Our Products
We supply and install Gas Pipelines and Tubing with fittings and fixtures and also orbital welding as required. We design, fabricate and commission the system, for various laboratories. We take up turnkey projects.
Contact us with your specific needs, we provide all types of combinations
+91-9945075154
alroysge@gmail.com
While handling various chemicals in laboratory, it is absolutely necessary to protect laboratory personnel and surrounding from vapors and gases beyond permissible limit. Scientific Fume Chambers being used with proper extractor and flow control mechanism to serve the purpose. We supple various types of fume chambers depending on the chemical used and detailed application.
Contact us with your specific needs, we provide all types of combinations
+91-9945075154
alroysge@gmail.com
Carrier Gases in laboratory are connected with Gas Purification Panel for reduction of impurities particularly Oxygen, Moisture & Hydrocarbon. The Regulator, Pressure Gauge and Valves (toggle) are connected in the Purification Panel for controlling the gas flow into the system. Various combinations of Oxy-Trap, HC-Trap and Moisture Trap are available.
Contact us with your specific needs, we provide all types of combinations
+91-9945075154
alroysge@gmail.com
While using toxic, flammable and hazardous gases in any system, it is essential to check any leakage in the system for safe handling and ensuring the safety of personnel in the Laboratory and the environment. Leak Detectors which are fitted with specific sensors are used to detect any leakage in the system. In case of any leakage developed, one gets alert through audio as well indication light. System can be synchronized to shuts off the gas line through solenoid valve, the moment leakage occurs. Usually detectors are set below LEL (Lower Explosive Limit). So that it is handled in a safe manner. For various gases, separate detectors are available.
Contact us with your specific needs, we provide all types of combinations
+91-9945075154
alroysge@gmail.com
Manifold is the first step for the Gas Distribution System. There are different types of manifolds like Cylinder Mount, Single Cylinder Manifold, 2-CylinderManifold, Multiple Cylinders Manifold & Gas Bank. Usually change-over systems are connected with manifold. We design and fabricate as per requirement. For trouble-free & steady flow of gases, instead of rigid tube connecting cylinder to Manifold, Stainless Steel braided High Pressure Flexible Hose with the safety rope and spring is recommended. We supply different qualities, sizes and fittings depending on Service & application.
Contact us with your specific needs, we provide all types of combinations
+91-9945075154
alroysge@gmail.com
Gas Flow Meter is used to regulate the flow of gas in to the system. Different types of flow meters are available depending on service, flow range and list count. Depending on application – Rota meter, Mass flow meter or Mass flow controllers are selected for the optimum result.
Contact us with your specific needs, we provide all types of combinations
+91-9945075154
alroysge@gmail.com
Gas Pressure Regulator - an essential tool for gas handling system - is a device to control ‘downstream pressure’ from ‘upstream source’ in line with required working pressure that allows optimum gas to flow into the system. To use in Specialty Gases, the regulator must be made with stainless steel or chrome-plated brass depending on the purity level and corrosiveness of the pure gas or gas mixture. For Specialty gas Application Pressure Regulator are fitted with stainless steel diaphragm and mechanically linked to the poppet assembly to provide sealing integrity. Apart from being a high sensitive control device proper sealing diaphragm also prevents the diffusion of atmospheric oxygen into the carrier gases. For Pressure control either stainless steel Diaphragm (for low and medium pressure at downstream) or stainless steel Piston (for high downstream pressure) being used. Reduction of pressure in the regulator can be done either in single stage (one step Reduction) or in Double stage (Reduction in two steps). Inlet Pressure gauge indicates cylinder pressure or the source pressure. Outlet Pressure gauge indicates the pressure at which it is being delivered in the system.
How do you order for a Pressure Regulator? – There are two ways
We are given below a chart as a guide for selection of regulators. In case all parameters are not known to the user, at least working pressure, gas service and mounting can be intimated to us so that we can decide on the model and supply suitable regulator.
Contact us with your specific needs, we provide all types of combinations
+91-9945075154
alroysge@gmail.com
Regular Selection Guide
Body & Stages(A) | Pressure Reducing Method(B) | Upstream Pressure gauge Range(C) | Delivery Pressure gauge Range(D) | Inlet Connection(F) | Outlet Connection(G) |
Single Stage Chrome plated Brass A1 | Diaphragm(SS 316) D | 0-300 bar(0-4500 psi)C1 | 0-17m bar (0-25psi) D1 | 5/8" BSP RH F1 | 1/4" Nut Ferrule G1 |
Single Stage Stainless Steel 304 A2 | Piston P | 0-280 bar(0-4000 psi)C2 | 0-2.1 bar (0-30psi)D2 | 5/8" BSP LH F2 | 1/2" Nut Ferrule G2 |
- | - | 0-7 bar (0-100 psi)D3 | - | - | |
Single Stage Stainless Steel 316 A3 | - | 0-125 bar (0-1781 psi) C3 | 0-16 bar(0-230psi) D4 | 1/4" FNPT F3 | 4mm-12mm Push Fit G3 1/4" |
Double Stage Chrome plated Brass A4 | 0-40 bar(0-570 psi) C4 | 0-10 bar (0-150 psi) D5 | 1/2" FNPT F4 | 1/4" FNPT F3 | 1/4" MBSP/NPT G4 1/2" |
Double Stage Stainless Steel 304 A5 | - | 0-16 bar(0-300 psi)C5 | 0-100 bar (0-1500psi)D6 | 1" FNPT F5 | MBSP/NPT G5 |
Double Stage Stainless Steel 316 A6 | - | 0-7 bar(0-100 psi)C6 | 0-150 bar(0-2100) D7 | - | - |
To move cylinders from one place to other place, cylinder trolleys are being used. Specific trolleys for different sizes of cylinders are available. We make single cylinder trolleys and double cylinder trolleys having different combination of wheels. We also manufacture Step Trolleys to move the cylinder through staircases reaching to different floors.
Contact us with your specific needs, we provide all types of combinations
+91-9945075154
alroysge@gmail.com
Whether any particular gas is being distributed to various points of usage or various gases are being channelized into one system in the laboratory, proper gas distribution system is very essential for the right result. We design gas distribution systems on the basis of various parameters essentially required for the application.
Contact us with your specific needs, we provide all types of combinations
+91-9945075154
alroysge@gmail.com
CHEMIX Gas Cabinets & Panels are designed to dispense gases in a controlled manner to a given process and protect the surrounding from exposure to gases & chemicals. Any industry using or processing hazardous gases should consider these products. We design Gas Cabinet and control panes thereof on the basis of physical properties of the gases, cylinder size, pressure and flow required for the process and flow required for the process including precautions related to safety and hazards.
Contact us with your specific needs, we provide all types of combinations
+91-9945075154
alroysge@gmail.com
Our range of generators includes Cryogenic, Adsorption & Membrane technologies to meet all typical flow pressure & purity requirements of on-site gas generation. We supply Gas Generators for analytical instrumentation including Hydrogen Generators for fuel and carrier gas, Nitrogen Generators, Makeup Gas Generators, GC Gas Stations, FID Gas Stations, FT-IR Purge Gas Generators, LCMS Tri-Gas Generators, TOC Gas Generators and ultra-dry Air Generators.
Contact us with your specific needs, we provide all types of combinations
+91-9945075154
alroysge@gmail.com
For Trouble-free & steady flow of gases, instead of rigid tube connecting cylinder to Manifold, Stainless Steel braided High Pressure Flexible Hose with the safety rope and spring is recommended. We supply different qualities, sizes and fittings depending on service & application.
Contact us with your specific needs, we provide all types of combinations
+91-9945075154
alroysge@gmail.com
In continuation with the details mentioned in the Gas Pressure Regulator, we here by mention the Specific Regulator at the point of usage in a laboratory. Gas supplied from the gas manifold system through the pipelines and tubing reaches the laboratory at particular pressure for which a control mechanism is needed to drop down the pressure at which gas passes into number of different instruments from the same source at different pressures as required by the application. Point-of-Use regulator is set at particular downstream pressure for steady and uninterrupted flow.
Contact us with your specific needs, we provide all types of combinations
+91-9945075154
alroysge@gmail.com