Heat Exchangers #48072

Heat Exchanger us are as per the Client's Specifications and Drawings confirming to ASME Sect. VIII & TEMA. Stage-wise & Final Inspection of the Fabricated Equipments has been carried out by Client's own Inspection Wing or Third Party Inspection Agency deputed by them.Client gives us the Thermal Design Parameters of the Fluids on both the sides. Based on the nature of the fluids, first of all appropriate MOC is selected. Again Based on the nature of fluids appropriate type of Heat Exchanger is selected. After the initial confirmation on the above from client, thermal design is carried out on internationally reputed softwares like HTRIHTFS. The Heat Exchangers is optimized within the allowed parameters of Pressure Drop, using the allowed values of Fouling Factors, Fluid Velocity etc.

Heat Exchanger For VAM Machine are used for Heat Exchange between Lithium Bromide Solution of different concentration during the Operation of the VAM Machine

We are a well-known Manufacturer, Exporter & Supplier of U Tube Bundle Heat Exchanger. Inter  Fitment being a crucial point, we manufacture U Tube Bundle Heat Exchanger either as per the specifications laid by the customers or we send our engineers to take the actual dimension of the existing Tube Bundle and the Shell. For the making of U Tube Bundle Heat Exchanger, we have a set of fixtures for 3/2" & 1" OD Tubes. The minimum Bending Radius carried out by us so far is 1.5D. U Tubes manufactured by us meet the TEMA Acceptance Norms of 16 % thinning & 10 % Ovality. The U Tube Bundle Heat Exchanger is generally used for Inter-Coolers, Re-Boilers, Oil Coolers, Strippers, etc. Note : If Client gives us the Existing/Dummy Shell for the testing purpose then Existing/Dummy Shell is used or else Dummy Shell is fabricated for the same and supplied along with Tube Bundle after carrying out the testing.

We carry out thermal, mechanical design and then manufacture the entire ranges of Inter-Coolers & After-Coolers suitable for Compressors manufactured by MS Ingersoll Rand, Kirlokskar, Khosla, Chicago Puematic, Atlas Copco etc for their different capacities Compressors. These Coolers are manufactured as per the codes specified by the customer like TEMA RCB and ASME Codes.

We are a credible Manufacturer, Exporter & Supplier of Intercooler Heat Exchanger. The air that gets heated up at various stages of compression is cooled by the Intercooler Heat Exchanger. The Intercooler Heat Exchanger we offer is suitable for compressors manufactured by M/S Ingersoll Rand, Kirlokskar, Khosla, Chicago Puematic, Atlas Copco, etc. We manufacture the Intercooler Heat Exchanger using Carbon Steel and Copper/Stainless Steel/Admiralty/Cupro-Nickel (90:10)/Cupro-Nickel(70:30) tubes depending upon the type of cooling water available, as per codes laid by clients such as TEMA RCB and ASME Codes.