chongqing gold co ltd

chongqing, China

Introduction:single wire and cable vertical burning tester is themost widely used and low cost of cable fire performance test equipment; single wire or cable burning tester meet the national standard gb t18380.11-2008 iec60332-1-1: 2004 requiremen. It is to test cable , flameretardant insulation layer under fire conditions applicable for testing wireand cable in overheating, overcurrent and other non-normal state. It can beused in vertical or fiber optic wire and cable flame spread test, while testunder fire conditions dettol matter combustion conditions. International standards: iec 60332-1-1, 2, 3en 50086-1-1994gbt 18380.11, 12-2008 features:1, the touch screen intelligent control system; english user interface;2, the system automatic ignition, automatic timing, automatic datastorage;3, the test section and the control section is conbined design in onebox for operation;4, stainless steel test box, the internal cavity size: height 1200mm, width 300mm, depth of 450mm;6, a pre-mixed burner, an inner diameter of 12 0.5mm, length is 100mm. 1kw hybrid standard burner, which provides accurate test fire source;7, the flame burning applied time and hold time can range from 0 to 99 minutes99 seconds range adjustment. Automatic control of the testing process.8, import needle vavle precisely adjust the flame height, according tostandards, thef blue flame height is 50mm 60mm, total height 170mm 190mm9, the gas flow rate is controlled by needle valve10, equipped with a steeless flame height caliper.Specifiction:size 600(w)450(d)1250(h)mmgas pressure 0.1mpapower ac220 v +- 10v 50hz;weight 60kgmodel gd18380agas purity propane> 95%; compressed air

Introduction:Cable corrosion test apparatus is used to test the acidity of the gas that released during combustion from cable or optical cable components material; The equipment is designed and produced on the basis of GBT 17650 and IEC 60754.The cable material is processed by prius tube furnace, and then the pH value and conductivity of the gas that generated in combustion process are measured, so that the cable material of acidic, as well as concentration of halogen acid gas volume, PH, conductivity, etc, can be determined.International standards: 1. IEC 60754-1 Ed. 2.0 b:19942. IEC 60754-2 Ed. 1.0 b:1991 3. GBT 17650 Features:1, The tester designed with optimized structure, logical layout and easy to operate.2, Al the fixtures are made of stainless steel.3, The effective length of the tube-type furnace is 500600mm, inner diameter is 4060mm, with adjustable electric systems.4, Equipped with imported thermocouple from United States.5, The size of the combustion boat is length 45100mm, width 1230mm, depth 510mm.6, The electrical conductivity measuring range is 0.01uSmm100uSmm.7, The control system using an electronic temperature control, intelligent control tube furnace temperature.8, Equipped with two gas collection bottles. Specifiction: Size 1, 500 (W) x 500 (D) x 600 (H) mmTimer IEC 60754-1 or IEC 60754-2 time measurement device. Power AC 220V, 50 60Hz, 15AWeight 60KGModel GD17650