IP67 Certification in India

CDG provides ISO 17025-accredited ingress protection services in India. 

IP67 equipment is the most commonly found in the connectivity market.  It is 100% protected against solid objects like dust and sand, and it has been tested to work for at least 30 minutes while under 15cm to 1m of water. 

Ingress Protection Testing

Ingress Protection testing, or IP testing, tests a product’s ability to protect against “ingress,” that is, the infiltration of water, dust and foreign objects. Evaluate the Degree of Protection Provided by a Product’s Enclosure with Ingress Testing from CDG. CDG is a leading ‘Ingress Protection Testing’ company in India, contact us for ‘Ingress Protection Testing Services’.

First digit: 6Definition: Dust must not enter at all.Test conditions: The test is carried out in a dust chamber in which talcum powder is being kept suspended in the air by means of a dust distributor or similar device. The enclosure which is being tested is placed in the test chamber while a vacuum pump keeps the pressure in the enclosure below the atmospheric pressure of the environment according to the standard.Conditions for acceptance: The protection is satisfactory if there is no visible dust deposit within the enclosure after completion of the test.

Second digit: 7Definition: Water must not be allowed to enter in a quantity which causes damage when the enclosure is temporarily under water. IP X7Test conditions: In the test, the enclosure is completely immersed in water in a dip tank. Immersion depth: 1 meter; test time: 30min.Conditions for acceptance: Should water have penetrated, it must not

- be present in quantities which impair the good working order of the operating material or represent a safety hazard;- deposit on non-conducting parts where it could lead to creep currents;- come in contact with live parts or coils which are unsuitable for operating in wet conditions;- collect near the wire end or possibly penetrate the wire.

Different IP Ratings

The rating consists of the letters IP followed by two digits, the higher the number the better the protection. The first digit indicates the level of protection that the enclosure provides against the ingress of solid foreign objects while the second digit defines the protection of the equipment inside the enclosure against various forms of moisture (drips, sprays, submersion, etc).

How to get IP testing certificate?

To get an IP rating for your product, you need to provide a product sample for testing. CDG will conduct independent testing & assessment of your product. After testing & assessment, we give the product a numerical IP rating, based on the tests we have put it through.

The value of trusting CDG with your Ingress Protection (IP) testing is clear. Working with our leading Engaged Experts and an unrivalled portfolio of testing operations and capacities enables our clients to validate certainty in their products and confidence to go to market quickly and safely, working with a global single source partner.