Electrodes

Our offered Product range includes AWSE6013 Welding Electrode and Welding Electrode.

Awse6013 Welding Electrode

We are offering awse6013 welding electrode.Features:aws e6013 is carbon steel welding electrode covered with a high titania potassium type coating. Both ac and dc can be applied, and it is applicable for all-position welding, including vertical-down welding. It shows a very good welding performance with small spatter, easy restrike arc and very good weld shape. Application:suitable for welding low carbon steel structures and low carbon galvanized plate, especially applicable for vertical-down welding and intermittent welding. Attention:a.generally, welding electrode donot need bake before welding.B.if damped, the electrodes should be baked for 0.5-1 hour at the temperature of 150-170 before welding. Chemical composition of deposited metal: (%)c mn si s pstandard 0.10 0.32-0.55 0.30 0.035 0.040typical 0.08 0.45 0.2 0.019 0.020 mechanical properties of deposited metal: tensile strength (mpa) yield point (mpa) elongation(%) akv impact (-20)420 330 17 47490 425 24 76 recommended current(acdc):diameter(mm) 2.0 2.5 3.2 4.0 5.0 5.8current(a) 50-80 60-100 100-140 150-210 180-240 220-280

View Complete Details

Ask Latest Price & Details

Welding Electrode

Material steel alloy
Diameter 2.0 2.5 3.2 4.0 5.0 mm
Application welding low ccarbon steel
iength 3oo 350 400 450 mm
operating 80-130A 140-170A 180-240A
welding current 80-130A 140-170A 180-240A
port tianjin
supply ability 300 tons per week

We offer welding electrode. Aws e7018 is a iron powder low hydrogen type carbon steel welding electrode. It can be used for all position welding with excellent performances: small spatters, easy restrike arc, high welding efficiency, fine appearance and slag easy to remove, etc. The seam weld metal shows a satisfactory plasticity, excellent low temperature toughness and high crack resistance. Both ac and dc can be applied.Application:suitable for welding important medium carbon steel and low alloy steel, such as 16mn steel, parts of ships fabricated by a, b, d, e grade steel as well as parts of boilers, pressure vessels and pipes.Attention:a.welding electrode should be baked at the temperature of 350 for one hour before welding, and then use them after baking.B. Before welding, the weld metal must be cleared away impurities, such as rust, oil, moisture, etc.C.short arc and narrow weld bead are recommended in welding. Chemical composition of deposited metal: (%)c mn si s p cr ni mo vstandard 0.15 1.60 0.75 0.035 0.040 0.20 0.30 0.30 0.08typical 0.065 1.38 0.44 0.012 0.020 0.011 0.015 0.001 0.002 mechanical properties of deposited metal:yield point (mpa) tensile strength (mpa) elongation (%) akv impact(-30)(j)400 490 22 27460 550 31 130 diameter and recommended current (ac70v or dc70v)diameter(mm) 2.5 3.2 4.0 5.0length(mm) 300 350 400 400current(a) 70-110 100-140 140-180 190-240

View Complete Details

Ask Latest Price & Details