating / IP54 Certification: Fist digit (5) shows complete protection against contact with live or moving parts inside the enclosure. Protection against harmful deposits of dust. The ingress of dust is not totally prevented, but cannot enter in an amount sufficient to interfere with satisfactory operation of the machine. Second digit (4) shows that Water projected by a nozzle against the enclosure from any direction shall have no harmful effect.

Ingress Protection testing, or IP testing, tests a products ability to protect against ingress, that is, the infiltration of water, dust and foreign objects. Evaluate the Degree of Protection Provided by a Products Enclosure with Ingress Testing from CDG. CDG is a leading Ingress Protection Testing company in India, contact us for Ingress Protection Testing Services.

The first digit of the IP code indicates the degree that persons are protected against contact with moving parts (other than smooth rotating shafts, etc.) and the degree that equipment is protected against solid foreign bodies intruding into an enclosure.

Drip Box The drip box is for IPX1 and IPX2 drip test. The drip box size is 800x800x75mm (LxWxH). The diameter of drip hole is 0.4mm. The distance between drip holes is 20mm. The sample can be over 150kg.

Swing Pipe Water Spray Test Equipment: It is for IPX3 and IPX4 waterproof test. The semi-diameter of swing pipe is 1meter (Any other size is also available). The inside diameter of the swing pipe is 15mm. The sample rotating table diameter is 1000mm (Or other size according to the diameter of the swing pipe), and the height is adjustable. The rotation speed is 15rpm which controlled by PLC panel.

Waterproof Jet Test Device: With water supply device size is 1000x1000x600mm, the nozzle diameter is ??6.3mm (IPX5 waterproof test) and ??12.5mm (IPX6 waterproof test). The water speed is 12.5 0.626L/min for IPX55 and 100 5L/min for IPX6

Immersion tank Waterproof test Device : It is for IPX7 waterproof test. The water tank size is 1000x1000x1200mm (Other size can be designed according to your request). It can test samples up to 120kg.

Immersion tank Waterproof test Device : It is for IPX8 test. It can simulate a water depth of 050m. The water immersion tank diameter is 600mm and the height is 1200mm. The compressive stress is 10 atmospheres or design according to customers request.

EN 60529 outlines an international classification system for the sealing effectiveness of enclosures of electrical equipment against the intrusion into the equipment of foreign bodies (i.e. tools, dust, fingers) and moisture.

We are a leading IP rating service provider in India. Contact us for all your needs related to 'Ingress Protection Marking' in India.

CDG is a pioneer company for IP Rating / IP certification. We certify for following levels of IP ratings : IP69k Certification, IP68 Certification, IP67 Certification, IP66 Certification, IP65 Certification, IP64 Certification, IP58 Certification, IP57 Certification, IP56 Certification, IP55 Certification, IP54 Certification

General requirements for seals specified by ISO 17712

ISO 17712 requires that all security seals have the following general features:

Security seals must be unique, difficult to imitate and be marked with the corresponding information.

The design should be easy to inspect and to determine whether it is being used properly or its application is defective. No room must be left for doubt.

Security bolt seals must be at least 18 millimetres in diameter.

They are single use devices: by removing them, the seals must be destroyed and become unusable. They have to show clear proof in case of inviolability.

They must meet the thresholds of strength specified by the standard and pass all the tests to which they are submitted at the accredited bodies.

Three types of seals allowed by ISO 17712

ISO 17712 defines the various types of certified cargo container seals. There are three of these:

1. Indicating seals

They are plastic or metallic seals that are easy to open after they are fitted. As container seals, this type is used on empty containers which have to be moved over short distances, for example, in the same city. These seals ensure that the container is clean and suitable for loading. Of course, the indicating security seals must bear the regulatory marking including the numbering and the logo of the company.

2. Security seals

Security seal with metallic cable F-150Locking this type of seal already provides greater security, in order to prevent the unauthorized opening of cargo containers. The difference between this category of seals and the next is that security in this case is more restricted. In any case, if a seal has been broken, it must be evident during an inspection. They are also marked with numerical information and the logo.

3. High security seals

Clik-Lok high security sealThey are made of extremely strong materials such as metal, or they incorporate steel cable. The ultimate purpose of this type of seals is to prevent and hinder at all costs any attempt to open or tamper with them. In addition, advanced special tools are needed for its removal. The most commonly used type of marking for these seals is by laser, due to its excellent resistance to environmental aggression. The letter “H” (from High Security Seals) defines the classification of this type of seal.

Mechanical strength tests in ISO 17712

Security seals certified in accordance with the standard must comply with specific tests in relation to tensile, cutting and impact strength. These tests must be carried out in institutions accredited by the regulations. Let us see in detail what they consist of:

Tensile strength: defines the strength of the security mechanism, which must be greater than 1, 000 kg. It consists of pulling the ends until they eventual separate.

Cutting: both in security bolt seals and those with metal cables, the cutting strength must be greater than 340 kg.

Lateral impact: this test consists of striking the security bolt seal perpendicularly in an attempt to break it. Tests the flexibility of the seal shaft and its ability to bend.

Vertical impact: in this case, the impact may come from any angle until the seal is broken.

What is IP rating? 

The term IP stands for international or ingress protection marking that reflects the degree of protection a product holds. It was drawn up by the International Electrochemical Commission (ICE) to help consumers select the best and quality assured product. IP rating is followed by two nombre where the first digital helps consumers to determine the extent to which the product is protected against different particles and hazards. Whereas the second number displays the protection of the product against liquid products. 

Importance of IP rating

By getting the IP rating for your product you are able to highlight the level of protection your product holds against solid and liquid elements. This way consumers are able to determine whether the product they are buying meets their expectations or not. Apart from that, users buying the product are well aware of the protective measure so that they are able to work more safely without damaging the product.

If a product is certified with IP68 rating then it means one can easily drop his/her smartphone in the freshwater. Whereas if the phone is droppers in the ocean or chlorinated water then it can cause problems. Whereas if the particular product is having IP67 rating then it indicated that the product is dust tight and can survive upto one metre of water for not more than 30 minutes. 

Today consumers are educated enough to differentiate between various types of IP rating and so that they get the best product. If your product has an IP rating of 67 or 68 then it will not only make your product the first choice of consumers but they are likely to make the final purchase of your product. 

Many products undergo a variety of tests before they reach the market. These tests include product safety testing, electromagnetic compatibility, vibration testing and many others. Ingress Protection testing, or IP testing, tests a product’s ability to protect against “ingress, ” that is, the infiltration of water, dust and foreign objects.

Why hire CDG For IP rating?

When a company or a manufacturer plans to get an IP rating for their product then they need to get it tested by a certified or independent company. The company put the product into test testing then assigned the numerical rating that signifies how well the product is protected from the solid and liquid. If you are looking to get the IP rating for the product then you need to look for professionals that can help you with that. 

CDG is one of the leading IP rating service providers helping manufacturers and businesses across different countries to get IP rating for their product. No matter whether you are starting new or planning to launch a new product. You can always reach out to our highly experienced professional that will help you to get the IP rating as soon as possible. Our highly experienced technical experts will not only help you with the documentation but will also help you with designing your product so that it meets your requirements. So if you are looking to get IP rating for your product then you can always reach out to us.