-
Min. Order (MOQ)
1 Piece(s)
Technical specifications product sitop smart power supply, type 24 v5 a input input 1-phase ac supply voltage 1 at ac nominal value 120 v supply voltage 2 at ac nominal value 230 v voltage range noteset by means of selector switch on the device input voltage 1 at ac 85132 v input voltage 2 at ac 170264 v wide-range input no overvoltage resistance 2.3 vin rated, 1.3 ms mains buffering at iout rated, min. 20 ms mains buffering at vin = 93187 v rated line frequency 5060 hz rated line range 47.63 hz input current at nominal level of the input voltage 120 v 2.1 a input current at nominal level of the input voltage 230 v 1.15 a switch-on current limiting (+25 c), max. 32 a duration of current limiting at 25 c typical 3 ms inrush current as 0.8 as built-in incoming fuse t 3, 15 a250 v (not accessible) protection in the mains power input (iec 898) recommended miniature circuit breaker: from 6 a, characteristic c output output controlled, isolated dc voltage rated voltage 24 v total tolerance, static 3 % static mains compensation, approx. 0.1 % static load balancing, approx. 0.5 % residual ripple peak-peak, max. 150 mv residual ripple peak-peak, typ. 50 mv spikes peak-peak, max. (bandwidth: 20 mhz) 240 mv spikes peak-peak, typ. (bandwidth: 20 mhz) 150 mv adjustment range 22.828 v product feature output voltage adjustable yes output voltage setting via potentiometer status display green led for 24 v ok onoff behavior overshoot of vout approx. 4 % startup delay, max. 0.1 s voltage rise, typ. 50 ms rated current value iout rated 5 a current range 06 a note6 a up to +45 c delivered active power typ. 144 w short-term overload current at short-circuit during run-up typical 17 a duration of overloading ability for excess current on short-circuiting during the start-up 100 ms short-term overload current at short-circuit during operation typical 17 a duration of overloading ability for excess current on short-circuiting during the operational phase 200 ms parallel switching for enhanced performance yes numbers of parallel switchable units for enhanced performance 2 efficiency efficiency at vout rated, iout rated, approx. 87 % power loss at vout rated, iout rated, approx. 17 w closed-loop control dynamic mains compensation (vin rated 15 %), max. 0.3 % dynamic load smoothing (iout: 5010050 %), uout typ. 1 % load step setting time 50 to 100%, typ. 0.2 ms load step setting time 100 to 50%, typ. 0.2 ms protection and monitoring output overvoltage protection < 33 v current limitation 6.46.6 a characteristic feature of the output short-circuit protected yes short-circuit protection constant current characteristic enduring short circuit current effective level typical 10 a overloadshort-circuit indicator - safety primarysecondary isolation yes potential separation safety extra low output voltage vout according to en 60950-1 and en 50178 protection class class I stray current maximum 3.5 ma stray current typical 0.4 ma ce mark yes ulcsa approval yes ulcul (csa) approval culus-listed (ul 508, csa c22.2 no. 107.1), file e197259, ccsaus (csa c22.2 no. 60950-1, ul 60950-1, ul 1604) explosion protection atex (ex) ii 3g ex na ii t4; ul 1604 class i, div. 2, group abcd fm approval - cb approval yes marine approval gl degree of protection (en 60529) ip20 emc emitted interference en 55022 class b supply harmonics limitation en 61000-3-2 noise immunity en 61000-6-2 operating data ambient temperature in operation 060 c notewith natural convection ambient temparature on transport -40+85 c ambient temparature in storage -40+85 c humidity class according to en 60721 climate class 3k3, no condensation mechanics connection technology screw-type terminals connections supply input l, n, pe: 1 screw terminal each for 0.5 . 2.5 mm single-corefinely stranded connections output l+, m: 2 screw terminals each for 0.5 . 2.5 mm connections auxiliary - width of the housing 50 mm height of the housing 125 mm depth of the housing 125 mm installation width 50 mm mounting height 225 mm weight, approx. 0.5 kg product feature of the housing housing for side-by-side mounting yes type of mounting wall mounting no type of fixing cap rail mounting yes type of mounting s7-300 rail mounting no installation snaps onto din rail en 60715 35x7.515 other information specifications at rated input voltage and ambient temperature +25 c (unless otherwise specified)
Additional Information:
Payment Terms :
T/T, Western Union
Packaging Details : 100% Siemens Original and New.
Standard Air Conditioning Packing
Delivery Time : In Stock
China, China
Write a Review
Mohammad Niqab Khan (East Advance Technology Co. Ltd.)
Share us via
