Chindalia Industrial Products Limited

Hydraulic Jack

We are Offering Hydraulic Jack all Shapes, Sizes and Capacity Available. authorised Distributors for India.

Additional Information:

• Application Industrial
• Weight Of Jack NA
• Close Height NA
• Vehicle Type Heavy Vehicle
• Color Black
• Brand Euro Press Pack
• Size/Dimension NA

• Weight (lbs.) 55

Stressing jack Ideally suited for work on slab-on-grade where dirt, heat and high volume use take their toll. Available in single or double-acting models. Standard single-acting units have a 10" stroke. Other stroke lengths are available on special order. Service repair is simple; components are long lasting and easily replaced. 3" detachable seater nose assembly easily replaced with optional 6" nose assembly. The jack of choice for highrise and elevated work, thanks to fast return time and light weight.

Modular design - pump and cart separate from cylinder and base. Three tonnage capacity options - 55, 100, and 150 tons. Three collapsed height options - 26", 33", and 45". Two standard power options - air ( PA55 ) and electric ( PE55 ). Two control options - remote motor control and remote valve/motor control. Accessory options - 6 5/8" extension, load-holding rings. Select the collapsed height to fit your most frequent application - add jacking modules to suit your needs. Remote operation for maximum operator safety and control - choose "motor only" or "motor and valve" control in the hand. Easy to maneuver - large tires and small "footprint" make it easy to scoot into the tightest quarters, then locate the exact lifting position. Adjustable, heavy-duty handle - makes this jack easy to move, position under vehicles.  Can also be used to transport jack on site with a forklift. Load-holding rings (optional) - provide full rated mechanical load-holding capability. Shielded and sheltered hydraulic lines - for safer, longer, trouble-free service. Cylinder extension (optional) - adds more versatility by extending your jack's reach. Low-temperature oil (optional) - provides smooth, reliable operation in the coldest climate conditions. Modular design - allows you to change lifting modules to suit your tonnage or height requirements.  Use the pump module as a portable power station for your other double-acting cylinders (10, 000 psi). Exclusive load-control system - provides positive, chatter-free control when lowering the load. 

• Pump & Cart Modules

  Pump and cart modules contain hydraulic pump, cart, remote control and all hoses and fittings required to connect to a jack module. Contact factory on folding handle cart option.

  	Remote Control
  Pump	Motor Only	Motor & Valve
  Air	PMA55	PMA55S
  Electric	PME55	PME55S ***
  Electric	PME355	PME355S
  Air	PMA355	PMA355S
  *** For 220V order PME55S-E220 (European)

  
  Jack modules

  Jack modules easily separate from the pump and cart module. 
   

  Tonnage	Cylinder  Stroke	Collapsed Height
  		26"	33"	45"
  55	13 1/8	JM25	JM35	JM45
  100	13 1/8	JM210	JM310	JM410
  150	18 1/8	JM215†	JM315	JM415
  200	18 1/8	JM220*	JM320	JM420
  300	13 1/8	CONTACT FACTORY
  * collapsed height; 28" and stroke 13 1/8"   † stroke 13 1/8"

  Pump and Cart Modules with Assembled Jack Module 

   

  Order  No.	Pump  Type	Power  Required	Valve  Type	Remote  Control*
  JAM10033	Air	50 CFM @ 80 psi	Manual	M
  JAM15033	Air	50 CFM @ 80 psi	Manual	M
  JAR10033	Air	50 CFM @ 80 psi	Air Pilot	M & V
  JEM5526	Electric	25 amps	Manual	M
  JEM15026	Electric	25 amps	Manual	M
  * M - Remote Motor Control  * V - Remote/Valve Motor Control

   

  
  
  
  
  
  
  
  
  
  
  

• Model  Series	A	B	C	D	E	F	G	H
  PMA & PME	57 5/8"	29 5/8"	53 1/4"	30"	34 5/16"	23 3/8"	*70°	16" Tire Dia.
  * Total range with varying degree increments.

  
  Pump and Cart Modules with Assembled Jack Module 

  Order  No.	Capacity  (tons)	Ret. Height  (in.)	Ext. Height  (in.)	Stroke  (in.)
  JAM10033	100	33	46 1/8	13 1/8
  JAM15033	150	33	46 1/8	13 1/8
  JAR10033	100	33	46 1/8	13 1/8
  JEM5526	55	26	39 1/8	13 1/8
  JEM15026	150	26	39 1/8	13 1/8

  
  
  
  
  
  
  
  

Power Team Monostrand Stressing Jacks are the most durable in the industry. Ideally suited for work on slab-on-grade where dirt, heat and high volume use take their toll. Available in single or double-acting models. Standard single-acting units have a 10" stroke. Other stroke lengths are available on special order. Dead-end seaters for production work and field work available on special order. (Part #400120) Service repair is simple; components are long lasting and easily replaced. 3" detachable seater nose assembly easily replaced with optional 6" nose assembly. The jack of choice for highrise and elevated work, thanks to fast return time and light weight. All hydraulic fluid controls are internal; more efficient and safer operation during tensioning and retraction. Standard double-acting units have an 8 1/2" stroke; others available on special order. Specially designed Power Team Control Valves are available for post tensioning jacks.

• Order  No.	Description	Cyl.  Cap.  (tons)	Stroke (in.)	Seater Type	Internal  Pressure at Cap.	Tons at  10,000 psi	Weight  (lbs.)
  SJ2010	Post tension jack with spring seater, 0.50" strand.	20	10	Spring	8,948	22.4	55.0
  SJ2010P	Post tension jack with power seater, 0.50" strand.	20	10	Power	8,948	22.4	55.0
  SJ2010DA	Double-acting post tension jack with power seater, 0.50" strand.	20	8 1/2	Power	7,575	26.4	42.0
  SJ3010	Post tension jack with spring seater, 0.60" strand.	30	10	Spring	9,549	31.4	76.0
  SJ3010P	Post tension jack with power seater, 0.60" strand.	30	10	Power	9,549	31.4	76.0
  SJ3010DA	Double-acting post tension jack with power seater, 0.60'' strand.	30	8 1/2	Power	7,554	39.7	52.0
  *See current price list for shipping weights.

  
   

  Order  No.	Recommended  Pumps for this  Stressing Jack	Oil  Cap.  (cu. in.)	Strand  Dia.  (in.)
  SJ2010	PE554P/PE604T	45.2	.375-.50
  SJ2010P	PE554PT/PE604PT	45.2	.375-.50
  SJ2010DA	PE554PT/PE604PT	53.0	.375-.50
  SJ3010	PE554P/PE604T	63.6	.375-.60
  SJ3010P	PE554PT/PE604PT	63.6	.375-.60
  SJ3010DA	PE554PT/PE604PT	67.6	.375-.60

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

• Order  No.	A  (in.)	B  (in.)	C  (in.)	Weight  (lbs.)
  SJ2010	21	9	6 ½	55
  SJ2010p	22	10 13/64	7	76
  SJ3010	22	10 13/64	7	76
  SJ3010p	22	10 13/64	7	76
  SJ2010da	18 ½	7 ½	6 ½	45
  SJ3010da	18 ½	8 ½	6 ½	52

  
  
  
  
  
  

THE RIGHT CHOICE FOR THOSE LOWER CLEARANCE JOBS. All the quality, features and lifting capacity of the standard jacks in short form. The 12-ton and 20-ton models feature screw extensions for added versatility. All jacks meet ASME B30.1 standards Power Team Marathon Lifetime Warranty All jacks operate both vertically and horizontally for use in a variety of lifting, pushing and spreading applications.

• Order  No.	Cap.  Tons	Stroke  (in.)	Handle Effort  at Rated Cap.  (lbs.)	Carry  Handle	Weight  (lbs.)
  9012A	12	3 3/4	60	Yes	14.0
  9020A	20	3 3/8	70	Yes	22.2
  9130A	30	3 1/8	50	Yes	30.2
  * See current price list for shipping weights.  ‡ 2 Speed: Rapid advance.40 strokes; Lift mode.160 strokes.

  Order  No.	Retracted  Height  Min.  (in.)	Length  of Screw  Ext.  (in.)	Height  w/ Screw  Ext.  (in.)	No. Pump  Strokes to  Ext. Piston  (in.)	Saddle  Dia.  (in.)	Base Size  (in.)	Pump Handle  Length  (in.)
  9012A	6 3/4	3	13 1/2	26	1 7/8	6 1/2 x 4 3/16	23 13/16
  9020A	7 1/8	1 9/16	12	22	2	7 3/16 x 5 1/16	31 1/2
  9130A	7 1/8	––	10 1/4	35	2 3/8	7 9/16 x 5 9/16	39 3/8

   

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

INDUSTRIAL LIFTING AND PUSHING APPLICATIONS. Choose from this complete line of premium quality, standard bottle jacks. Ideal for use in any number of industrial lifting and pushing applications. The 9110B, 9015B, 9022B and 9033B feature a beveled base which allows the jack to “follow” the load, reducing the chance of dangerous side-loading. Many jacks feature screw extensions Some jacks can be used in the vertical, angled or horizontal positions. Serrated or contoured saddles help stabilize the load for a safer lift. All jacks meet ASME B30.1 standards and carry the Power Team Marathon Lifetime Warranty. 110-ton jack features dual pumps for time-saving two-speed operation.                                                                                                                                                                                                                                                                                                                                                                               

• Order  No.	Cap.  Tons	Stroke  (in.)	Pump  Handle  Length  (in.)	Handle Effort  at Rated Cap.  (lbs.)	Carry  Handle	Weight  (lbs.)
  9002A	2	4 1/2	12 1/4	75	No	4.8
  9003A	3	4 1/2	19 1/4	45	No	5.8
  9005A	5	4 3/4	21 7/16	55	No	8.0
  9008A	8	4 3/4	23 13/16	75	No	12.1
  9112A	12	5 7/8	23 13/16	60	Yes	17.5
  9015B	15	6 1/8	27 9/16	90	No	18.3
  9120A	20	6 1/4	31 1/2	70	Yes	28.5
  9022B	22	6 1/8	27 9/16	90	Yes	23.6
  9030A	30	6 1/4	39 3/8	50	Yes	41.2
  9033B	33	5 5/8	27 9/16	88	Yes	32.0
  9050A	50	6 3/4	39 3/8	85	Yes	78.0
  9110B	110	6 1/8	27 9/16	79	Yes	154.3

  Order  No.	Retracted  Height  Min.  (in.)	Length  of Screw  Ext.  (in.)	Height  w/Screw  Ext.  (in.)	No. Pump  Strokes to  Ext. Piston  (in.)	Saddle  Dia.  (in.)	Base Size  (in.)
  9002A	7 1/8	1 15/16	13 9/16	5	1	4 11/32 x 2 9/16
  9003A	7 1/2	2 3/8	14 3/8	10	1 1/8	4 1/2 x 2 27/32
  9005A	7 7/8	2 3/4	15 3/8	12	1 3/8	5 3/16 x 3
  9008A	7 7/8	2 3/4	15 3/8	18	1 1/2	6 x 3 1/2
  9112A	9 1/2	3 1/8	18 1/2	26	1 7/8	6 1/2 x 4 3/16
  9015B	9 1/16	4 1/2	19 7/8	27	2 3/8	5 1/8 x 5 1/2†
  9120A	10 5/8	3 5/8	20 1/2	22	2	7 3/16 x 5 1/16
  9022B	9 7/16	4 5/16	20 1/2	36	2 3/8	6 1/2 x 6 5/16†
  9030A	11	––	17 1/4	35	2 3/8	7 9/16 x 5 9/16
  9033B	9 7/16	4 3/16	19 3/4	56	2 9/16	71/4 x 6 15/16†
  9050A	12	––	18 3/4	35	3	9 5/16 x 7 3/8
  9110B	11 13/16	––	17 15/16	40/160‡	4 3/8	13 3/8 x 11 7/16
  *See current price list for shipping weights.  † Comes with a Beveled Base  ‡ 2 Speed: Rapid advance≈40 strokes; Lift mode≈160 strokes

   

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

The non-skid space-age reinforced inflatable jack is perfect for many applications. Highly flexible and lightweight jacks only require an air supply of 116 psi maximum. Any non-explosive gas or water can also be used for inflation. Uninflated jacks are only 1" thick, making seemingly impossible lifting tasks routine. Space-age reinforced, multi-layer aramid construction, widely overlapping on all sides. Tested at 175 psi. In rugged testing, jacks withstood tens of thousands of inflate/deflate cycles at 116 psi. Large surface area and material flexibility allow jacks to lift loads on soft or compressible surfaces without support cribbing being necessary. Safety first! The controller, shut-off and air hoses are all equipped with USA industrial interchange style air couplers. Female half coupler bodies have a locking collar, protecting operator from accidentally disconnecting jack while under load. Surface of jack has a non-skid pattern, assuring that the jack won’t “walk away” from the job. Jacks can be used to lift a load from an uneven surface, are tolerant of side-loaded applications. Non-conducting material resists oil, ozone and most chemicals. Cold resistant down to -40° F, heat resistant up to 240° F (short term) or 200° F (long term). Field-replaceable nipples are made of tough steel, with internal thread to prevent abrasion damage. Ideal needle aperture of 1/4" allows rapid inflation, without risk of icing, and permits a safe lowering speed. Single jack controller with “dead man” control (350090). Can be used individually, or in multiples to regulate any number of jacks desired. Heavy attachment straps are provided on 4 largest sizes for attachment of a rope or hook to position the jack from a safe distance. Inflation hose system is color-coded (red and yellow) for easy recognition when using more than one jack. BE SAFE! INSPECT BEFORE AND AFTER EACH USE. REPLACE IF ANY SIGNS OF DEGRADATION OR WEAR THAT MAY AFFECT SAFETY OR PERFORMANCE. KEEP THE PRODUCT CLEAN. STORE PROPERLY.

• Order No.	Lifting  Cap.  (tons)	Lifting  Height  (in.)	Air Contents  at 116 psi  (cu. ft.)	Max. Working  Pressure  (psi)	Weight  (lbs.)
  IJ 13	1.1	2 45/64	0.08	116	1.0
  IJ 45	3.6	4 45/64	0.5	116	3.0
  IJ 76	7.0	6 19/64	1.48	116	4.0
  IJ 128	12.0	8 51/64	3.4	116	8.0
  IJ 2211	23.8	12	9.5	116	16.0
  IJ 3213	34.0	14	16.4	116	22.0
  IJ 4416	46.3	16 13/32	25.7	116	29.0
  IJ 7320	74.6	20 1/2	51.4	116	58.0
  *See current price list for shipping weights.

  Order No.	Length  (in.)	Width  (in.)	Collapsed  Height  (in.)
  IJ 13	5 1/2	5 7/64	1
  IJ 45	10	7 29/32	1
  IJ 76	12	12	1
  IJ 128	15 45/64	15 45/64	1
  IJ 2211	21 45/64	21 45/64	1
  IJ 3213	25 39/64	25 39/64	1
  IJ 4416	29 1/2	29 1/2	1
  IJ 7320	37 13/32	37 13/32	1 13/64
  *See current price list for shipping weights.

   

  
  
  
  
  
  
  
  
  
  
  
  
  
  

JUST THE POWER YOU NEED AT A PRICE YOU CAN AFFORD These bottle jack-style toe jacks are loaded with many of the same features as our standard bottle jacks, but the toe-lift feature and swiveling pump handle socket make them ideal for machinery lifting and positioning. An internal pressure relief provides added safety by limiting the jack's lifting capability to the capacity of the toe. Spring return is an added feature on the larger jacks. Swiveling pump handle assembly available on the 5 and 10-ton models. The swiveling jack assembly allows you to access and pump the unit from numerous positions. Meets ASME B30.1 standard

• Order  No.	Cap. Tons	Max Lift Stroke	Strokes to Extend  Piston at Max Load	Handle Effort  at Max Load  (lbs.)	Carry Handle	Weight  (lbs.)
  J24T	2	4 3/4	14	42	Yes	18.3
  J55T	5	4 7/8	22	60	Yes	53.0
  J106T	10	5 7/8	31	73	Yes	83.8
  *See current price list for shipping weights.

   

  	A		B		C	D	E	F
  Order No.	Ret.  (in.)	Ext.  (in.)	Ret.  (in.)	Ext.  (in.)	(in.)	(in.)	(in.)	(in.)
  J24T	5/8	5 1/2	9 1/4	14	1 7/8	7 1/8	2	4 15/16
  J55T	1	5 7/8	11 1/2	16 3/8	1 7/8	10 1/8	3	7 1/4
  J106T	1 1/4	7 1/8	12 7/8	18 3/4	2 1/2	11 1/2	3 15/16	9 1/2