Mumbai, Maharashtra, India
Our Products
Centurys Pump-type Metal Marker is unique marking device for permanent & fade-proof marking on any surface. Its an industrial grade ball-point marker which are bright, opaque & weather-proof. It has a rigid aluminum body making it difficult to break, puncture or leak. It also has a rubber valve at the bottom for smooth ink flow. When the valve is pumped it compresses ink towards a fine ball point for smooth flow and easy writing.
The markings made by the marker wont chip/peel/fade or rub off and it can withstand heat and weathering under adverse conditions. It has special viscous ink formulation similar to paint which remains permanent on steel, alloys, metals, concrete, glass, rubber, wood & even plastics. It can mark on wet, dry, dusty, oily, greasy & even extremely rough surfaces with ease.
Centurys Tex Marker is a collapsible aluminum writing device filled with ink used for marking on fabric samples for identification. It is used by textile mills & processing houses before dyeing and finishing processes of grey fabric for identification, quality control, shrinkage, pilferage etc. The marking remain permanent, bright & opaque even after the dyeing & finishing processes are completed. It is widely used in textile industry for dyeing, bleaching, hosiery, knitting, scouring & weaving processes.
Centurys Everon Marker is a unique marking device used in textile mills & factories for permanent marking on gray cloth & fabrics. It has a rigid aluminum body making it difficult to break, puncture or leak. It also has a rubber valve at the bottom for smooth ink flow. When the valve is pumped it compresses ink towards a fine ball point for smooth flow and easy writing. It is also known as 'pump-type marker' or 'TEXPEN. The viscous ink makes permanent, bright & opaque markings on all kinds of fabrics and remains visible even after the dyeing & other finishing processes. It works on all kinds of fabrics like cotton, denim, polyester, wool, silk, linen etc. It is widely used in dyeing houses & textile mills in processes like dyeing, scouring, bleaching, hosiery, knitting & weaving.
Everon Marker is designed whereby it can be used up to last drop of ink when compared to traditional tube type markers where almost 20% of ink goes waste or we are unable to use after squeezing, as it is difficult to even hold the tube.
Centurys Fine-tip metal marker is a permanent marker for making bright, opaque and fades proof markings on any surface. The unique stainless steel fine tip makes it very easy to mark on smaller objects & places which are difficult to mark with regular broad tip markers. The marker has a hard aluminum body filled with ink & a rubber valve at the bottom, when pumped slightly pushes ink towards a fine ball point for sharp markings. The markings made by the marker wont chip/peel/fade or rub off and it can withstand heat and weathering under adverse conditions. It has special viscous ink formulation similar to paint which remains permanent on steel, alloys, metals, concrete, glass, rubber, wood & even plastics. It can mark on wet, dry, dusty, oily, greasy & even extremely rough surfaces with ease.
Century's High temperature marker is an industrial grade valve action paint marker for any surface. The ink is formulated specially for marking surfaces & objects that are exposed to very high temperature & harsh environments. It is made up of a hard aluminum body filled with ink and felt-tip with valve action for smooth ink flow. The markings have to be made at room temperature & works on all kinds of surfaces including steel, metals, ceramic, glass, rubber, concrete, alloys, wood etc. The markings made by the marker remain permanent at high temperatures up to 500-1093 degrees Celsius (930-2000 F) depending on the colour. The marker works on all porous & non-porous surfaces including metal, glass, ceramic, wood, plastic, rough, smooth etc. Ideal for Iron & steel, Automobile, Welding, Ceramic & Glass manufacturers.
Century's UV Security Marker is a felt tip paint marker with applications in wide range of industries including hospitality industry, hotel industry, manufacturing, security etc. Its marking are not visible in normal light & only visible in black light or 'UV light'. It is made up of a hard aluminum body filled with ink and felt-tip with valve action for smooth ink flow. It is used in hotels & hospitals for quality checks and security markings. It is also used in manufacturing units, automobile industry, event industry, repair workshops, laundry, clubs, army etc. The markings made by the marker are permanent & weather-proof. It works on all porous & non-porous surfaces including metal, plastic, glass, ceramic, rubber and stone. The ink is xylene free. It is also known as invisible marker as the markings are not visible under normal daylight. The marker is very popular in Europe & America and widely used across all kind of sectors.
Centurys Bleed Thru Marker is a permanent industrial grade valve action paint marker for construction purpose. The unique ink formulation enables the markings to bleed thru and be visible even after painting over the surface that has been marked. It is made up of a hard aluminum body filled with ink and felt-tip with valve action for smooth ink flow. It works on all surfaces like metals, concrete, iron, alloys, plastic, glass etc. The marker is available in two types for oil based primers and water based primers. It is widely used in construction industry, ship building and bridge fabrication on metals & alloys for Used for inspection, coding, layout or assembly operations.
Centurys Bottle Paint Marker is a refillable marker with roller ball point tip & permanent ink. It is made of hard plastic shell bottle with stainless steel tip which when squeezed pushes the ink towards the tip for ink flow. It makes bright, permanent & opaque markings on all kinds of surfaces. It even works on oily, greasy & wet surfaces which are difficult to mark with regular paint markers. The markings made by the marker wont chip/peel/fade or rub off and it can withstand heat and weathering under adverse conditions. It has special viscous ink formulation similar to paint which remains permanent on steel, alloys, metals, concrete, glass, rubber, wood & even plastics. It is ideal for industries where the markers are used in bulk quantity as its very cost effective.
Centurys Stainless Steel Marker is an industrial grade valve action paint marker for all surfaces. It is made up of an aluminum body filled with ink & a felt-tip with valve action for smooth ink flow. The ink has very few traces of chloride, sulphur, low melting metals & halogens which wont contaminate or scath the surface being marked. The ink formulation meets or exceeds the specifications for GE Nuclear Energy, GE Aircraft Engines and the US Energy Research and Development Administration (nuclear grade). It can mark on all surfaces including metal, plastics, steel, ceramic, glass, concrete etc. The markings do not fade or remove under adverse weather conditions & heat too. It is ideal for welding, aircraft industries, marine industries, power plants, automotive plants, and oil and natural gas refineries.
