Post Your Requirement Menu

Welcome User

Our Product / Services

  1. Hydraulic and Pneumatic Machines 3 Products / Services available
  2. Crowbar 1 Products / Services available
  3. Grease Pumps 1 Products / Services available
  4. Sealants 1 Products / Services available
  5. Boom Lifts 3 Products / Services available
  6. Laces, Interlinings & Other Accessories 2 Products / Services available
  7. Tachometers 1 Products / Services available
  8. Hand Tool 4 Products / Services available
  9. Milling Cutter & Cutting Tools 1 Products / Services available
  10. Fertilizer Machine 2 Products / Services available
  11. Crimping Tools 1 Products / Services available
  12. Router, Cables & Networking Devices 1 Products / Services available
  13. Motor Controllers 2 Products / Services available
  14. Adapter 3 Products / Services available
  15. Oil Pump 1 Products / Services available
  16. Hydraulic Tools 1 Products / Services available
  17. Brackets 1 Products / Services available
  18. Industrial Coupler 2 Products / Services available
  19. Cap Closures 1 Products / Services available
  20. Battery Accessories 1 Products / Services available
  21. Metal & Metal Products 1 Products / Services available
  22. Scaffolding and Scaffolding Parts 1 Products / Services available
  23. Spanners 1 Products / Services available
  24. Dinnerware, Tableware and Serving Utensils 1 Products / Services available
  25. Bearings 1 Products / Services available
  26. Measuring Instruments & Equipment 1 Products / Services available
  27. Paper & Paper Products 1 Products / Services available
  28. Cooler Parts 1 Products / Services available
  29. Measurement Gauges & Fittings 2 Products / Services available
  30. Industrial Valves 9 Products / Services available
  31. Pumps, Pumping Machines & Parts 8 Products / Services available
  32. Bushings 1 Products / Services available
  33. LED, LCD, Smart TV & Home Theatre 1 Products / Services available
  34. Caster Wheels 1 Products / Services available
  35. Hose Pipes 1 Products / Services available
  36. Mounting Accessories 1 Products / Services available
  37. Valves & Valve Fittings 8 Products / Services available
  38. Door, Window Frames 1 Products / Services available
  39. Crane 1 Products / Services available
  40. Hydraulic Press 3 Products / Services available
  41. Industrial Jacks, Lifts & Winches 9 Products / Services available
  42. Clamps 1 Products / Services available
  43. Hydraulic Cylinder 2 Products / Services available
  44. Hammers 1 Products / Services available
  45. Hydraulic Component 2 Products / Services available
  46. Automobile Repair Tools & Equipment 2 Products / Services available
  47. Industrial Pump 3 Products / Services available
  48. Pressure Pump 1 Products / Services available
  49. Other Products / Services 61 Products / Services available

Other Products / Services

We are leaders in the market for providing best range of Automatic Relief Indicator Industrial Accessories, Broken Line Indicator Industrial Accessories, Grease Piston Distributors, High-Speed Spindl-Gard System and LubriSystem Injectors

Automatic Relief Indicator Industrial Accessories

Allows machine to continue to run while non-critical bearings are lubricated No time or effort required for reset after blockage is cleared Easy information on blocked lines, high system pressure or blocked bearings Works with MSP, MX, MXP, MJ and MHH divider valves

View Complete Details

Broken Line Indicator Industrial Accessories

Monitors lube line integrity to ensure lubricant is delivered to critical bearings Provides a visual or electronic indication. Works with terminating oil or grease systems as well as recirculating systems

View Complete Details

Grease Piston Distributors

  • Lubricant Synthetic and mineral oils
  • Working pressure 145 to 652 psi
  • Pressure relief < 21.7 psi
  • Working temperature 32° to 158°F
  • Gasket material FPM
  • Viscosity 1.25 to 78.3 in2 /sec
  • Lubricant Synthetic and mineral oils; fluid grease NLGI 00-000
  • Working pressure 261 to 725 psi
  • Pressure relief < 43.5 psi
  • Viscosity 1.25 to 78.3 inches2 /sec

Volume outputs ranging from 0.01 to 0.10 cubic inches Several manifold options with up to 10 ports allow for fast installation and simple future expansion 4 metering nipple options Direct-to-bearing versions available for use in specialized applications

View Complete Details

High-Speed Spindl-Gard System

Advanced air/oil concept provides highly effective lubrication, reduces oil consumption, lowers operating temperature and protects spindle bearings from coolant ingress and minimizes thermal distortion resulting in improved production accuracy Thin oil film dramatically reduces viscous shear and hydrodynamic drag on the bearing, resulting in reduced friction and lower energy consumption Airflow adjustment for each bearing point provides better control Oil output selectable for each bearing point helps to customize the system Eliminates the clean up and environmental problems that result from mist systems

View Complete Details

LubriSystem Injectors

Two piece compression fitting included for fast, easy installation Bundled system tubing available for easy installation Threaded outlet allows for manifold or direct-to-bearing mounting Adjustable output volume

View Complete Details

Manzel MHH Divider Valves

  • Material Steel Body (corrosion protected) Steel Piston (honed fit)
  • Pressure (max) 7,500 psi for Petroleum or Synthetic Oil - fluoroelastomer
  • Lubricant Petroleum or synthetic oil only
  • Maximum Operating Temperature Fluoroelastomer O-rings (557722) 350°F
  • Maximum Cycle Rate Without Cycle Pin 200 CPM 
  • 3 section divider valve assembly 5.9 lb
  • 4 section divider valve assembly 7.3 lb
  • 5 section divider valve assembly 8.7 lb
  • 6 section divider valve assembly 10.2 lb
  • 7 section divider valve assembly 11.6 lb
  • 8 section divider valve assembly 13.0 lb
  • Mounting Screw 8-9 ft lb
  • Enclosure Plugs 6-8 ft lb
  • Indicator Port Plug 5-7 ft lb
  • Bleed Screws 1-2 ft lb
  • Tie Rod Nut 5-8 ft lb

Quick change valve sections can be removed from the base assembly without disturbing any lube lines–minimizing labor cost and maximizing your machine uptime Can be easily accessorized with magnetic and electronic proximity switch .cycle indicators to provide positive assurance of a successful lube event Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time

View Complete Details

Oil Piston Distributors

  • Lubricant Synthetic and mineral oils
  • Working pressure 145 to 652 psi
  • Pressure relief < 21.7 psi
  • Working temperature 32° to 158°F
  • Gasket material FPM
  • Viscosity 1.25 to 78.3 in2 /sec
  • Lubricant Synthetic and mineral oils; fluid grease NLGI 00-000
  • Working pressure 261 to 725 psi
  • Pressure relief < 43.5 psi
  • Viscosity 1.25 to 78.3 inches2 /sec

Volume outputs ranging from 0.01 to 0.16 cubic inches Several manifold options with up to 10 ports allow for fast installation and simple future expansion 5 metering nipple options Direct-to-bearing versions available for use in specialized applications

View Complete Details

Thrif-T Luber Metering Device

Full range of metering amounts for lubricating almost any machine Available in three types and ten flow ranges to meet lube requirements Quality sintered bronze filters won’t shred or clog like felt filters

View Complete Details

Trabon MD Divider Valve

  • Material Steel
  • Pressure (max) 3,000 psi
  • Lubricant Oil or grease
  • Net Weight (approx.) 1 lb 8 oz
  • MD-2, MD-3, MD-4 0.080 in3
  • MD-6 0.060 in3
  • Assembly Bolts 8-9 ft lb
  • Enclosure Plugs 11-13 ft lb
  • Indicator Plug 15 ft lb
  • Outlet Plugs 6-7 ft lb

Available with 2, 3, 4, or 6 outlets Easy to install on new or existing equipment Use our cycle indicator pin models to provide positive assurance of a successful lube event Fluoroelastomer seals for high temperature applications or synthetic lubricants

View Complete Details

Electro-Hydraulic Barrel Pumps

Typical applications include steel mills, pulp and paper, cement plants and other heavy-duty applications Handles oil and grease up to NLGI #2

View Complete Details

Manual Hand Pump

Heavy-duty materials and construction ensures reliability and long life Fill reservoirs in half the number of strokes of light-duty hand pumps Two stroke settings for high-pressure/low-volume and high-volume/low-pressure pumping Compact 35 lb or 5 gal (16 kg or 20 L) pail pump for greater mobility Pumps NLGI #2 grease and lower viscosities Follower plate keeps grease at the foot of the pump Dual-action pump delivers grease on both up and down strokes Delivers 2.3 oz (65 g) of grease per stroke when using the high-pressure/lowervolume setting Delivers 3.0 oz (85 g) of grease per stroke when using the high-volume/lowerpressure setting

View Complete Details

Oil Dispenser Bar

Tough metal cabinet with baked-on enamel finish. Constructed with single-dispense tap and waste pan with plated, perforated metal service area and drain connection.

View Complete Details

Swivel Covers

Available for SD and LD Series Meters. Black swivel cover is standard. Also available in red, blue, green and yellow for LD Meters      

View Complete Details

APEX Transfer Pumps

  • Maximum Working Pressure 65 psi
  • Models 260100, 260101, 260104: 65 psi
  • Model 260102: 30 psi
  • Model 260100: 5.8 gpm
  • Model 260101: 4.25 gpm
  • Model 260104: 4.25 gpm
  • Inlet Size 1 in npt
  • Outlet Size 3/4 in npt
  • Model 260100: 34 lb
  • Models 260101, 260102, 260104: 25 lb
  • Model 260100: 12 VDC, 35 amps
  • Models 260101, 260102: 115 VAC, 60 Hz, 9.2 amps
  • Model 260104: 230 VAC, 50/60 Hz, 4 amps
  • Model 260101, 260102 only: 30 in
  • Hose Size 8 ft, 3/4 in ID
  • Suction Tube 34 in

Available with 12 VDC, 115 VAC and 230 VAC electric motors Self-priming, positive displacement design Pumps petroleum- and synthetic-based lubricants up to 8 gpm (30 lpm) Built-in bypass valve Transfer used oil with inlet suction screen ( 260306) TENV electric motor for demanding environments, models 260105,  260106, 260108 and 260109 System includes suction tube, fluid hose, dispense valve and bung adapter for models 260100, 260101, 260102 and 260104

View Complete Details

Petroleum Electric Transfer Pumps

  • Flow Range 0.5 to 2.0 gpm
  • Out-of-box flow rate 1.5 gpm
  • Operating Pressure Range 20 to 200 psi
  • Weight (varies depending on model) 12.0 - 19.8 lb
  • Storage Temperature Range .-40° to 120°F
  • Operating Temperature Range 32° to 120°F
  • Wetted Parts aluminum, polyurethane (ester based), polypropylene, stainless steel, brass, nylon, nitrile rubber, steel. zinc
  • Fluid Compatibility motor oils, automatic transmission fluid, antifreeze (50/50 mix), gear lubricant
  • Accuracy ±1.5%
  • Repeatability ±.45%
  • Sound Pressure Level 66.7 dB(A)
  • Sound Power Lovel 78.1 dB(A)

Go from the box to pumping oil in just 10 minutes! The only tools you need are a Phillips screwdriver and a utility knife. Fits any container up to 44 in (1.1 m) tall with a 2 in NPT opening. Measures in quarts, gallons, pints or liters. Has an automatic nozzle, easy-to-carry handle, 8 or 25 ft (2.4 or 7.6 m) hose and an accurate and easy-to-read digital display.

View Complete Details

Solid State Timer

  • Voltage 115,230 V AC
  • Application Industrial
  • Material NA
  • Features Easy mounting and installation, Face-mounted LED displays timer status at a glance,Operates on standard 115/230 VAC 50/60 Hz input power
  • Brand NA
  • Power NA
  • Max. Pressure NA

View Complete Details

Carbon Steel Grease Injector

  • Material Steel
  • Country of Origin Made in India
  • Maximum Working Pressure 241 bar
  • Compatible Material Grease
  • Compatible Metering Device Single Line Parallel
  • Cycle Indicator Visual Pin
  • Inlet Size 0.3175 cm
  • Inlet Size 3.175 mm
  • Inlet Thread Gender Female
  • Inlet Thread Type NPT

View Complete Details

Grease Injectors Metering Devices

  • Minimum Operating Pressure 750 psi
  • Suggested Operating Pressure 850 psi
  • Reset Pressure 150 psi
  • Wetted Parts Carbon Steel, Stainless Steel, Copper, Fluoroelastomer
  • Minimum Operating Pressure 1200 psi
  • Suggested Operating Pressure 2500 psi
  • Reset Pressure 200 psi
  • Maximum Operating Pressure 1000 psi
  • Output Volume per Cycle Adjustable: 0.001 to 0.008 sq in
  • Recommended Fluids Minimum SAE 10 Weight Oil
  • Maximum Operating Pressure 3500 psi
  • Recommended Fluids Grease N.L.G.I. Grades #000 to #2

Longer lasting seal design for trouble-free performance Precision-honed components for reliable operation in challenging environments Adjustable output volume from .001–.008 cubic inches (0.02–0.13 cm3) to custom fit the system to meet the needs of each lube point Convenient front-mounted cycle pin indicator for quick confirmation that the injector is functioning properly Operating pressures from 1200–3500 psi (83–241 bar) for optimal performance with up to NLGI #2 grease Offered both as a stand-alone injector and replacement injector for manifold systems, allowing you to custom fit the injectors to your applications

View Complete Details

MRT: Bolt Tensioner

Manual Return Bolt Tensioner Piston stroke limiti indication Compatible with SRT Tensioner Range Piston/Cylinder msalignment compensation Bolt coverage from 1" to 3 1/2" with just 4 tools Designed to fit BS1560/ANSI B16.5/API flanges Unique quick-release bridge adaptation

  • Tool Ref 
    Load Cell
    Bolt Diameter Tool Load Hydraulic Area Aprox. Weight
    Imp. Kit No. Metric Kit No. Ton Short KN (in2) (mm2) (lbs) (kg)
    MTRAS010001 (MRT1) 1” 
    1 1/8”
    MRTAS0010002
    MRTAS0010003
    M24 
    M27
    MRTAS010004
    MRTAS010005
    31.5 280 2.89 1867 6.6 3.0
    MTRAS020001 (MRT 2) 1” 

    1 1/8"
    1 1/4” 
    1 3/8"
    MRTAS0020002

    MRTAS020003 
    MRTAS020004 
    MRTAS020005

    M24 
    M27 
    M30 
    M33 
    M36

    MRTAS020006
    MRTAS020007
    MRTAS020008
    MRTAS020009
    MRTAS020010
    506.0 450 4.65 3001 9.9 4.5
    MTRAS030001 (MRT 3) 1-1/4” 
    1-3/8” 
    1-1/2” 
    1-5/8”
    MRTAS030002 
    MRTAS030003 
    MRTAS030004 
    MRTAS030005
    M33 
    M36 
    M39 
    M42
    MRTAS030006
    MRTAS030007
    MRTAS030008
    MRTAS030009
    75.0 660 6.82 4401 12.98 5.9
    MTRAS040001 (MRT 4) 1-1/2” 
    1-5/8” 
    1-3/4” 
    1-7/8” 
    2"
    MRTAS040003 
    MRTAS040004 
    MRTAS040005 
    MRTAS040006 
    MRTAS040007
    M39 
    M42 
    M45 
    M48
    MRTAS040008
    MRTAS040009
    MRTAS040010
    MRTAS040011
    112.0 1000 10.34 6668 18.70 8.5
    MTRAS050001 (MRT 5) 2” 
    2-1/4” 

    2-1/2” 
    2-3/4”
    MRTAS050003 
    MRTAS050004 

    MRTAS050005 
    MRTAS050006 
    M52 
    M56 
    M60 
    M64 
    M68 
    M70
    MRTAS050007
    MRTAS050008
    MRTAS050009
    MRTAS050010
    MRTAS050011
    MRTAS050012
    168.0 1500 15.50 10003 30.80 14.0
    MTRAS060001 (MRT6) 2-3/4” 
    3” 

    3-1/4” 
    3-1/2”
    MRTAS060003 
    MRTAS060004 

    MRTAS060005 
    MRTAS060006
    M72 
    M76 
    M80 
    M85 
    M90
    MRTAS060007
    MRTAS060008
    MRTAS060009
    MRTAS060010
    MRTAS060011
    281.0 2500 25.84 16671 50.60 23.0

     

     

     

     

     

     

           
     



















































































View Complete Details

Top Side Tensioner

SPRING RETURN BOLT TENSIONER Unique quick release bridge adaptation Piston overstroke prevention Piston stroke indication Compatible with  MRT  Tensioner range Piston/ cylinder misalignment compensation Bolt coverage from 1” to 3 ½” with just 4 tools Designed to fit BS1560 / ANSI B16.5 / API flanges Fully enclosed load cell design eliminates entry of debris into piston retraction mechanism The Spring Return design dramatically increases productivity and safety on the job site when compared to older technology manual return tensioners. Order a load cell and an adaptor kit to make a complete tensioner.  Each are sold separately.  

  • Tool Ref 

    Load Cell
    Stud Diameter Tool Load Hydraulic Area Approx. 
    Weight

    Imperial
    Adapter Kit 
    Order No.

    Metric
    Adapter Kit 
    Order No.
    Lbs 
    (tonf)

    KN

    (in2)

    (mm2)

    (lbs.)

    (kg.)
    SRT 0 
    SRTAS000001
    3/4" 
    7/8"
    SRTAS000002 
    SRTAS000004
    M20 
    M22
    SRTAS000006 
    SRTAS000008
    35494 
    (16.1)
    160 1.65 1067 3.1 1.4
    SRT 1 
    SRTAS010001
    1" 
    1-1/8"
    SRTAS010003 
    SRTAS010005
    M24 
    M27
    SRTAS010007 
    SRTAS010009
    61949 
    (28.1)
    280 2.89 1867 6.0 2.7
    SRT 2 
    SRTAS020001
    1" 

    1-1/8" 
    1-1/4" 
    1-3/8"
    SRTAS020003 

    SRTAS020005 
    SRTAS020007 
    SRTAS020009
    M24 
    M27 
    M30 
    M33 
    M36

    SRTAS020011 
    SRTAS020013 
    SRTAS020014 
    SRTAS020015 
    SRTAS020016

    99648 
    (45.2)
    450 4.65 3001 9.0 4.1
    SRT 3 
    SRTAS030001
    1-1/4" 
    1-3/8" 
    1-1/2" 
    1-5/8"
    SRTAS030003 
    SRTAS030005 
    SRTAS030007 
    SRTAS030009
    M33 
    M36 
    M39 
    M42
    SRTAS030011 
    SRTAS030012 
    SRTAS030013 
    SRTAS030014
    145945 
    (66.2)
    660 6.82 4401 11.9 5.4
    SRT 4 
    SRTAS040001
    1-1/2" 
    1-5/8" 
    1-3/4" 
    1-7/8" 
    2"
    SRTAS040004 
    SRTAS040006 
    SRTAS040008 
    SRTAS040010 
    SRTAS040012
    M39 
    M42 
    M45 
    M48

    SRTAS040014 
    SRTAS040015 
    SRTAS040016 
    SRTAS040017

    223546 
    (101.4)
    1000 10.34 6668 18.5 8.4
    SRT 5 
    SRTAS050001
    2" 
    2-1/4" 

    2-1/2" 
    2-3/4"
    SRTAS050004 
    SRTAS050006 

    SRTAS050008 
    SRTAS050010
    M52 
    M56 
    M60 
    M64 
    M68

    SRTAS050012 
    SRTAS050013 
    SRTAS050015 
    SRTAS050016 
    SRTAS050018

    331372 
    (150.5)
    1500 15.50 10003 30.4 13.8
    SRT 6 
    SRTAS060001
    2-3/4" 
    3" 

    3-1/4" 
    3-1/2"
    SRTAS060004 
    SRTAS060006 

    SRTAS06000 
    8SRTAS060010

    M72 
    M76 
    M80 
    M85 
    M90

    SRTAS060014 
    SRTAS060016 
    SRTAS060018 
    SRTAS060020 
    SRTAS060022
    553134 
    (250.9)
    2500 25.84 16671 50.7 23.0
    SRT 7 
    SRTAS070001
    3-1/2" 

    3-3/4" 
    4"
    SRTAS070004 

    SRTAS070006 
    SRTAS070008

    M90 
    M95 
    M100

    SRTAS070010 
    SRTAS070012 
    SRTAS070014

    708118 
    (321.2)
    3200 33.06 21339 70.5 32.0
     


























































































































View Complete Details

subsea tensioner

QUICK REACTION SUBSEA TENSION Our Subsea bolt tensioner incorporating the quick reaction nut feature reduces diver fatique, improving diver safety and productivity.  Visible piston stroke indication Piston/cylinder misalignment compensation Anti-slip cylinder surface for improved handling Low friction seals Anti-corrosion coating Bolt coverage from 3/4" to 3 1/2" Designed to fit BS1560/ANSI B16.5/ API flanges, as well as most compact flange designs

  • Load Cell 
    (Tool Ref)
    Bolt Diameter Tool Load Hydraulic Area Minimum Bolt 
    Protrusion 
    (above nut)
    Imperial Quick Reaction Nut Number. Metric Quick Reaction Nut Number Ton 
    (short)
    KN (in2) (mm2) (in) (mm.)
    SSTAS010001
    (SST 1)
    3/4" 
    7/8"
    QRNAS010001 
    QRNAS010003
    M20 
    M22
    QRNAS010004 
    QRNAS010005
    15.7 140 1.45 934 4.09
    3.98
    107 
    105
    SSTAS020001
    (SST 2)
    1" 
    1-1/8"
    QRNAS020001 
    QRNAS020003
    M24 
    M27 
    M30
    QRNAS020004 
    QRNAS020005 
    QRNAS020006
    27 240 2.48 1600 5.24
    5.12
    139 
    136 
    134
    SSTAS030001
    (SST 3)
    1-1/4" 
    1-3/8"
    QRNAS030003 
    QRNAS030004
    M33 
    M36
    QRNAS030005 
    QRNAS030006
    43 380 3.93 2534 5.35
    5.24
    142 
    139
    SSTAS040001
    (SST 4)
    1-1/2" 
    1-5/8"
    QRNAS040003 
    QRNAS040004
    M39 
    M42
    QRNAS040005 
    QRNAS040006
    62 550 5.69 3668 5.94
    5.83
    5.71
    160 
    158 
    154
    SSTAS050001
    (SST 5)
    1-3/4" 
    1-7/8" 
    2"
    QRNAS050001 
    QRNAS050003 
    QRNAS050004
    M45 
    M48 
    M52
    QRNAS050005 
    QRNAS050006 
    QRNAS050007
    99 880 9.10 5868 5.94
    5.83
    5.71
    160 
    158 
    154
    SSTAS060001
    (SST 6)
    2-1/4" 
    2-1/2" 
    2-3/4"
    QRNAS060001 
    QRNAS060003 
    QRNAS060004 
     
    M56 
    M60 
    M64 
    M68 
    M70
    QRNAS060005 
    QRNAS060006 
    QRNAS060007 
    QRNAS060008 
    QRNAS060009
    175 1560 16.14 10411 6.54
    6.30
    6.06
     
    1778 
    175 
    172 
    169 
    165
    SSTAS070001
    (SST 7)
    3" 
    3-1/4" 
    3-1/2"
    QRNAS070001 
    QRNAS070003 
    QRNAS070004
    M76 
    M80 
    M85 
    M90
    QRNAS070005 
    QRNAS070006 
    QRNAS070007 
    QRNAS070008
    289 2575 26.63 17176 7.13
    6.89
    6.65
    195 
    192 
    188 
    184
       
    •  
    •  
    •  
    •  

     

                   
                   
                     
                     
                     
                     
                     
                     
                     

     

     

     

     


     

         

     

























































































View Complete Details

Wind Tensioners

Tensioners have quality designed in with standard features that enhance durability and efficiency to get jobs done faster and safer. Quality Means Lower Life-Cycle Costs: Achieves 90% proof load requirement for ISO 898 Grade 10.9 bolts Fully enclose load cell eliminates debris in piston retraction mechanism Auto-engaging geared nut rotator Self-energizing, long life seals Enhanced Usability: Piston Stroke Indicator High pressure swivel coupling (optional on WSS & WSL) 1350 Bar maximum operating pressure Automatic piston retraction mechanism Designed with Safety in Mind: Overstroke prevention for safe operation WDD Series Robust gear drive Auto-engaging Geared Nut Rotator Small Diameter, high load 2-Stage hydraulic load cell Fast application using 1/2" drive   Cycle counter (optional) WSD Series   Robust Gear Drive Auto-engaging Geared Nut Rotator Low Height hydraulic load cell Fast application using 1/2" drive Cycle counter (optional)   WSS & WSL Series   Suitable for ISO Metric threaded, and All-Thread bars. Geared or Manual Nut Rotator Long & Short Stroke models Anti-slip grip surface High pressure swivel coupling (optional)  

  •       Stroke Max Load Hydraulic Area   Weight
    Order No. Metric Bolt Size 
    Stud Prot. 
    (mm)
    (in.) (mm) (lbs. tonf) (Kn) (in2) (mm2)  (lbs.) (kg)
    WDD1-M30 M30 63-70 0.27 7 52.49 467 53.60 3458 14.77 6.70
    WDD2-M33 M33 67-74 0.27 7 63.96 569 65.33 4215 16.75 7.60
    WDD3-M36 M36 71-80 0.40 10 75.42 671 77.03 4970 20.39 9.25
    WDD4-M39 M39 72-86 0.40 10 90.04 801 91.93 5931 24.47 11.10
    WDD4-M42 M42 80-92 0.40 10 104.1 926 106.27 6856 27.78 12.60
     
    WSD1-M30 M30 63-81 0.27 7 52.49 467 53.60 3458 14.55 6.60
    WSD2-M33 M33 67-86 0.27 7 63.96 569 65.33 4215 16.75 7.60
    WSD3-M36 M36 71-93 0.40 10 75.42 671 77.03 4970 19.40 8.80
    WSD4-M39 M39 72-95 0.40 10 90.04 801 91.93 5931 24.70 11.20
    WSD4-M42 M42 80-96 0.40 10 104.1 926 106.27 6856 26.90 12.20
     

    For Grade 75 ksi - All Thread Foundation Bolts

            Stroke Max Load Hydraulic Area Weight
    Load Cell Adapter 
    Kit **
    Bar Size Stud Prot. 
    (mm)
    (in.) (mm) (lbs. tonf) (Kn) (in2) (mm2) (lbs.) (kg.)
    WSS1 WSS1-10 #10 206 0.40 10 52.83 470 53.95 3481 12.65 5.74
    WSS1-11 #11 219 12.90 5.85
     
    WSL1 WSL1-10 #10 255 0.99 25 52.83 470 53.95 3481 19.84 9.00
    WSL1-11 #11 266 20.28 9.20

    For Grade 150 ksi - All Thread Foundation Bolts

            Stroke Max Load Hydraulic Area Weight
    Load Cell Adapter 
    Kit **
    Bar Size Stud Prot. 
    (mm)
    (in.) (mm) (lbs tonf) (Kn) (in2) (mm2) (lbs.) (kg.)
    WSS2 WSS2-125 1-1/4" 226 0.40 10 85.43 760 87.26 5630 18.08 8.20
    WSS2-138 1-3/8" 238 18.30 8.30
     
    WSL2 WSL2-125 1-1/4" 269 0.99 25 85.43 760 87.26 5630 27.12 12.30
    WSL2-138 1-3/8" 280 27.34 12.40
     

     









View Complete Details

Spreader Bolting tools

• Use to lift machines or as a clamp; spread concrete forms or rebar or preform straightening jobs. • Conforms to ASME B30.1 standard. • High strength alloy steel forged upper and lower jaws on HS2000. Jaws are spring return; retract automatically when pressure is released. No. HS2000-  1ton capacity spreader. Full 2, 000 lbs. capacity at 10, 000 psi with 4" spread. Can be "dead-ended" at 4" spread under full load. Needs only 9/16" clearance to engage jaws. No. HS3000-  1 1/2 ton capacity spreader. Full 3, 000 lb. capacity at 10, 000 psi with 11 1/2 spread. Greater than competitive units. Needs only 1 1/4" clearance to engage jaws. Can be "dead-ended" at 11 1/2" spread at full load.   Tested to conform to ASME B30.1 standard

  • Order 
    No.

    Capacity 
    (tons)

    Max. 
    Spread 
    (in.)
    Oil 
    Capacity 
    (cu. in.)
    Min. 
    Clearance 
    Required
    Weight 
    (lbs.)
    HS2000 1 4'' 0.63 9/16'' 4.8
    HS3000 1 1/2 11 1/2'' 3.50 1 1/4'' 22.0
     










View Complete Details

Aluminum Cylinder Base

Aluminum Cylinder Base  - For use when an enlarged cylinder base is needed or advantageous.  Attaches to bottom of RA556, RA556L, and RA5510 with four 3/8"-16 screws (included).  Serrated base for extra stability. 

  • Order No. Description Weight 
    (lbs.)
    208406 Aluminum 55 Ton Cylinder Base, 7" square. 
    For use with RA556, RA556L, and RA5510 cylinders.
    4.0
     



View Complete Details

Metric Adapters Accessories

Metric Adapters  Add metric capability to your Push-Puller® legs or forcing screws!  Four separate metric kits available with a variety of sizes for your Push-Puller® legs or forcing screws!  Each packaged in a convenient plastic organizer case.  CAUTION:  All the items shown may not withstand the full tonnage of the pullers they may be used with.

  • Metric Adapters 

     

    Order 
    No.
    Female End 
    (in.)
    Male End Length 
    (in.)
    Weight 
    (lbs.)
    8111 5/8" - 18 M6 x 1.0 2 1/4" 3.0
    8112 5/8" - 18 M8 x 1.0 2 1/4" 3.0
    8113 5/8" - 18 M8 x 1.25 2 1/4" 3.0
    8114 5/8" - 18 M10 x 1.25 2 1/4" 3.0
    8115 5/8" - 18 M10 x 1.50 2 1/4" 3.0
    8116 5/8" - 18 M12 x 1.25 2 1/4" 3.0
    8117 5/8" - 18 M12 x 1.75 2" 3.0
    8121 5/8" - 18 M14 x 1.5 2 1/4" 3.0
    8122 5/8" - 18 M14 x 2.0 2 1/4" 3.0
    8123 5/8" - 18 M16 x 1.5 2 3/4" 3.0
    8124 5/8" - 18 M16 x 2.0 2 3/4" 3.0
    8125 5/8" - 18 M20 x 1.5 2 3/4" 3.0
    8126 5/8" - 18 M20 x 2.5 2 3/4" 3.0




View Complete Details

RSS Cylinders - Cribbing Blocks

Convert Power Team “Shorty” RSS Series cylinders to mechanical cribbing devices; more stable than timber or other awkward, makeshift methods. Ideal for lifting applications such as structure moving. Reduces cribbing time dramatically. In effect, increases the stroke of the cylinder; stacking pads act as cylinder extensions:   Extend cylinder and insert lower supporting ring. Retract cylinder, insert a stacking pad. Extend cylinder again; pad increases cylinder stroke. Repeat process until all rings and pads are used.

  • Order No. Description Weight 
    (lbs.)
    CB30 Cribbing block set for use with No. RSS302; 30 ton cylinder 21.0
    CB50 Cribbing block set for use with No. RSS502; 50 ton cylinder. 29.3
    CB100 Cribbing block set for use with No. RSS1002; 100 ton cylinder. 66.2
    45589 Insertion handle is used for inserting rings and pads. 1.3

     


  • For Use With 30 Ton Cylinder No. RSS302 50 Ton Cylinder No. RSS502 100 Ton Cylinder No. RSS1002
    Order Number 30 Ton Set No. CB30 50 Ton Set No. CB50 100 Ton Set No. CB100
      Lower
    Ring
    Upper
    Ring
    Stacking
    Pad
    Lower
    Ring
    Upper
    Ring
    Stacking
    Pad
    Lower
    Ring
    Upper
    Ring
    Stacking
    Pad
    No. included in set 1 2 3 1 2 3 1 3 4
    Outside Diameter (in.) 4 1/2 4 1/2 2 3/4 5 1/2 5 1/2 3 3/8 7 25/64 7 25/64 4 3/4
    Inside Diameter (in.) 2 13/16 2 13/16 –– 3 29/64 3 29/64 –– 4 13/16 4 13/16 ––
    Height, each (in.) 2 9/32 1 51/64 1 25/32 2 7/32 1 23/32 1 11/16 2 1/8 1 3/4 1 23/32
    Total stacked height of rings in Set (in.)   5 7/16     5 3/16     6 7/8  
    Weight of Set (lbs.)   20     28     64  
    * Each set includes one Insertion Handle No. 45589 - 1/2'' Hex. x 18'' Long, 4'' Bend









View Complete Details

On-Off Motor Control

The following remote control switches will give you momentary “ON” control of your hydraulic pump. These switches are deadman type, spring loaded to the “OFF” position. They can be used with any Power Team electric hydraulic pump.                                          

  • Order  No. Description Weight 
    (lbs.)
    10461 Remote foot control, with 10 foot cord. 3.0
    25017 Remote hand control. Has a push button switch, with a 10 foot cord. 0.8
    203225 Remote hand control. Heavy-duty with single push button switch in a neoprene housing with 10 foot cord. Housing seals out dust, lint and liquids (unit is not submersible). 0.8
    251660 Remote foot control, with 10 foot cord. For use with the PE10 style pumps. 1.0

View Complete Details

Press Accessory Kits

Press Accessory Kit Make your Power Team press even more versatile with one of these accessory sets. These sets will eliminate makeshift set-ups. Many of these items can be used with pullers you already have.  

  •   A B C D E F G
    Order No. Use With 
    Press:
    V-Throat 
    Press Plate
    V-Blocks Pushing Adapter ‡ Pushing Adapter ‡ V-Pushing
    Adapter
    Single-Acting Cyls. Double-Acting Cyls. Pushing Adapter
    SPA10 10 Ton 1888 1890 (Pr.) 201923† 
    1/2" dia. shank
    201454† 3/4" dia. shank 34806† Included in Set  
    38597 38597
    SPA25 25 Ton 1889 1891 (Pr.) 34510† 
    3/4" dia. shank
    34511† 
    1" dia. shank
    34807† Included in Set  
    38953 38953
    SPA55 55 Ton 1892 (Pr.) 34755
    1" dia. shank
    34756
    1 1/2" dia. shank
    34808 Not Included 
    Order Separately
     
    37368 38954
      
    SPA100
      
    80/100 Ton
      
      
    1893 ** 
    (Pr.)
      
      
      
    36469
    Not Included 
    Order Separately
      
    21332
    43562
    46070 ***
    43563
    46070
    SPA200 150/200 Ton 207395
    (Pr.)
    44458
    2 1/4" dia. shank
    44457 None*
    * Pushing adapters thread directly into RD15013 and RD20013 cylinders. 
    ** V-blocks, No. 1893, are recommended for use with 80-ton Roll-Bed® press. Not recommended for use with 100-ton Roll-Bed® press. 
    *** For 80-ton Roll-Bed® press. 
    † Also, an Optional Accessories for use with CC5, CC10 & CC25 Hydraulic Clamps

    NOTE: Individual press accessories may be ordered separately. 

    ‡ CAUTION: Pushing adapters are designed for use with specific shaft sizes, and depending on the condition of the shaft ends, the adapter may not withstand the full press tonnage. Always use a protective blanket or other suitable guard when pressing.
     































View Complete Details

Universal Pump Cart

Mobilize your hydraulic pumps with the PC200. The rugged tubular frame can easily handle pumps weighing up to 200 lbs. With 12" wheels, the cart rolls easily. Just load the pump onto the cart and wheel it right to the job. The universal mounting hole pattern lets you handle a wide variety of Power Team pumps. Used on these pumps: PA60, PA64 and PA554 air/hydraulic pumps; PE55 series, PE183-2 and PE184-2 electric/hydraulic pumps; PE21, PQ60 and PQ120 series “Quiet” pumps; PG55 series gas engine/hydraulic pumps; and pumps with optional 5 and 10-gallon reservoirs; Nos. RP50, RP51, RP101 and RP103.

  • Order No. Description Weight 
    (lbs.)
    PC200 Universal pump cart with 12" wheels. 27.0

View Complete Details

Tilter Load Rotors

Whenever you have big, heavy components to move or position, nothing helps you get the job done easier and faster than the 6, 000 lb. “Tilter.”   For lifting or positioning components, Power Team’s heavy duty lifting slings are just right. The heavy-duty Load-Rotors®, when used with a crane or hoist, greatly reduce time and effort. A self-locking worm and gear set in the Load-Rotor® head permits rapid angle adjustment of the component being handled. *  Note:  Not to be used for overhead lifting.

  • Order No. Capacity 
    (lbs.)
    Gear Ratio Weight 
    (lbs.)
    LR2000 2000 34:1 9.0
    LR4000 4000 82:1 23.0
    LR6000 6000 82:1 73.0
    Order 
    No.
    Chain Size 
    (in.)
    Chain Lg. W/ 
    Swivel Hooks 
    (in.)
    Lifting 
    Eye Opening 
    (in.)
    Hex 
    Drive End 
    (in.)
    LR2000 1/4 56 1 1/4 5/8
    LR4000 5/16 65 1 3/4 5/8
    LR6000 5/16 65 1 5/8 5/8

     











View Complete Details

Capacity Puller Set

  • P55 Hand Pump, 1-Speed, .160 cu. in./stroke
  • RT302 Cylinder, 30 Ton, 2 1/2
  • 1070 Push/Pull Puller 30 Ton with 18
  • 1074 3-Jaw Puller 30 Ton
  • 1111 28
  • 41226 2-Jaw Puller Head 30 Ton
  • 1127 Bearing Pulling Attachment 30 Ton
  • 1166 Internal Pulling Attachment for PPH30
  • 9059 Gauge 4
  • 9670 Tee Adapter 1/4
  • 9767 Hose, Polyurethane .25
  • 9798 Half Coupler, Hydraulic, 3/8
  • 27198 Cylinder Speed Crank 30 Ton
  • 28229 Clamp Pushing Adapter 25 Ton 1.75
  • 34510 Clamp Pushing Adapter 25 Ton 0.75
  • 34758 Cylinder Adjusting Screw, 1-1/4
  • 308437OR9 Wooden storage box, 40 x 16 x 24
  • 8036 Puller Threaded Adapter 1

30 Ton Capacity Hydraulic Puller Sets  Just what you need for those big jobs.  Not only do you get a 30 ton hydraulic Push-Puller®, you also get a 2-jaw and 3-jaw hydraulic puller.  Plus, many popular accessories and the hardware to tackle the big jobs right away.  Order No.DescriptionWeight (lbs.) IPS30H 30T capacity hydraulic maintenance puller set. Includes hydraulics, pullers, wooden storage box and accessories listed in Specifications. 330 CAUTION:  All the items shown may not withstand the full tonnage specified.  Example: When an accessory with a 1 ton capacity is used with a 7 ton puller, the setup can be used only at a force of 1 ton.

View Complete Details

Hydraulic Press C Frame

Can be bench mounted or on optional pedestal base. Bench mount requires less than 1.5 sq. ft. of space; on optional pedestal, only 4 sq. ft. of floor space is needed. Open Throat® design makes loading and unloading of work easy. Cylinder head adjusts to three convenient working positions, providing up to 20 1/4" of “daylight.” Hydraulic cylinder delivers a 6 1/4" stroke and is driven by a P59 two-speed hand pump.

  • C-Frame Standard
    Order No. Cap. 
    (tons)
    Type of Cylinder Used Stroke Cylinder
    Model
    Speed** Type 
    Pump
    Pump
    Model
    Weight
    (lbs.)
    Advance Pressing
    SPM256C* 25 Single-Acting 6 1/4 '' C256C .129 
    in./stroke
    .03 
    in./stroke
    Hand P59 240
    SPX256C* 25 Single-Acting 6 1/4 '' C256C .129 
    in./stroke
    .03 
    in./stroke
    ___ ___ 240
    * SPM256C does not include No. 60846 pedestal base. 
    ** Typical performance based on pump specifications. Actual speeds may vary with operating conditions.


     

    Order No. Description Weight
    (lbs.)
    60846 Pedestal Base  – Provides a stable base for SPM256C. Includes a bracket for mounting the pump on the side of pedestal press. 76.0












View Complete Details

Universal Pullers

Enforcer 100 Series Adjustable jaws mean they always pull on a flat surface. Retaining chain holds jaws in place during positioning. Grip-O-Matic® feature means jaws grip progressively tighter as more pulling force is applied. 100 ton hydraulic cylinder is single-acting, spring return type with a maximum working pressure of 10, 000 psi. Lifting bracket allows puller to be lifted if the workpiece center is more than 36" off the floor. Adjusting screw allows operator to move vertical position of the puller. Spring loaded feature means Enforcer 100 will align itself on uneven pulls. Hydraulic pump is a 2-stage, high pressure unit controlled by remote hand switch with 25 foot cord. Tow bar provides puller with plenty of mobility. Pushing adapters have a diameter of 4 1/8" and 2 1/2".

  • ENFORCER 100
     

    Order 
    No.
    Description Weight 
    (lbs.)
    PH1002 100 ton, 2-jaw universal hydraulic puller.  Includes: 2-jaw Grip-O-Matic® puller, PE552S 2-speed electric/hydraulic power unit, C10010C 100 ton hydraulic cylinder with 10 1/4" stroke and six adapters. 890.0
    PH1002J Same as PH1002, but without hydraulic power unit. 825.0
    PE552S* Pump only. 1 1/8 hp, 115 volt, 50/60Hz, single phase, draws 25 amps at full load.  Also available in 220 volt, 50Hz   
     * For 220 volt, 50Hz applications, Order No. PH1002-220


     

    Order No. Vertical 
    Stroke 
    Adjust. 
    (in.)
    Overall 
    Length 
    (in.)
    Max. Thickness 
    Wordpiece
    Wheel 
    Dia.
    Power Source 
    Requirements
    PH1002 12-36 94 12 8 115v, 50/60hZ, 25 Amp Cap.
    PH1002J 12-36 94 12 8












  • Order No. Min. 
    Spread 

    (in.)
    Reach Min. 
    Spread 

    (in.)
    Max. 
    Spread 

    (in.)
    Reach Max. 
    Spread 

    (in.)
    Puller Jaw Tip Cylinder 
    Height 

    (in.)

    (in.)

    (in.)

    (in.)
    PH1002 15 42 48 34 1 2 1/4 5 10 1/4
    PH1002J 15 42 48 34 1 2 1/4 5 10 1/4



      

    Ram Extensions 

    Order 
    No.
    Adapter 
    Type
    Amount included 
    w/ puller

    (in.)

    (in.)

    (in.)

    (in.)

    (in.)
    44745 Push 1 4 1/8 13 1/2 2 1/2
    44766 Ext. 4 4 1/8 8
    303045 Push 1 4 1/8 3 1/2
     































View Complete Details

Blind Hole Puller Set

  • 24835 Forcing Screw
  • 24836 Forcing Screw Nut
  • 22185 Hammer 2½ lbs.
  • 208627 Shank & Tee Bar Assembly
  • 28250 Actuator Pin (1/8" dia.)
  • 28253 Actuator Pin (3/16" dia.)
  • 28256 Actuator Pin (½" dia.)
  • 41331 Bridge
  • 28323GY8 Metal Box

Removal of bearings, bushings, sleeves and other friction-fitted parts from blind holes can now be accomplished with ease. Set provides selection of expanding collets 5/16" to 1 3/4" I.D. Collet is placed through bore of part to be removed, then expanded with actuator pin so that lips of collet secure a positive grip for pulling. Pulling force is exerted by means of a forcing screw and bridge assembly or with a slide hammer.  

  • Order 
    No.
    Description Weight 
    (lbs.)
    981 Blind-hole puller set with slide hammer, forcing screw, bridge, actuator pins, collets, and storage box. 21.0
    Order No. Inch Range MM Range
    33856* 5/16" to 3/8" 8 to 9.5
    33857* 3/8" to 7/16" 9.5 to 11.1
    33858** 7/16" to 1/2" 11.1 to 12.7
    33859** 1/2" to 5/8" 12.7 to 15.9
    33860** 5/8" to 3/4" 15.9 to 19.1
    33861** 3/4" to 7/8" 19.1 to 22.2
    33862** 7/8" to 1" 22.2 to 25.4
    33863** 1" to 1 1/4" 25.4 to 31.7
    33864** 1 1/4" to 1½" 31.7 to 38.1
    33865** 1½" to 1 3/4" 38.1 to 44.4
    * Use with 1/8" actuator pin. 
    ** Use with 3/16" actuator pin. 
    *** Use with ½" actuator pin.

     





View Complete Details

Hydra Grip-O-Matic Puller Kit

Hydra Grip-O-Matic® pulling system  - These pullers are ideal for pulling a wide variety of press-fitted parts including bushings, bearings, wheels, gears and pulleys. Grip-O-Matic® pullers have been rigorously tested for top performance and reliability. PH82K is a complete pulling system which includes a hydraulic power module, 2-way puller head, jaws, legs and bearing splitter attachment; all contained in a convenient carrying case.   You get the world’s most copied puller design; the harder the pulling force, the tighter the jaws grip for secure holding force. Power Team pullers are tested for top performance and reliability at maximum capacity and jaw spread. Removing a wide variety of gears, bearings, bushings, pulleys and other press-fitted parts becomes a routine task. Easily metered release valve control knob. Spring loaded live centering cone. Bladder type oil reservoir. Rapid adjustment. Use with 2 or 3 jaws. Supplied with a sturdy storage/carrying case. Features Power Team’s exclusive Marathon Limited Lifetime Warranty

  • Order No. For Use with Pullers Type Description Weight 
    (lbs.)
    K82 PH83C Includes 2-way puller head, 2 jaws, 2 threaded legs and sturdy carrying/storage case. 13.7
    K83 PH83C Includes 2/3 way puller head, 3 jaws, 3 threaded legs (5/8-18 thread) and sturdy carrying/ storage case. Also can be used with  Bearings and Pulley Attachments (1123, 1124, 1130). 23.0

View Complete Details

Compact Torque Wrench Pump

  • PE39YED1PR 110/115 VAC - 50/60 Hz
  • PE39YED1BPR 110/115 VAC - 50/60 Hz with cooling option
  • PE39PED1PR* 220/230VAC - 50/60 Hz
  • PE39PED1BPR* 220/230VAC - 50/60 Hz with cooling option

Compact but powerful Torque Wrench Pump The SPX PE39 is compact and capable of being used in a vertical or horizontal orientation. It is based on proven pump design for reliability in rugged torque wrench applications to support operation and maintenance requirements. Quality means Lower Life-Cycle Costs: Over 100, 000 cycles Continuous duty up to 50Ë�C / 122Ë�F ambient (optional cooling kit) Proven design: proven reliability Enhanced Usability: Light weight and portable: 39 lbs. / 17.7 kg (without oil) Vertical or horizontal operation Removable control pendant (15 ft/ 5 m cord length) Removable 4" calibration capable gauge Universal Motor for reduced voltage applications (up to -20% nominal voltage) 4-way valve (not for lifting applications) Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Fixed 1500 psi / 103 Bar pressure retract relief valve Weight:  Lbs/Kg:  39 lbs / 17.7 kg (without Oil)  Maximum Oil Capacity:  (non-vented reservoir)  0.5 Gallons / 1.89 L (to fill line)  0.4 Gallons / 1.51L (useable)  Operating Environment: Temperature: -13°F to 122°F / -25°C to +50°C  (If temperatures are at extremes of the operating range, it is recommended to use hydraulic oils that are rated for those temperatures. Refer to service manuals and cooling options)  Sound Level:  87 – 92 dB  Pressure:  0 – 10, 000 psi (0 – 690 bar)  Typical Flow: 225 cu-in/min – 39 cu-in/min  3.7 L/min – 0.64 L/min  Power: 1.3 HP Universal Motor  ( 115 volt – 50/60 Hz ) 14.5 amps  ( 230 volt – 50/60 Hz ) 7.2 amps 

  • Length Width Height
    (in.) (kg.) (in.) (kg.) (in.) (kg.)
    13.8 35.0 10.8 27.4 23.7 60.0
View Complete Details

HB Intensifier pump

CONVERTS LOW-PRESSURE PORTABLE HYDRAULIC PUMPS OR ON-BOARD HYDRAULIC SYSTEMS, INTO HIGH PRESSURE POWER SOURCES. Applications include utilities, railroads, construction, riggers and others. Operates single or double-acting cylinders, jacks, and tools such as crimpers, spreaders, cable cutters, or tire tools. Version for use with double-acting torque wrenches available. May be used to operate two separate, single-acting tools (with integral valves) independently, without need for additional manifold. Control valve included. Other Power Team valves available as an option to suit your specific application, if needed; consult factory. Compact and rugged for use inside a utility vehicle aerial bucket or stowing in a vehicle. No reservoir level to maintain; uses low pressure system as oil supply. Has 3⁄8" NPTF ports; compatible with standard fittings for low and high pressure systems.

  • Order No. Output Flow @ 10,000 (psi) Weight (lbs.)
    HB44 44 cu. in./min. 16


     

    Order No. For Use with Cyl. Type Description
    Valve Type
    Valve No. Output Flow 
    Valve Function
    Input Flow Range  
    (gpm)
    Input Flow Pressure 
    (psi)
    Output Flow Range 
    (gpm)
    HB443 Single-Acting Hydraulic intensifier for single-acting systems 3-Way 
    3-Position
    9520* Advance Hold Return 0-10 300-2,000 0-2.5
    HB444 Single-Acting/
    Double-Acting
    Hydraulic intensifier for double-acting systems 4-Way 
    3-Position
    9506* Advance Hold Return 0-10 300-2,000 0-2.5
    HB445-RR Double-Acting Hydraulic intensifier for double-acting torque wrench tools 4-Way 
    3-Position
    - Advance Hold Return 0-10 300-2,000 0-2.5
    * Posi-Check® valve design, Posi-Check® guards against pressure loss when valve is shifted from "advance" position to "hold" position. 
    † For maximum efficiency, recommended input flow is 5 gpm at a maximum pressure of 2,000 psi.  Higher flows and/or pressures must be compensated for at the system pump (e.g., relief valve, variable flow devices, etc.)
    Order 
    No.

    (in.)

    (in.)

    (in.)

    (in.)

    (in.)

    (in.)
    HB44 8 5/8 14 1/2 6 1/8 2 3/4 4 1/2 10 1/2

     



















View Complete Details

Infinite Stage Pump

  • PE45LEE4PRS 110/115VAC - 50/60 Hz, single port
  • PE45YEE4PRS 110/115VAC - 50/60 Hz, single port, plug
  • PE45YEE4CPRS 110/115VAC - 50/60 Hz, single port, plug, with cooling option
  • PE45YEE4CMPRS 110/115VAC - 50/60 Hz, 4 port, plug, with cooling option
  • PE45YEE4MPRS 110/115VAC - 50/60 Hz, 4 port, plug
  • PE45LEE4CPRS 110/115VAC - 50/60 Hz, single port, with cooling option
  • PE45LEE4CMPRS 110/115VAC - 50/60 Hz, 4 port, with cooling option
  • PE45LEE4MPRS 110/115VAC - 50/60 Hz, 4 port
  • PE45PEE4PRS 220/230VAC - 50/60 Hz, single port
  • PE45PEE4CPRS 220/230VAC - 50/60 Hz, single port, with cooling option
  • PE45PEE4CMPRS 220/230VAC - 50/60 Hz, 4 port, with cooling option
  • PE45PEE4MPRS 220/230VAC - 50/60 Hz, 4 port

The SPX PE45 is an Infinite Stage Pump which increases productivity on the job by providing continuous pressure for up to 2x the speed of typical 2-stage pumps. Jobs get done faster and easier. Quality means Lower Life-Cycle Costs: Over 100, 000 cycles Continuous duty up to 50˚C / 122˚F ambient (optional) Proven design: proven reliability Enhanced Usability: Portable: 71 lbs. (without oil) Up to four tools on one pump Removable control pendant (15 ft / 5 m cord length) Improved oil filtration Universal Motor for reduced voltage applications (up to -20% nominal voltage) 4-way valve (not for lifting applications) Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Fixed 1500 psi / 103 Bar pressure retract relief valve Maximum Oil Capacity:  (vented reservoir)  1.5 Gallons / 6.75 L (to fill line)  1.12 Gallons / 5.1 L (useable)  Operating Environment:  Temperature: -13°F to 122°F / -25°C to +50°C  (If temperatures are at extremes of the operating range, it is recommended to use hydraulic oils that are rated for those temperatures. Refer to service manuals and cooling options)  Sound Level: 87 – 92 dB  Pressure: 0 – 10, 000 psi (0 – 690 bar)  Typical Flow: 575 cu-in/min – 48 cu-in/min 9.4 L/min – 0.8 L/min  Power:  1.8 HP Universal Motor  ( 115 volt – 50/60 Hz ) 17 amps  ( 230 volt – 50/60 Hz ) 8.5 amps 

  • Length Width Height  Weight 
    (without oil)
    in. cm in. cm in. cm lbs. kg.
    17.7 45.0 14.0 35.6 cm 26.6 67.5 71.0 32.2

View Complete Details

Power Pack Tensioner Pumps

STANDARD POWER PACK (HPUTP150001K) Typical uses: Topside bolt tensioners, hydraulic nuts   1500 bar (21, 750 psi) max working pressure (restricted) Calibrated 6" (150 mm) Pressure gauge Flow Rate up to 44 cu.in/min (0.72 liters/min) Dual oil outlets with quick-connect no spill couplings Pneumatic Filter/Regulator/Lubricator Air Consumption 28 cfm (800 liters/min) 2.5 Gal. (9.5 Liter) polyethylene reservoir Stainless Steel carrying frame HIGH FLOW POWER PACK (HPUTP15002K) Typical uses: Subsea and large tensioner applications 1500 bar (21, 750 psi) max working pressure (restricted) Calibrated 6" (150 mm) Pressure gauge Flow Rate up to 70 cu.in/min (1.14 liters/min) Dual oil outlets with quick-connect no spill couplings Pneumatic Filter/Regulator/Lubricator Air Consumption 56 cfm (1600 liters/min) Stainless Steel carrying frame

  •   
    Order No.
    Width Length Height Weight
    in. mm. in. mm. in. mm. lbs. kg.
    HPUTP150001K 16.5 420 16.5 420 15.5 390 42.0 19
    HPUTP150002K 18.0 465 21.0 530 20.0 515 51.0 23

View Complete Details

BAR Tensioner Pump

  • PE8LXX3L 100/115VAC 50/60 Hz
  • PE8PXX3L 220/230VAC 50/60 Hz

1500 BAR Electric pump Light weight (45.5 LBS/ 20.6 KG without oil) and compact for portability and working in small spaces. Low Current draw allows for remote location use Heavy duty drive train provides durability for rapid and repetitive cycling applications. Quality Means Lower Life-Cycle Costs: Over 100, 000 cycles Continuous Duty (even at 50deg. C/ 122 deg.F ambient) Proven design: proven reliability Enhanced Usability: Light weight and portable: 45.5lbs/20.6kg (without oil)  Removable Control Pendant (15ft/5m) cord length Removable 4" Calibration capable gauge Universal Motor for reduced voltage applications (up to -20% nominal voltage) Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Maximum Oil Capacity:  (vented reservoir)  1.0 Gallons / 3.8 L (to fill line)  0.9 Gallons / 3.4 L (useable)  Operating Environment: Temperature: -13°F to 122°F / -25°C to +50°C  (If temperatures are at extremes of the operating range, it is recommended to use hydraulic oils that are rated for those temperatures. Refer to service manuals and cooling options)  Sound Level: 82 – 86 dB A  Pressure: 0 – 21, 750 psi (0 – 1500 bar)  Typical Flow: 168 cu-in/min – 8 cu-in/min  2.7 L/min – 0.13 L/min  Power: 0.5 HP Universal Motor  (115 volt – 50/60 Hz) 11 amps  (230 volt – 50/60 Hz) 5.5 amps 

  • Length Width Height Weight 
    (without oil)
    in. cm. in. cm. in. cm. lbs. kg.
    14.1 35.8 7.8 19.8 16.3 41.4 45.5 20.6

View Complete Details

Ratcheting Chain

Special head design allows you to turn wrench in either direction. Ratcheting action makes it possible to re-grip without removal. For parts of most any size and shape.  

  • Order No. Description Weight 
    (lbs.)
    7400 Chain wrench, cap. 1/2" to 4 3/4" O.D. (Capacity= 333 ft. lbs.) 2.0
    7401 Chain wrench, cap. 3" to 6 3/4" O.D. (Capacity= 666 ft. lbs.) 5.0
    209199 Replacement chain with pin for No. 7400 chain wrench (16" long).
    209200 Replacement chain with pin for No. 7401 chain wrench (24" long).

     


View Complete Details

Adjustable Gland Nut tools

Designed to handle 2" to 6" dia. hydraulic cylinder gland nuts on many construction vehicles. Fits 1/4" and 5/16" dia. pin holes; features a 3/4" sq. drive.  

  • Order No. Description Weight 
    (lbs.)
    1266 Adjustable gland nut wrench. 3.0
    204928 Replacement pin for No. 1266

View Complete Details

Seals Picks

Even the seemingly simple job of removing and installing “O” ring seals can be difficult without the aid of the proper tool. The 7312 all metal “O” ring seal pick does the job with ease. Two special picks in set No. 7103 get right to the trouble areas.    

  • Order No. Description Weight 
    (lbs.)
    7402 “O” ring seal pick. 0.1
    7103 Set of two “O” ring seal picks. 0.1
     


View Complete Details

compression tools

   Compression Tools - Single or Double Acting Large capacity for transmission and distribution applications Easy die set installation Capacity for U- or shell-type dies ( H-types require conversion kit for 100 series) Double acting conversion kit included Hinged flip-top head Carrying handles for portability Pressure matched quick-couplers supplied Carrying Case is included with 60 and 100 ton The 60-Ton Series Single or Double Acting Portable Hydraulic Compression Tool is precision designed and unsurpassed in the industry. This tool will provide years of dependable service. The compression tool develops 60 Tons of force at 10, 000 psi for the installation of electrical compression fittings. A special piston design facilitates operation in single or double acting mode by removing the vent plug from the upper port and substituting the quick-coupler, utilizing a 4-way control valve equipped pump at a high-pressure safety relief valve setting of 10, 000 psi. The 100-Ton Series Single or Double Acting Portable Hydraulic Compression Tool is designed for the installation of compression fittings. This precision engineered compression tool develops 100 tons of force at 10, 000 psi.

  • Order No. Crimping Force U.S. 
    (tons)
    Operating Pressure 
    (psi)
    Crimping Capacity 
    Copper/Aluminum
    Weight 
    (lbs.)
    60-TON S/DC 62.8 10,000 1590 72.0
    60-TON LS-C 62.8 10,000 1590 60.0
    100-TON S/DC 100.0 10,000 up to 3.25" outside diameter of connectors 213.0
     
    Order No. Overall Length 
    (in.)
    Head Width 
    (in)
    Height 
    (in.)
    60-TON S/DC 11.31 6 17.04
    60-TON LS-C 11.31 6 17.04
    100-TON S/DC 15.25 12.75 19.82
     

     










View Complete Details

Choosing The Right Valve

  • STEP 1 Select the hydraulic cylinder that best suits the application.
  • STEP 2 Select the series of hydraulic pump with adequate oil output and reservoir capacity to power cylinder.
  • STEP 3 Select pump within series with the valve option that best matches cylinder, pump and application.  

CONSIDERATIONS: Will the valve be used with single or double-acting cylinder? Will the valve be mounted on the pump, away from the pump or directly into the hydraulic lines? Will the valve be manually operated or is remote control preferred? Is independent control of multiple cylinders, or hydraulic tools preferred? What directional control and pressure control valve functions are needed for the application?   Basic valve types include manually operated, air or solenoid operated and pilot operated. Special application valves for pre-stressing and post-tensioning are also offered. IN-LINE HYDRAULIC VALVES Load Lowering Valve  - Provides precision metering for controlled return of the cylinder pistion.   Sequence Valve  - Used when a cylinder in a multiple cylinder application must advance before any other.   Pressure Reducing Valve  - Permits independent pressure control to two or more clamping systems operated by a single power source.   Shut-off Valve  - For fine metering of hydraulic oil. Several may be used to control multiple single-acting cylinders.   Check Valve  - Permits flow of hydraulic oil in one direction only.   Pressure Relief Valve  - Used at remote location in a hydraulic circuit where maximum pressure requirements are less than the setting of the basic overload valve in the pump. Protects a hydraulic system against over pressurization.   Metering Valve  - Restricts surges by restricting flow to a certain level; when flow subsides, valve reopens automatically. For systems using large cylinders or extended lengths of hose.   Pressure Regulator Valve  - Permits external adjustment of operating pressures at various values below the internal relief valve setting of the pump.

  • Order No. Cylinder 
    Application *
    Operation Valve Type Volt Advance/
    Return
    Advance/
    Hold Return
    Posi-Check® Feature Weight (lbs.)
    9500 S.A. & D.A. Manual 4-way, 3 Pos. Tandem Center No Yes No 4.2
    9501 S.A. & D.A. Manual 4-way, 3 Pos. Closed Center No Yes No 4.2
    9502 S.A. Manual 3-way, 3 Pos. Closed Center No Yes Yes 4.2
    9504 S.A. & D.A. Manual 3/4-way, 2 Pos. Yes Yes No 4.2
    9506 D.A. Manual 4-way, 3 Pos. Tandem Center No Yes Yes 5.1
    9507 D.A. Manual 4-way, 3 Pos. Closed Center No Yes Yes 5.0
    9511 S.A. & D.A. Manual 4-way, 3 Pos. Open Center Yes Yes No 4.2
    9512 D.A. Solenoid 4-way, 3 Pos. Tandem Center 24 No Yes Yes 18.1
    9513 D.A. Solenoid 4-way, 3 Pos. Tandem Center 115 No Yes Yes 18.1
    9516 D.A. Solenoid 4-way, 3 Pos. Tandem Center 12DC No Yes Yes 18.1
    9517 S.A. Manual 2-way, 2 Pos. No Yes No 3.2
    9519 D.A. Solenoid 4-way, 3 Pos. Tandem Center 230 No Yes Yes 18.1
    9520 S.A. Manual 4-way, 3 Pos. Tandem Center No Yes Yes 5.1
    9522 D.A. Solenoid 4-way, 3 Pos. Open Center 230 Yes No No 15.5
    9523 S.A. Pilot Operated Solenoid 3-way, 2 Pos. 230 Yes No No 8.2
    9552 S.A. & D.A. Solenoid 3/4-way, 2 Pos. 230 Yes No No 14.6
    9553 S.A. Pilot Operated Solenoid 3-way, 2 Pos. 24 Yes No No 8.2
    9569 S.A. Solenoid 3-way, 2 Pos. 24 No Yes No 9.6
    9570 S.A. Solenoid 3-way, 2 Pos. 230 No Yes No 9.6
    9572 S.A. & D.A. Solenoid 3/4-way, 2 Pos. 24 Yes No No 14.6
    9576 S.A. Manual 3-way, 3 Pos. Metering Tandem Center No Yes No 8.5
    9579 S.A. Solenoid 3-way, 2 Pos. 115 No Yes No 9.6
    9582 S.A. Manual 3-way, 2 Pos. No Yes No 2.5
    9584 S.A. Manual 3-way, 2 Pos. No Yes No 1.8
    9589 S.A. Pilot Operated Solenoid 3-way, 2 Pos. 115 Yes No No 8.2
    9590 D.A. Solenoid 4-way, 3 Pos. Open Center 115 Yes No No 15.5
    9592 S.A. & D.A. Solenoid 3/4-way, 2 Pos. 115 Yes No No 14.6
    9594 S.A. & D.A. Air 3/4-way, 2 Pos. No Yes Yes 11.0
    9599 S.A. Pilot Operated Solenoid 3-way, 3 Pos. Tandem Center 24 No Yes Yes 14.0
    9605 S.A. Pilot Operated Solenoid 3-way, 3 Pos. Tandem Center 115 No Yes Yes 14.6
    9609 S.A. Pilot Operated Solenoid 3-way, 3 Pos. Tandem Center No Yes No 8.7
    9610 S.A. Auto Pilot Operated 3-way, 2 Pos. Yes No No 4.2
    9610A S.A. Manual 2/3-way, 2 Pos. No Yes No 4.4
    9615 D.A. Solenoid 4-way, 3 Pos. Open Center 24 Yes No No 15.5
    9628 S.A. & D.A. Manual Post Tensioning Special No No 5.4
    9632 S.A. & D.A. Manual Post Tensioning Special No No 13.6
    * “S.A.” represents single-acting cylinders, “D.A.” represents double-acting cylinders
       
     



View Complete Details

Load Lowering Valve

Application:  Precision metering for controlled cylinder piston return.  Operation:  Permits free flow when extending cylinder, built-in pressure relief and Posi-Check® locks and holds load in raised position until operator opens valve. May be pre-set to provide consistent metered return, or operator may select rate of return with each actuation. Has 3/8" NPTF ports.  NOTE:  Pressure relief valve setting is 12, 000 psi. Operating pressure is 10, 000 psi and max. flow rate is 5 gpm.  CAUTION:  To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) or Counter Balance Valve (No. 9720) in conjunction with the directional valve used in your application.                                    

  • Order No. Cylinder 
    Application *
    Operation Valve Type Volt Advance / Return Advance / Hold Return Posi-Check® Feature Weight (lbs.)
    9596 S.A. Manual Load Lowering Valve 2.1
    * “S.A.” represents single-acting cylinders

View Complete Details

Post-Tensioning Multi-Strand

TWIN” 4-WAY/3-POSITION (TANDEM CENTER) MANUAL VALVE Application  – Multi-strand, double-acting stressing jacks with an auxiliary seating cylinder.  Actuation  – Dual lever operated, detent positioned.  Operation  – With valves “A” and “B” in center position, pump is started; cable is inserted into stressing tool. Valve “A” is placed in “Stress” position; cylinder extends to tension cable. Pump pressure controls force exerted by tensioning cylinder in this position. “Stress” port is checked internally, and can only be released by building pressure in the valve “B” return position. When desired cable tension is achieved, valve “A” is placed in valve “B” position and valve “B” in “Seat” position. Seating portion of cylinder will be pressurized to seating pressure controlled by “Seat” relief valve (factory set to 3, 900 psi). Valve “B” is shifted to “Return” position, which is pressure controlled and will not exceed 2, 200 psi. “Return” portion of stressing tool should be pressurized and will release “Stress” port when pressure reaches 15% of “Stress” port pressure. “Stress” port will remain open and cylinder will return as long as pressure differential is maintained. “Stress” and “Seat” ports are open to reservoir. When cylinder has fully returned, both valves are shifted to “Center” position and oil will be directed to reservoir. Maximum pressure setting for the “Seat” relief valve is 6, 000 psi. Used on these pumps:  PA17*, PA46*, PA55, PE17*, PE21*, PE30, PE46*, PE55, PE84, PE120, PE200, PE400, PG30*, PG55, PG120, PG400, PQ60 and PQ120 series.*  * These pumps may have reduced first flow stage characteristics due to internal valve restrictions.  CAUTION:  To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) or Counter Balance Valve (No. 9720) in conjunction with the directional valve used in your application.   IMPORTANT:  Conversion kit 251528 must be used when mounting any of the valves on PA17 or PE17 pumps.  IMPORTANT:  When ordering any valve for a PE30 or PG30 series pump, ½” longer mounting screws are required.  For valves 9504, 9584, 9610 and 9610A, order four 12001 cap screws.  For valve 9582, order two 12001 and two 10856 cap screws.  

  • Order No. Cylinder 
    Application *
    Operation Valve Type Volt Advance/ Return Advance / Hold Return Posi-Check® Feature Weight (lbs.)
    9632 S.A. & D.A. Manual Post Tensioning Special No No 13.6
    * “S.A.” represents single-acting cylinders, “D.A.” represents double-acting cylinders
     


View Complete Details

LD Series Meter Boot and Trigger Guards

Available for  LD Series Meters. Black boot and guard is standard, also available in red, blue, green and yellow.      

View Complete Details

Foundation Repair Pump

Electric 2-Stage Pump CSA approved model available Drip proof universal motor Filtered filler/breather cap Liquid filled gauge Carrying handle 2.5-gallon metal reservoir 525 cu. in. usable oil Oil flow at max. pressure: 100 cu. in./min.

  • Order 
    No.
    Electric Motor Supply voltage Noise Level @ Idle/Maximum Pressure (DBA)
    PE1204FR 1 1/8 hp; 12,000 RPM; 25 amps Max; 50/60 Hz; Single Phase 115 VAC 80/85
    PE1204FR-230 1 1/8 hp; 12,000 RPM; 14 amps Max; 50/60 Hz; Single Phase 230 VAC

     


View Complete Details

Pump-Mounted Manifolds


Tell Us What are you looking for? Will call you back

Contact Us

  • Rounak Chindalia
  • C-23, Punit Industrial Premises Co-op Society Limited Plot 11a-11d, Midc, Ttc Area, Thane Belapur Road, Turbhe, Navi Mumbai - 400 705., Mumbai, Maharashtra - 400053, India