hangzhou, China
Write a Review
Our Products
We offer the best product range of Ultrasonic Flow Meter, Split Type Electromagnetic Flow Meter, Electromagnetic Flowmeters, Pressure Transmitter and Vortex Flowmeters.
A62200
ACENSF/ANSI 61IP685 s/cm0.215 m/s
Additional Information:
Payment Terms : L/C
Delivery Time : 7 days
AEA 16 AEA 16 700bar
Additional Information:
Payment Terms : L/C
Delivery Time : 7 days
Clamp-on ultrasonic flowmeter is composed of two parts: host and clamp-on sensor. Its unique installation method, just gently paste the sensor on the surface of the pipeline, you can realize the flow measurement of various liquids. There is no need to disconnect the pipe and disconnect the flow of the operation, truly non-destructive installation.
Additional Information:
Payment Terms : L/C
Delivery Time : 7 days
Vortex flowmeter for saturated steam is based on Karman (Karman) vortex principle of research and production of measuring gas, steam or liquid volume flow rate, standard volume flow rate or mass flow rate of the volume flow meter. Mainly used for industrial pipeline media fluid flow measurement, such as gas, liquid, steam and other media, but also can measure the turbid liquid containing small particles, impurities, widely used in petroleum, chemical, pharmaceutical, papermaking, metallurgy, electric power, environmental protection, food and other industries.
Additional Information:
Payment Terms : L/C
Delivery Time : 7 days
One of the main advantages of sanitary electromagnetic flowmeters is that they can accurately measure regardless of the type of medium being measured, as well as its temperature, viscosity, and density, making them ideal for food processing applications.
The design of sanitary electromagnetic flowmeters meets food grade standards, and the suppliers of linings are the same as E+H and Krohne. The smooth, seamless design makes cleaning easier and less likely to breed bacteria, which better ensures a hygienic food environment.
The plastic parts of sanitary electromagnetic flowmeters are all FDA certified. Food hygiene requires a minimum metal material of stainless steel 304. We use stainless steel 316L with better hygiene requirements. It is a perfect choice for food and beverage processing plants.
Additional Information:
Payment Terms : L/C
Delivery Time : 7 days
Insertion electromagnetic flowmeters are typically used in large pipes where it is not feasible to install a full-bore flow meter, and they are commonly used in industries such as water treatment, wastewater treatment, and chemical processing.
There are many types of electromagnetic flowmeters, including integral, remote, clamping and insertion types, to meet different needs and installation methods.
Features of Insertion Electromagnetic Flowmeter
Plug-in electromagnetic flowmeter is easy to install, does not need to be cut off, can perform hot tapping on site, and has absolute advantages in installation in large pipeline flow detection.
The flow measurement is only related to the insertion depth, so the flowmeter has wide versatility and strong interchangeability.
The manufacturing cost and installation cost are lower than those of general electromagnetic flowmeters, and it is particularly suitable for flow measurement in large and medium-diameter pipelines.
The online pluggable installation type product can be easily installed and disassembled without stopping water under low pressure or pressure.
The converter has good interchangeability, and the accuracy can be achieved without re-calibrating the real flow.
It adopts advanced low-frequency square wave excitation, with stable zero point, strong anti-interference ability and reliable operation.
Small signal excision function. The user can set the lower limit voltage and lower limit flow through the display panel, to cut off the interfering small signal flow.
In addition to the advantages of general pipeline electromagnetic flowmeters, insertion-type electromagnetic flowmeters also have their own advantages, such as small size, light weight, easy installation and use, and low production and installation costs. Therefore, if the pipe diameter is large, the insertion connection is the best choice
Additional Information:
Payment Terms : L/C
Delivery Time : 7 days
Split electromagnetic flow meter consists of two parts: the sensor and the converter, the sensor is installed in the measuring pipe, the converter is installed within 30 meters or 100 meters from the sensor, the two are connected by shielded cable.
Split type magnetic flow meter is applicable for all conductive liquids, such as: Domestic water, industrial water, raw water, ground water, urban sewage, industrial wastewater, the processed neutral pulp, pulp slurry, etc.
Selection Between Integrated Electromagnetic Flowmeter and Split Type Electromagnetic Flow Meter
Integrated type electromagnetic flowmeter: Generally chosen for conditions with favorable site and environment, where the sensor and converter are assembled into one unit.
Split electromagnetic flowmeter: The sensor and converter are installed in different locations, typically selected in the following situations:
Based on the temperature of the measured medium, an integrated electromagnetic flowmeter can withstand temperatures up to 80C, while a split-type electromagnetic flowmeter can withstand temperatures up to 150C. Choose the appropriate flowmeter according to the medium temperature.
Consider whether there are explosion-proof requirements; split-type electromagnetic flowmeters are typically used in harsher working environments, so they have a higher protection rating, usually IP68.
In conditions with significant pipeline vibrations.
In environments where the aluminum housing of the sensor would be severely corroded.
In areas with high humidity or corrosive gases.
When the flow meter is installed at high altitudes or underground where it is inconvenient to debug.
When ordering, the separation distance between the sensor and the converter should be specified, generally not exceeding 100m. The converter is wall-mounted.
Additional Information:
Delivery Time : 7 days
JIAPING Fan (hangzhou ARTang INTELLIGENT EQUIPME)Guotai Science and Technology Building, Minhe Road, Xiaoshan District, hangzhou - 310000, China
Share us via
