HiSuccess International Machinery Limited

Shanghai, China

• MOQ 1 Set(s)
• CertificationCCC CE GOST ASME

The single screw plastic pipe extrusion line (him-pp-65) integrates a number of new innovations and refined designs and optimization. This line is specially designed for manufacturing plastic pipes used for conveying water and gas. The high performance of this production line ensures not only higher throughput but high quality products. At the same time, the cost efficiency and our devoted services will surely convince you to make the right choice.

• CertificationCCC CE ASME GOST

We are offering xps insulation board production line brief introduction what is xps? xps (extruded polystyrene) insulation board, is a new insulation material, which is a high quality foam product characterized by smooth skin with a closed-cell structure that looks like a mass of uniform bubbles with common walls between them. There are few, if any, voids between the cells, top and bottom skin. features of xps comparing with other traditional insulation materials, such as eps, pu and rock wool, xps is improved in terms of insulation, moisture-proof, compressive strength, durability, convenient installation and low cost. As an ideal material, xps is widely applied in heat preservation and insulation systems, moisture-proof and obstruct systems, with promising potential market. Main configuration feeding system first extruder hydraulic mesh exchanger second extruder mould calibrator first haul-off unit longitudinal cutter cross cutter second haul-off unit controlling system packing system main parameters item him-x-250 him-x-500 him-x-750 extruder system 1st extruder 2nd extruder 1st extruder 2nd extruder 1st extruder 2nd extruder screw dia mm 135 150 75x2 150 75x2 200 ld ratio ld 30:1 33:1 30:1 33:1 30:1 33:1 driving motor power kw 75 55 75 75 90 90 capacity kgh 250~300 350~450 450~550 product width mm 600 600 600 product thickness mm 20~100 20~100 20~100 density kgm3 30~39 30~39 30~39 total power kw 260 280 350 the advantages of xps production line 1. The xps insulation board production lines from hisuccess international (our lines) are much cheaper than the lines with same capacities from europe, only 10% to 20%. The products from both the lines are similar. 2. Our lines can use 100% recycle materials, such as recycled eps and gpps as well as virgin gpps as raw materials. It can reduce the cost of xps board very much.

• MOQ 1 Set(s)

We are offering wpc production line. □ what is wpc? extruded by thermoplastic and wood powder with various additives, wpc, as a best replacement for pure wood and a good option for solving the plastic pollution annoying the world environment, is summoning more and more attentions all over the world. □ characteristics as a mixture of plastic and wood powder, wpc is superior for: 1. Wood texture 2. Anti-acid 3. Antiseptic 4. Fireproof 5. Durable 6. Waterproof 7. Reclaimable 8. Etc □ main raw materials thermoplastics: pvc, pe, pp, ps, abs, etc wood powder additives: coupling agent stabilizer lubricate anti-aging additive foaming agent pigment anti-uv additive, etc □ formula in the wpc production process, one of the most significant elements is the additive formula, which dramatically influences on wpc characters. Hisuccess has a specialist team with various practical experience helping our clients out to produce various wpc products. □ how to choose the raw material pe, pp: outdoor decoration, such as outdoor floors, pillars trays sleeper supporting frame railing pvc: indoor decoration pvc indoor floor pvc window frame pvc door frame pvc door □ wpc products □ process of wpc (pe as an example)

• MOQ 1 piece
• Packaging TypeBlue and White

We are offering sponge production line. Main technical parameter and the requirement of configuration 1. Specification of all individual part 1.1 foaming control platform (l×w×h) 4m×3.2m×3.2m 1.2 board of baking channel (l×w) 7.7m×1.2m ~ 2.3m 1.3 transport line of side baking channel (l×w×h) 17.5m×2.4m×1.2m 1.4 shelf of oven (l×w×h) 16.9m ×4.55m×3.2m 1.5 horizontal transfer line in baking machine (l×w×h) 25.0m×2.4m×0.8m 1.6 cutter cutting width2.4m×1.4m (width) 1.7 one set of interconvertible mixer head 1.8 a set of pre-mixer for silicone oil 2.main technical index and function 2.1 dimension(l×w×h): 41m×4.55m×3.2m 2.2 number of component: 13components 2.3 foaming width : 1200mm ~ 2300mm 2.4 foaming height: 1300mm (max.) 2.5 foaming density : 8kgm³ ~ 55kgm³ 2.6 foaming speed : 2000mmmin ~ 7000mmmin 2.7 maximum foaming capacity: 300lmin 2.8 equip with edge membrane lifting machine(flat top function) 2.9 equipment of membrane automatic rolling 2.10 alarm device of starved feeding 2.11 type of spraying material: spray head under (up, down, front, back can be adjusted) and foaming in slot type(one set of w1500 and one set of w2000) 2.12 foaming controlling method ① it can be controlled with total automatic human-machine surface and plc. It cans product sponge with different formula continuously at a time. ② the process controlled by frequency converting control. And the production line is synchronization system. ③ the height and width of the falling plate can be adjusted by electric device. ④ the width of side chain board can be adjusted by electric device. 2、 cuttable foam(l×w×h): 1500mm×2300mm×1300mm; the length (1500mm) is the shortest. 3、 the power of mixing head: 37kw 4、 total power: 135kw

• MOQ 1 Set(s)
• CertificationCCC CE ASME GOST

We are offering conical twin-screw extruder sjsz-51 conical twin-screw extruder adopts advanced technology introduced from abroad and developed by our company. The machine has the quality of small shearing rate, materials are hard to decompose, well-distributed plasticization mixing, high output and quality, wide application. The machine has the devices of automatic temperature control, vacuum exhaust, screw core circulating oil cooling etc. Feeding mode adopts forced fixed quantity feeding. Main motor adopts ac motor inverter speed regulation. The machine is consist of eight equipments: machine body, speed reduced driven equipment, distribution box equipment, extruding system, fixed quantity feeding equipment, barrel air cooling equipment, vacuum exhaust equipment and electrical control equipment. Barrel: made of 38crmoal high quality alloy steel with cooling fins and processed by nitridation. Screw: made of 38crmoal high quality alloy steel with oil cooling outside circulation and processed by nitridation. Screw diameter: 51105mm screw effective length: 1120mm screw quantities: 2 screw mesh mode: cone-shape mesh screw rotation speed: 1~34.4 rpmmin screw rotation direction: anti-clockwise outward barrel heating sections: 4 barrel heating power: 12kw barrel cooling mode: air cooling barrel exhaust mode: 1.5kw water-ring vacuum pump feeding mode: 1.1kw inverter motor fixed quantity feeding transmission main motor power: 15kw ac motor extruding capacity: 100kgh central height: 1000mm controlling system: developed by our company, the 10 temperature control meter adopt omron, inverter fuji, contactor siemens. Main engine and auxiliary engine are under synchronous control, they can also be operated separately.

• MOQ 1 Set(s)
• Packaging TypeBlue and White

Xps insulation board production line brief introduction what is xps? xps (extruded polystyrene) insulation board, is a new insulation material, which is a high quality foam product characterized by smooth skin with a closed-cell structure that looks like a mass of uniform bubbles with common walls between them. There are few, if any, voids between the cells, top and bottom skin. features of xps comparing with other traditional insulation materials, such as eps, pu and rock wool, xps is improved in terms of insulation, moisture-proof, compressive strength, durability, convenient installation and low cost. As an ideal material, xps is widely applied in heat preservation and insulation systems, moisture-proof and obstruct systems, with promising potential market. Main configuration feeding system first extruder hydraulic mesh exchanger second extruder mould calibrator first haul-off unit longitudinal cutter cross cutter second haul-off unit controlling system packing system main parameters item him-x-250 extruder system 1st extruder 2nd extruder screw dia mm 135 150 ld ratio ld 30:1 33:1 driving motor power kw 75 55 capacity kgh 250~300 product width mm 600 product thickness mm 20~100 density kgm3 30~39 total power kw 260 the advantages of xps production line 1. The xps insulation board production lines from hisuccess international (our lines) are much cheaper than the lines with same capacities from europe, only 10% to 20%. The products from both the lines are similar. 2. Our lines can use 100% recycle materials, such as recycled eps and gpps as well as virgin gpps as raw materials. It can reduce the cost of xps board very much. The lines from europe only can use virgin materials. The prices of recycled materials are much cheaper than virgin materials. Our lines are the environment friendly machinery.

• MOQ 1 Set(s)

Xps insulation board production line brief introduction what is xps? xps (extruded polystyrene) insulation board, is a new insulation material, which is a high quality foam product characterized by smooth skin with a closed-cell structure that looks like a mass of uniform bubbles with common walls between them. There are few, if any, voids between the cells, top and bottom skin. features of xps comparing with other traditional insulation materials, such as eps, pu and rock wool, xps is improved in terms of insulation, moisture-proof, compressive strength, durability, convenient installation and low cost. As an ideal material, xps is widely applied in heat preservation and insulation systems, moisture-proof and obstruct systems, with promising potential market. Main configuration feeding system first extruder hydraulic mesh exchanger second extruder mould calibrator first haul-off unit longitudinal cutter cross cutter second haul-off unit controlling system packing system main parameters item him-x-500 extruder system 1st extruder 2nd extruder screw dia mm 75*2 150 ld ratio ld 30:1 33:1 driving motor power kw 75 75 capacity kgh 350~450 product width mm 600 product thickness mm 20~100 density kgm3 30~39 total power kw 260 the advantages of xps production line 1. The xps insulation board production lines from hisuccess international (our lines) are much cheaper than the lines with same capacities from europe, only 10% to 20%. The products from both the lines are similar.

• MOQ 1 Set(s)
• CertificationCCC ASME CE GOST

We are offering rebonding foaming machine. brief introduction this production line is used to produce recycled sponge. The crusher mills the scrap sponge into small granulates and then delivers to the storage room. Then, the crushed sponge will be delivered to mixer by sponge blower. The machines mix the crushed sponge and glue which then undergoes the sponge forming moulds in which the treated materials are then pressed into recycled sponge according to required density. It is an automatic assembly line consisting of blending, mixing, forming parts and with high

• MOQ 1 Set
• CertificationCCC ASME CE GOST

We are offering foam production line. Main technical parameter and the requirement of configuration 1. Specification of all individual part 1.1 foaming control platform (l×w×h) 4m×3.2m×3.2m 1.2 board of baking channel (l×w) 7.7m×1.2m ~ 2.3m 1.3 transport line of side baking channel (l×w×h) 17.5m×2.4m×1.2m 1.4 shelf of oven (l×w×h) 16.9m ×4.55m×3.2m 1.5 horizontal transfer line in baking machine (l×w×h) 25.0m×2.4m×0.8m 1.6 cutter cutting width2.4m×1.4m (width) 1.7 one set of interconvertible mixer head 1.8 a set of pre-mixer for silicone oil 2.main technical index and function 2.1 dimension(l×w×h): 41m×4.55m×3.2m 2.2 number of component: 13components 2.3 foaming width : 1200mm ~ 2300mm 2.4 foaming height: 1300mm (max.) 2.5 foaming density : 8kgm³ ~ 55kgm³ 2.6 foaming speed : 2000mmmin ~ 7000mmmin 2.7 maximum foaming capacity: 300lmin 2.8 equip with edge membrane lifting machine(flat top function) 2.9 equipment of membrane automatic rolling 2.10 alarm device of starved feeding 2.11 type of spraying material: spray head under (up, down, front, back can be adjusted) and foaming in slot type(one set of w1500 and one set of w2000) 2.12 foaming controlling method ① it can be controlled with total automatic human-machine surface and plc. It cans product sponge with different formula continuously at a time. ② the process controlled by frequency converting control. And the production line is synchronization system. ③ the height and width of the falling plate can be adjusted by electric device. ④ the width of side chain board can be adjusted by electric device. 2、 cuttable foam(l×w×h): 1500mm×2300mm×1300mm; the length (1500mm) is the shortest. 3、 the power of mixing head: 37kw 4、 total power: 135kw