VDIV10:1 Voltage Divider The VDIV10:1 divides the sensor's signal voltage by a factor of 10. Increased input settling time may be necessary to accommodate the relatively high resistance of the voltage divider. The resistors are 0.02% 10 and 90 kohm. Features Connects directly into datalogger input terminals; "prongs" on lower surface are secured into datalogger screw terminals Makes accurate measurement of sensors with larger voltage outputs simple; sensors are measured with a voltage measurement instruction Specifications Division Ratio: 10:1 Resistors: 10 kohm and 90 kohm Ratio Tolerance (@ 25C): 0.02% Power Rating per Element: 0.1 W @ 70C Maximum Ratio Temperature Coefficient (0 to 70C): 2 ppmC VDIV2:1 Voltage Divider The VDIV2:1 divides the sensor's signal voltage by a factor of 2. Increased input settling time may be necessary to accommodate the relatively high resistance of the voltage divider. Both resistors are 0.02% 10 kOhms. Features Connects directly into datalogger input terminals; "prongs" on lower surface are secured into datalogger screw terminals Makes accurate measurement of sensors with larger voltage outputs simple; sensors are measured with a voltage measurement instruction Specifications Division ratio: 2:1 Resistors: 10 kOhm and 10 kOhm Ratio Tolerance (@ 25C): 0.02% Power Rating per Element: 0.1 W @ 70C Maximum Ratio Temperature Coefficient (0 to 70C): 2 ppmC
Beijing, China
Write a Review
Jack (Beijing Channel Scientific Instruments Co.,Ltd.)
Share us via
