Bangalore, Karnataka, India
GST : 29AHHPR8177M1ZA
Verified
Add Review
Our Products
Whether you require a Process Gas Mixture or a High Accuracy Calibration Gas Mixture for an analytical application, you can be sure that CHEMIX has the capability and expertise to meet your needs. Here we present a list of pure gases which are our input ingredient. A wide range of customized gas mixtures can be supplied as required. Gas and liquid mixtures are manufactured with in the limit of physics and chemistry from amongst the chemicals listed below.
List Of Raw Materials To Make Gas Mixture
| Acetaldehyde | Cis-2-Butene | Ethyl Methyl Ether | LPG | Nitrogen | R134A |
| Acetone | Cis-2-Pentene | Ethylene | MEK | Nitrogen Dioxide | R600 |
| Acetonitrile | CIO2 | Fluorine | Methane | Nitrous Oxide | R744 |
| Acetylene | Cyclo Butane | Formal dehyde | Methanol | Nonane | RH |
| Ammonia | Cyclo Hexane | HBr | Methyl Acetylene | NOX | Silane |
| Argon | Cyclo Pentene | HCFC | Methyl Cyclo Hexane | Oxygen | Sulfur Dioxide |
| Arsine | Cyclo Propane | HCL | Methyl Pentane | 1-Octene | Sulfur Hexafluoride |
| BF3 | Deuterium | Helium | Methyl-cyclo-Pentane | 2-Octene | Ter-Butyl Methyl Ether |
| Benzene | Diborane | HF | Moisture | n-Octane | Toluene |
| 1,2 Butadiene | n-Decane | Hydrogen | 1-Methyl-2-Pyrrolidinone | PH3 | Trans-2-Butene |
| 1,3 Butadiene | Di Ethyl Ether(DEE) | Hydrogen Sulphide | 2-Methyl-1-Butane | Propane | Trans-2-Pentene |
| 1-Butene | Di methyl Ether(DME) | 1-Hexene | 2-Methyl-1-Butane | Propylene | Tri methyl amine |
| n-Butane | Di methyl amine | n-Heptane | 2-Methyl-1-Pentene | Propyne | Vinyl Acetylene |
| 1-Butyne | Ethane | n-Hexane | 2-Methyl-2-Butene | n-Pentane | Xenon |
| Carbon Dioxide | Ethanol | Iso butane | 3-Methyl Pentane | 1,2 Propadiene | Xylene |
| Carbon Disulfide | Ethlene Oxide | Iso Butylene | 3-Methyl-1-Butene | 1,3 Propadiene | m-Xylene |
| Carbon Monoxide | Ethyl Acetate | Iso Hexane | Neon Pentane | 1-Pentene | O-Xylene |
| Carbonyl Sulfide | Ethyl Acetylene | ISO Pentane | Neon | 2-Pentene | P-Xylene |
| Chlorine | Ethyl Benzene | Krypton | Nitric Oxide | R1270 | Zero Air |
A gas reference material manufactured by a commercial gas supplier but certified by NIST. NIST gas standards are equivalent to SRMs and are used to analyze and certify commercial gas mixtures, such as US EPA protocols.
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
We are prominently engaged in catering the clients with a wide assortment ofHigh Purity Argon Gas. Our offered gases are commonly used in the places where thermal conductivity is required and nitrogen is non reactive or less in quantity. We use sealed metal cylinders which have safety valve guards & hydro test rings to pack these gases for ensuring their safety and less wastage during transportation. These gases are extensively used in varied industries like pharmaceutical, chemical, engineering and other contractor industries.
We are a renowned Calibration Gas mixture manufacturer, supplier and exporters in India. We provide these Calibration Gas Mixtures in Percentage, PPM (Parts per Million) and PPB (Parts per Billion) range. Calibration Gas is a mixture of two or more gases blended together along with a carrier gas, and is used as a reference gas to calibrate various analytical instruments, gas analyzers and gas detectors of a laboratory or research center. The good / accurate calibration gas must always be accompanied by traceability. Traceability is comparison/deviation to national or international standard. Also, PTL (Preparation Tolerance Level) and CA (Certification Accuracy) plays a major role in providing an accurate calibration Gas mixture. Accuracy in all respect is a necessity for any Calibration gas mixture because based on this reference gas mixture only, various analytical instruments gets calibrated which in turn are further used to detect various components in air or any chemical. Calibration Gas Mixture can be supplied in carbon alloy steel cylinders or aluminum cylinders.
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
Our Product List Contains 284 Different Compositions Of 2-Component Gas Mixtures. Few Examples Listed Below
| ACETALDEHYDE | CARBON DIOXIDE | ||
| 100 PPB – 1000 PPB + Nitrogen | CGM02924710 | 1PPM-999PPM + Air | CGM02116810 |
| 0.1PPM – 10 PPM + Nitrogen | CGM02924720 | 0.1%-30% + Air | CGM02116820 |
| ACETYLENE | 1ppm-999ppm + Argon | CGN02110410 | |
| 1ppm-50 ppm + Helium | CGM02022510 | 0.1%-30% + Argon | CGM02110420 |
| 0.1% -1% + Helium | CGM02022520 | 1ppm-999ppm + Nitrogen | CGM02114710 |
| 0.1%-1.0% + Nitrogen | CGM02024710 | 0.1% - 30% + Nitrogen | CGM02114720 |
| AMMONIA | CARBON MONOXIDE | ||
| 50PPM-999PPM + Argon | CGM02030410 | 1ppm-50ppm + Air | CGM02126810 |
| 0.1%-3.0% + Argon | CGM02030420 | 1.1%-6% + Air | CGM02126820 |
| 1ppm-999ppm + Nitrogen | CGM02034710 | 1ppm-999ppm + Helium | CGM02122510 |
| 1000 ppm-1.0% + Nitrogen | CGM02034720 | 1ppm-999ppm + Argon | CGM02120410 |
| 1%-10% + Nitrogen | CGM02034730 | 1%-50% + Argon | CGM02120420 |
| ARGON | CHLORINE | ||
| 50ppm-999ppm + Helium | CGM02042510 | 1ppm-50ppm + Nitrogen | CGM02834710 |
| 0.1%-50% + Helium | CGM02042520 | 50ppm-1000ppm + Nitrogen | CGM02834720 |
| 50ppm-999 ppm + Hydrogen | CGM02042910 | ETHANE | |
| 0.1%-49% + Hydrogen | CGM02042920 | 1PPM-999 PPM + Air | CGM02196810 |
| 50PPM-999 PPM + Nitrogen | CGM02044710 | 0.1%-1.5% + Air | CGM02196820 |
| 0.1%-49% + Nitrogen | CGM02044720 | 1ppm-999ppm + Nitrogen | CGM02194710 |
| BENZENE | 15% + Nitrogen | CGM02194720 | |
| 10ppb-1000ppb + Air | CGM02056810 | ETHYLENE | |
| 1000 ppb – 10 ppm + Air | CGM02056820 | 1PPM-999PPM + Air | CGM02236810 |
| 10ppm-500 ppm + Nitrogen | CGM02054710 | 0.1%-1% + Air | CGM02236820 |
| n-BUTANE | 1ppm-999ppm + Nitrogen | CGM02234710 | |
| 1ppm-49 ppm + Air | CGM02086810 | 1%-20 % + Nitrogen | CGM02234720 |
| 50ppm -0.9% + Air | CGM02086820 | HELIUM | |
| 1ppm-49ppm + Nitrogen | CGM02084710 | 10%-50% + Air | CGM02256810 |
| 1%-5% + Helium | CGM02082510 | 10ppm-999ppm + Argon | CGM02250410 |
| 5%-65% + Prapane | CGM02085910 | 0.1%-50% + Argon | CGM02250420 |
| Iso BUTANE | 1ppm-999 ppm + Nitrogen | CGM02254710 | |
| 1ppm-999ppm + Helium | CGM02312510 | 0.1%-50% + Nitrogen | CGM02254720 |
| 5%-45% + Propane | CGM02315910 | 5%-15% + Oxygen | CGM02255410 |
| 1ppm-999ppm + Nitrogen | CGM02314710 | HYDROGEN SULPHIDE | - |
| 1%-5.0% + Nitrogen | CGM02314720 | 2.0PPM-10000PPM + Nitrogen | - |
3-Component Gas Mixtures have a mixture of multiple ideal gases which are present in equal percentage or amounts. As the pressure of the gas mixtures depends on the total number of particles of gas present, therefore the total pressure of the mixture will simply get doubled the pressure of either components. More or less, the total pressure exerted by a mixture of gases at any given temperature or volume is the total sum of the pressures exerted by an individual gas present in the mixture. Furthermore, if we are aware of the volume, temperature, and the number of moles of each gas in a mixture, then we surely can calculate the pressure which is exerted by an individual gas that is its partial pressure. Pressure the 3-Component Gas Mixtures would exert if it were the only one present.
Contact us with your specific needs, we provide all types of combinations
MSDS is furnished on request
+91-9945075154
alroysge@gmail.com
Our Product List Contains 85 Compositions Of 4-Component Gas Mixture. Few Examples Listed Below
| Benzene 50ppb+Acetaldehyde 500 ppb+Nitrogen Balance | CGM03054710 |
| Diethyl Ether(C4H10O)3%+biogas(CO2+CH4) Balance | CGM03188810 |
| Formaldehyde 0.5%-1.0%+Ethane 1.0%+Nitrogen Balance | CGM03714710 |
| Methane 1.0%+Sulphur Hexafluoride 12.0%+Nitrogen Balance | CGM03364710 |
| Nitric Oxide 50-75ppm+Nitrogen Dioxide 75-100ppm+Nitrogen Balance | CGM03484710 |
| NOX 1662ppm+Sulphur Dioxide 3982ppm+Nitrogen Balance | CGM03784710 |
| Propane 1ppm+Methane 10ppm+Nitrogen Balance | CGM03594710 |
4-Component Gas Mixtures are the combination or blending of multiple gases to serve multiple purposes where the constituents are specified and managed easily. The parent gases that are used in the product are Carbon dioxide acquiring the composition up to 0.30 %, Methane is also around 0.30%, percentage of oxygen is 21.06 % and the remaining ratio of nitrogen is balanced. The gas mixture is very efficient and at the same time significant in petrochemical industries. 4-Component Gas Mixtures are offered in seal packed iron and steel alloyed cylinders which are quiet heavy and the rust proof. The Volumetric gas fraction is responsible to transmit trivially to partial pressure ratio that follows Dalton's law of partial pressures.
Contact us with your specific needs, we provide all types of combinations
MSDS Furnished on request
+91-9945075154
alroysge@gmail.com
Our Product List Contains 45 Compositions Of 4-Component Gas Mixture. Few Examples Listed Below
| Carbon Monoxide 50ppm + Oxygen 20.9 % + R H 50% + Nitrogen Balance | CGM04124710 |
|---|---|
| Carbon Monoxide 500ppm + Carbon Dioxide 500ppm + Methane 500ppm+ Nitrogen Balance | CGM04124720 |
| Carbon Monoxide 1.0 % + Carbon Dioxide 1.0 % + Methane 1.0 % + Nitrogen Balance | CGM04124730 |
| Hydrogen Sulphide 0.01 – 3.0% + Carbon Dioxide 15 - 30% + Methane 60 - 65% + Hydrogen Balance | CGM04303610 |
| Methane 2.0% + Hydrogen 8.0% + Carbon Monoxide 32.0% + Nitrogen Balance | CGM04364710 |
| Methane 60-65% + Carbon Dioxide 15-25% + H2S 0.01- 0.5% + Hydrogen Balance | CGM04303610 |
| Nitrogen Dioxide 100 - 1000ppb + Carbon Dioxide 380ppm + Oxygen 20.0% + Nitrogen Balance | CGM04114710 |
| Nitrogen Dioxide 6.0ppm + Methane 15ppm + Carbon Dioxide 2000ppm + Nitrogen Balance | CGM04484710 |
| Oxygen 0.75% + Carbon Monoxide 950ppm + Carbon Dioxide 4% + Nitrogen Balance | CGM04124710 |
| Nitric Oxide 500ppm + Sulphur Dioxide 500ppm + Carbon Monoxide 500ppm + Nitrogen Balance | CGM04464710 |
BTU gas mixtures are specifically engineered for uses involving primary instrument calibration or for applications where metrological traceability is critical. for consistently accurate measurements. Substantiation for absolute confidence in your measurements. Values guarantee the accuracy of your mixture.
Contact us with your specific needs, we provide all types of combinations
MSDS is furnished on request
+91-9945075154
alroysge@gmail.com
Few Examples Of BTU Gas Mixtures Are Given Below
| CH4 87.0-97.0% + C2H61.5-7.0%+CH8 0.1-1.5% + IC4H10 0.01-03% | CGM04313610 |
Entonox is a well-established pain relieving gas mixture. It consists of two gases, 50% nitrous oxide and 50% oxygen and is more commonly known as gas and air.
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request.
+91-9945075154
alroysge@gmail.com
Few Examples Of Entonox Gas Mixture Are Given Below
| Nitrous Oxide 50% + Oxygen 50% | CGM02495410 |
We offer premium Lighting Gas Mixture is used in industries for multiple applications. Lighting Gas Mixtures, provided by us, are properly packaged in leak-proof cylinders and we make sure that these are quality-tested before dispatch. Our Lighting Gas Mixture is available at competitive rates.
Lighting Gas is used in multiple applications which are used in multiple industrial applications. The main idea is to transport gas through the installation of pipe towards the place where the consumption takes place and further used in lighting gas lamps which is used for illumination. Ranging from flow meters and delivery systems, to generators or regulators, the company offers a complete carrying line of gas handling equipment in order to help you maximize the productivity of certain industry. The product is offered in different quantity and the as per the requirement of the application they are needed for. Lighting Gas has 20 % of neon and 25 % of argon. Moreover the cost efficiency is one of the major factors that influences the demand of the product in the markets
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
Few Examples Of Lighting Industry Gas Mixture Are Given Below
| 10%, 50%, 70% Argon in Neon | CGM02044410 |
| 80%, 98% Argon in Hydrogen | CGM02042910 |
| Krypton 10% + Argon Balance | CGM02350410 |
| Argon 25% + Krypton Balance | CGM02043510 |
| Krypton 74% + Neon 25% + Argon Balance | CGM03043510 |
The natural gas standards are intended to serve as the primary carbon and hydrogen stable isotope reference materials for methane, ethane, and propane, and will be used in research and technology development by industry, academia, and governmental agencies.
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
Few Examples Of Natural Gas Standard Are Given Below
| Ethane 8.4-8.96% + C3H8 5-6% + iso-Butane 0.9-1.3% + N-Butane 1-1.6% + N-Pentane 0.2-0.4% + N-Hexane 0.15-0.4% + CO2 1-2.3% + N2 0.2-0.5% + CH4 Balance | CGM09273610 |
| CO2 1% + O2 0.25% + N2 1.25% CH4 85% + C2H6 5.50% + C3 3% + iC4 1% + nC4 1% + iC5 0.50% + nC5 0.50% + C6 1% | CGM11344710 |
Neonatal Pediatric Gases is a gas that is inhaled. It works by relaxing smooth muscle to widen (dilate) blood vessels, especially in the lungs. Nitric oxide is used together with a breathing machine (ventilator) to treat respiratory failure in premature babies.
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
Few Examples Of Neonatal Pediatric Gases Are Given Below
| NO 10-25ppm + Nitrogen Balance | CGM02464710 |
| NO 450-500ppm + Nitrogen Balance | CGM02464720 |
| NO 900-1000ppm + Nitrogen Balance | CGM02464730 |
| NO2 9.5ppm + Nitrogen Balance | CG484702000 |
| NO2 10ppm + Nitrogen Balance | CGM02484710 |
| NO2 10-12.5ppm + Air Balance | CGM02486510 |
Gas flow proportional detectors are normally used to detect longer wavelength. They are filled with gas, typically a gas mixture of 90% argon & 10% methane (called as “P 10”). The argon is ionized by incoming X-ray photons, and the electric field multiplies this charge into a measurable pulse
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
Regeneration gas desorbs molecular sieve beds chromatographically in the reverse order of the adsorption bed. For example, adsorbed methane and ethane would be desorbed first, then propane and heavier hydrocarbons, then carbon dioxide. This is followed by any hydrogen sulfide that might have been in the inlet gas and, lastly, by the water. The effect of the concentration of these impurities in the regeneration gas stream may be significant when regeneration gas is 10-15% of the net inlet gas.
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
Refinery gas refers to the lightest hydro carbon stream produced from refinery process units. It is typically made of methane and ethane, cut can also have some propane, butane, and hydrogen in it. Refinery gas is typically consumed in the refinery as fuel. Rarely would are finery sell refinery gas as a finished product.
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
Few Examples Of RGA Standard Are Given Below
| Methane 1.5% + Ethane 2.5% + Ethylene 2.5% + Propane 2.5% + Propylene 5% + Iso-butane 3% + n-butane 3% + 1-butene 3% + trans-2-butene 3% + H2 2% + CO2 1% + CO 1% + Iso-pentane 2% + n–pentane 2% + N2 60% | CGM15114710 |
| H2 13% + CO2 3% + O2 1% + N2 36% + CO 1% + CH4 5% + C2H6 4% + C2H4 2% +C2H2 1% + C3 6% + C3H8 3% + C3H6 1% + iC4 5% + nC4 4% + 1-C4H8 2% + iC4H8 1% + t-2C4H8 3% + c-2C4H8 2% + 1,3-C4H6 3% + iC5 1% + nC5 2% + C5=C6 1% | CGM22344710 |
Typically the spark chamber gas consists of a mixture of helium and neon. When a charged particle moves through the box, it ionizes the gases, when a high voltage is applied, sparks are made and form along the trajectory of the particle.
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
Few Examples Of Spark Chamber Gas Mixture Are Given Below
| Helium 10-20% + neon Balance | CGM02254410 |
Different shielding gases play an important role in determining weld penetration profiles, arc stability, mechanical properties of the finished weld, the transfer process you use and more.
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
Few Examples Of Special Shield Gas Mixture Are Given Below
| Argon 20% + Helium Balance | CGM02042510 |
| 2% to 30% CO2 + Argon | CGM02110420 |
| 2% to 10% Nitrogen + Argon | CGM02470420 |
| 2% to 10% Hydrogen + Argon | CGM02290420 |
The normal gas for TIG welding is argon (Ar). Helium (He) can be added to increase penetration and fluidity of the weld pool. Argon or argon/helium mixtures can be used for welding all grades. . For instance, the addition of hydrogen gives a similar, but much stronger, effect as adding helium.
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
Tri Gas Mixtures are commonly used in blood gas analysis to measure pO2, pCO2, and ph. By determining the pO2 and pCO2 in a blood sample, professionals are able to diagnose respiratory issues and have support for different surgical procedures. These blood gas tests are accurate and reliable, as well as fast.
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
Few Examples Of Tri Gas Mixture Are Given Below
| CO2 0.5-12.0% + Nitrogen Balance | CGM02114720 |
| CO2 3.0-12.0% + Oxygen Balance | CGM02125410 |
| CO2 3-12% + O2 5-23% + Nitrogen Balance | CGM03114710 |
CHEMIX handles specific range of Ultra High Pure Gases to match the need of the niche market of critical applications. CHEMIX High Pure Gases are guaranteed to be free of critical contaminants that can cause instrument interference and chromatographic column degradation. We achieve consistent high-purity through extensive cylinder preparation, marking dedicated cylinder for specific gas service, and statistical Quality Control. Use of CHEMIX pure gases optimize analytical results regardless of application and significantly extend instrument life
CHEMIX Pure Gases are specifically catered to the following needs:
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
CHEMIX Pure Gases Listed Below Are Available In Various Grades Depending On Specific Impurity Level And In Different Cylinder Sizes. MSDS Is Furnished While Supplying The Product.
| NAME | FORMULA | GRADE(PURITY) |
|---|---|---|
| Air | Zero, Synthetic, Synthetic HC free, Research Grade | |
| Acetylene | C2H2 | 3.0N(99.9%), AAS, Instrument |
| Ammonia | NH3 | 2.5N(99.5%), 3.0N(99.9%), 5.0(99.999%) |
| Argon | Ar | Zero, 5.0(99.999%), 5.5(99.9995%), 5.8(99.9995%), Research Grade. |
| Carbon Monoxide | CO | 2.5(99.5%), 3.0(99.9%), 3.7(99.97%), 4.5(99.995%). |
| Carbon Dioxide | CO2 | 3.0(99.9%), 4.0(99.99%), 4.5(99.995%), 5.0(99.999%). |
| Ethane | C2H6 | 2.0(99%),3.0(99.9%). |
| Ethylene | C2H4 | 2.5(99.5%),3.5(99.95%) |
| Helium | He | 4.5(99.995%), 4.7(99.997%), 5.0(99.999%), 5.5(99.9995%), 6.0(99.9999%), Research Grade. |
| Hydrogen | H2 | Zero, 4.0(99.99%), 5.0(99.999%), 5.5(99.9995%), 6.0(99.9999%) |
| Hydrogen Sulphide | H2S | 2.5 (99.5%). |
| 1 Butene | 1C4H8 | 2.5 (99.5%) |
| Iso Butane | 1C4H10 | 2.5 (99.5%) |
| Iso Butylene | 1C3H8 | 2.5 (99.5%) |
| Krypton | Kr | 5.0 (99.999%) |
| Methane | CH4 | 2.5(99.5%), 3.5(99.95%), 4.5(99.995%), 5.0(99.999%). |
| N-Butane | C4H10 | 2.5 (99.5%) |
| Nitric Oxide | NO | 2.5 (99.5%) |
| Nitrogen | N2 | Zero, 4.0(99.99%), 5.0(99.999%), 5.5(99.9995%), 6.0(99.9999%), Research Grade. |
| Nitrous Oxide | N2O | 2.5 (99.5%) |
| Neon | Ne | 5.0 (99.999%) |
| Oxygen | O2 | 2.5(99.5%), 5.0(99.999%), Research Grade. |
| Propane | C3H8 | 2.5 (99.5%) |
| Propylene | C3H6 | 2.5 (99.5%) |
| Sulphur Dioxide | SO2 | 2.5(99.5%), 3.0(99.9%), 3.8(99.98%) |
| SulphurHexa Flouride | SF6 | 3.0(99.9%), 3.8(99.98%), 4.0(99.99%) |
| Xenon | Xe | 5.0 (99.999%) |
Emission standards are the legal requirements governing air pollutants released into the atmosphere. Emission standards set quantitative limits on the permissible amount of specific air pollutants that may be released from specific sources over specific timeframes. They are generally designed to achieve air quality standards and to protect human life. Different regions and countries have different standards for vehicle emissions.
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request.
+91-9945075154
alroysge@gmail.com
Few Examples Of Emission Testing Gas Standard Are Given Below
| Propane 300-3000ppm + CO 1-8% + CO2 6-12% + N2 Balance | CGM04594710 |
| Hexane 1600ppm + CO 8% + CO2 13% + N2 Balance | CGM04274710 |
| NO 100-2000ppm + N2 Balance | CGM02464710 |
| CO 900-1000ppm + N2 Balance | CGM02124710 |
| Ammonia 10-500ppm + N2 Balance | CGM02034710 |
| CO 11-12% + N2 Balance | CGM02124710 |
| Methane 2000-2500ppm + Air Balance | CGM02366820 |
| Propane 150-3000ppm + Air Balance | CGM02596810 |
| Propylene 150ppm + Air Balance | CGM02606810 |
| Toluene 70ppm + Air Balance | CGM02646810 |
| CO2 15-20% + N2 Balance | CGM02114740 |
| O2 22-25% + N2 | CGM02564730 |
| Hydrogen 40% + Helium Balance | CGM02292510 |
Environmental monitoring describes the processes and activities that need to take place to characterize and monitor the quality of the environment. Environmental monitoring is used in the preparation of environmental impact assessments, as well as in many circumstances in which human activities carry a risk of harmful effects on the natural environment. We supply all different measuring Standards of Calibration Gas Mixtures at ppm level as well ppb level.
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request.
+91-9945075154
alroysge@gmail.com
Few Examples Of Environmental Monitoring Gas Standard Are Given Below
| Carbon dioxide ppm/% in Air/ N2 | CGM02114710 |
| Carbon Monoxide ppm/% in Air/ N2 | CGM02124710 |
| Hydrogen Sulphide ppm/% in Air/ N2 | CGMO2304710 |
| Methane ppm/% in Air/ N2 | CGM02364710 |
| NO2 ppm/% in Air/ N2 | CGMO2464710 |
| Oxygen ppm/% in N2 | CGM02594710 |
| Propane ppm/% in Air | CGM02594710 |
| Sulfur Dioxide ppm/% in N2 | CGM02614710 |
| CO2-6-13% + CO-1-8% + Propane + 300 – 3000 ppm + N2 Balance | CGM04594710 |
Cultivation of bacteria is a common practice in modern biotechnology. A controlled atmosphere to support the process of growth is necessary. The atmosphere for aerobic organisms is based on oxygen or air and anaerobic organisms require atmospheres based on nitrogen or carbon dioxide.
Both types of bacteria usually require a carbon source for maximum growth. Sterilizing mixtures are used for growth control to eliminate all organisms present.
Contact us with your specific needs, we provide all types of combinations
MSDS is furnished on request
+91-9945075154
alroysge@gmail.com
Few Examples Of Anaerobic & Aerobic Mixture For Culture Are Given Below
| Hydrogen 3% + CO2 97% | CGM02291110 |
| CO2 0.5-10% + Nitrogen Balance | CGM02114730 |
| CO2 0.5-10% + H2 0.5-10.0% + Nitrogen Balance | CGM03114710 |
| CO2 0.5-10% + Oxygen Balance | CGM02115410 |
| CO2 0.5-10% + Air Balance | CGM02116810 |
CNG is odorless, tasteless and non-toxic, and is made up of methane as major, nitrogen, carbon dioxide, propane and traces of ethane. It is an environmentally clean alternative fuel, as its combustion process emits a lower percentage of greenhouse gases when compared to other fuels
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
Gases, formed by normal and abnormal events within the transformer, are dissolved in the oil. By analyzing the volume, types, proportions, and rate of production of dissolved gases, much diagnostic information can be gathered. Since these gases can reveal the faults of a transformer.
Contact us with your specific needs, we provide all types of combinations
MSDS is furnished on request
+91-9945075154
alroysge@gmail.com
Few Examples Of DGA Standard Are Given Below
| CH4 100-1000ppm + C2H6 100-1000ppm + C2H4 100-1000ppm + C2H2 5000ppm + CO 5000ppm + CO2 50-5000ppm+ N2 4000-20% + Argon Balance | CGM08360410 |
We hold immense expertise in manufacturing, supplying and exporting Instrument Gas Mixture. Processed as per the set industry standards and norms, these mixtures are known for their 100% pure composition, inflammability and non-toxic nature. The offered mixtures are processed by mixing methane, argon, hydrogen and helium in various compositions.
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
Being a reputed Manufacturer and Supplier of Instrument Gas Mixture in the market, we make sure that our Instrument Gas Mixture is quality-tested by expert quality auditors. Our Instrument Gas Mixtures are easily miscible. Our Instrument Gas Mixture is used in diverse industries such as Automobile industry, Cement industry, Steel industry, Chemicals industry, etc.
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
Ew Examples Of Instruments Gas Are Given Below
| Helium – 99.995 | CHGU25050 |
| Carbon Dioxide – 99.97 | CHGU11037 |
Sulphur dioxide is a colorless gas with a sharp odor. Sulphur oxides dissolve easily in water and form sulphuric acid, which is an acidic solution. Sulphur dioxide is used within industry for example as bleach, disinfectant and preservation of food.
Few examples of SOX Gas Mixture are given below
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
Electron Capture is a technique that utilizes electron capture gas mixtures to analyze and identify components of a compound. It can also be used to test the purity of a substance. These techniques are commonly used in the pharmaceutical, forensic, and environmental industries.
Contact us with your specific needs, we provide all types of combinations
MSDS is furnished on request
+91-9945075154
alroysge@gmail.com
Few Examples Of Electron Capture Gas Mixture Are Given Below
| P-10, (Methane 10% + Argon Balance) | CGM02360410 |
| P-5, (Methane 5% + Argon Balance) | CGM02360420 |
| Hydrogen 8.5% + Helium Balance | CGM02292510 |
Hydrocarbon Gas Mixture consists of a loose chain of hydrogen and oxygen to make a heterogeneous blend which is also known as natural gas. It is obtained in naturally in coal mines and can also be produced by decomposing organic matter which is then distilled to make highly flammable and volatile mix of gases like methane, butane and many more to make a gaseous ignition agent which can be used in various industries where there is a requirement to build a fire. Hydrocarbon Gas Mixture is available in cylinders of various different sizes as per the volumetric capacities to preserve the gaseous blend at a higher pressure.
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
The gases used in the electronics industry are often the same molecules used in other industrial gases. For example: oxygen, argon or nitrogen. The difference is that they will be supplied at an extremely high purity. Whilst an industrial grade of nitrogen might be 99.98% pure, nitrogen supplied to the electronics sector might be 99.9999% pure.
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
