Chongqing Gold M & E Equipment Co. Ltd

Chongqing, China

Gd-261b Semi-auto Pmcc Flash Point Tester (digital Display) purposethe Instrument is Designed and Made as per the National Standard Gb/t261 test Methods for Flash Point of Petroleum Products (closed Cup Methods). It is Used to Determine the Lowest Temperature of a Petroleum Product Sample When the Mixture of Sample Vapor and Air Around the Sample Contacts and Flashes When Heated in a Closed Cup Under Stipulated Conditions. the Lowest Temperature is the Flash Point of the Sample. adopt Microprocessor Techniques and Equipped with Advanced Software, It Can Control Temperature, Stir Sample, Ignite, Detect, and Print Out Test Data Automatically. It Has a Six Digits Display. main Parameters(i) Operation Condition1. Ambient Temperature: +10+30;2. Relative Humidity: < 80%;3. Power Supply: Ac 220v10, 501hz;(ii) Temperature Measurement1. Measurement Range: Ambient Temperature250;2. Accuracy: 0.2%;3. Resolution: 0.1 ;4. Repeatability:(1) Flash Point is Lower Than 104 : Error is 2 ;(2) Flash Point is Higher Than 104 : Error is 4 ;(iii) Basic Parameters1. Interval for Flame Application(1) Flash Point is Lower Than 104 : 1 ;(2) Flash Point is Higher Than 104 : 2 ;2. Temperature Rising Rate: as per Gb/t261-83;3. Stirring Speed: 105 Rpm4. Ignition Mode: By Gas Flame (4 Mm);5. Total Power Consumption: Not More Than 300 W;6. Dimension: (1) Main Case: 360110300 (mm);(2) Measurement Case: 320260200 (mm);7. Net Weight: 10 Kg;

GD-261 PMCC Flash Point Tester Purpose The instrument is designed and made as per the National Standard of Peoples Republic of China GB/T261-2008 Test Methods for Flash Point of Petroleum Products (Pensky-Martens Closed Cup Methods). It is suitable to determine closed cup flash point of petroleum products having a flash point higher than 40 as per GB/T261-2008. Main technical specification and parameters1. Power supply: AC 220V10%, 50 Hz;2. Heating device:(1) The furnace is made of SiC materials; its power is 600 W;(2) Heating power is adjustable in the range of 0600W;3. Sample temperature rising rate: 112 per minute, manually controlled;4. Electric stirring device:(1) Stirring motor: 45TYZ Motor;(2) Driving device: by a soft shaft;(3) Stirring blade specification: 840 mm;5. Stirring speed: As per the requirement of GB/T261-2008;(1) 90120 RPM for procedure A;(2) 25010 RPM for procedure B;6. Standard oil cup: As per the requirement of GB/T261-2008;(1) Inner diameter: 50.750.8 mm;(2) Depth: 55.756.0 mm;(3) Depth of Marked line on the oil cup: 33.934.3 mm;(4) Oil sample cubage: about 70 ml;7. Ignition device (Flame application device): (1) Ignition source: Coal gas (or other civilian combustible gas);(2) Aperture of ignition device: 0.8 mm;8. Thermometer: Rod type Mercury Thermometer, as per GB/T261-2008;(1) Temperature range: -5110, Each scale division is 0.5 ;(2) Temperature range: 20150, Each scale division is 1.0 ;(3) Temperature range: 90370, Each scale division is 2 ;9. Ambient temperature: 35;10. Relative humidity: 85;11. Total power consumption: not more than 650 W;

Gd-3536 Cleveland Open Cup Flash Point Tester purposethe Instrument is Designed and Made as per the National Standard of People Republic of China Gb/t3536-2008 test Methods for Flash and Fire Point of Petroleum Products (cleveland Open Cup Methods), and the Company Standard of Shanghai Q/yxyy15 syd-3536 Cleveland Open Cup Flash Point Tester. It is Suitable to Determine Flash Point and Fire Point of Petroleum Products Having a Flash Point Higher Than 79 , Excepting Fuel Oils. main Technical Specification and Parameters1. Power Supply: Ac 220v10%, 50 Hz;2. Heating Device: It is a Quartz Tube Heater, So There is No Flame Appears. Explosion Protective; Its Power Can Be Continuously Adjusted in the Range of 0600w;3. Flame Application Device: Automatically Scan;4. Thermometer: -6400; Each Scale Division is 2 ; as per Gb/t514;5. Ignition Device: (1) Ignition Source: Coal Gas (or Any other Combustible Gas);(2) Spout Aperture: 0.60.8 Mm;6. Ambient Temperature: -1050;7. Relative Humidity: 85%;8. Total Power Consumption: Not More Than 650 W.

GD-267 Open Cup Flash Point Tester The instruments is designed and made as per the National Standard GB/T267 Test Methods for Flash Point and Fire Point of Petroleum Products (Open Cup Methods) and Industry Standard of Petrochemical SH/T0318 Technical Requirements for Open Cup Flash Point Tester. It is used to determine the flash point and fire point of lubricating oil and Dark petroleum products. Technical parameters1. Power supply: AC 220 V10%50Hz;2. Outer crucible:(1) Material: Carbon structural steel;(2) Diameter of upper opening: 1005 mm;(3) Height: 505 mm;(4) Diameter of bottom: 562 mm;3. Inner crucible:(1) Material: Carbon structural steel;(2) Diameter of upper opening: 641 mm;(3) Height: 471 mm;(4) Diameter of bottom: 381 mm;(5) Scale line: there is a line 12 mm away from the rim of upper opening and a line 18 mm away from the rim of upper opening.4. Gas tube: the diameter of nozzle is0.81 mm. The inner surface of tube is smooth and it can adjust flame to 3 to 4 mm.5. Heater: Heated by an electric furnace. Heating power is 1000 W and adjustable.6. Thermometer: 0360 ; each scale division is 1 . It conforms to GB/T514.7. Ambient temperature: 35 ;8. Relative humidity: 85;9. Total power consumption: not more than 1100 W;