Jinglong Technology Co. Ltd

Mailitary Battery Charger Ch0004 part No: Ch0004 nsn :6130-01-559-0124 dc Input Range: 12 to 36 Vdc, Mil-std 1275 ac Input Range: 115-230 Vac, 50 to 60 Hz charge Rate: 1.0 Amp per String(bb-390 / 590 Batteries ) 1.1 Amps per String(bb-2590 / Ubi-2590 Batteries) led Indicators:battery Type, Charging, Discharge, 90% Charged size: 14 L X 12 W X 6 D (35.56 X 30.48 X 15.24 Cm) weight: 12 Lbs. (5.44 Kg) Without Batteries storage Altitude :27, 000 Ft (8, 229.6 M) operating Altitude :55, 000 Ft (16, 764 M) humidity :95% Relative accessories :included Ac and Dc Cables allows Operation from Nearly Any Ac or Dc Power source Likely to Be Encountered Worldwide. any Combination of the Following Batteries Can Be Recharged: bb-390/u -nickel Cadmium (nicd) bb-2590 / Ubi-2590 (ubbl02) / Mrc-2590 / Ubbl09 / Ubi-2590 smbus (ubbl10)-lithium-ion (li-ion) unattended Charging - Smart Charge Modules that Detect Open or Shorted cells.if a Defective Cell is Detected, The Ch0004 Will Not start Charge Cycle - No Programming or Special Instruction Set to Achieve safe and Complete Recharge of Battery - in No Event Will a Battery Be Overcharged Using the smart Charging Techniques of the Ch0004 conditioning Cycle - Automatic Discharge/recharge Function Included. the conditioning Cycle Can Be Activated Individually per Battery at Operator's Option recharges Each String of Cells - to Assure a Positive Recharge of the Battery Each individual String of Cells in the Battery is Recharged independently ce Mark Approval - the Ch0004 Has Approval for Ce Mark.

Military Battery Charger BC2791 Charge Voltage: 16.8Vol (Lithium-Ion)FEATURES: The BB-2791 is based on "smart charging" technology. The unit automatically detects battery problems such as open cells or other battery problems, which prevent a safe and efficient charge. There are a number of internal safeguards, Built into the unit. Temperature, voltage and time are monitored throughout the fast charge. Fast charge is terminated when the unit detects the battery has been fully charged. The charger will charge using a constant current of 2.5A until the voltage reaches 16.8V. When the voltage is reached, the charger will go into a constant voltage mode. When the charge current falls below 240mA, the charge is complete. There is a 12 hour safety timer if the charge current never goes low enough. This will terminate the charge.Input Power CapabilitiesDC Input Range: 12 to 36 V DC Auto ranging, AC Input Range: 95 to 260 V AC, 47 to 440 Hz auto range Charge Current: 2.5 Amp per StringPrimary Competitive Advantages1. Well and High Quality Control 2. Prompt Delivery3. Customer's Designs and Logos are Welcome4. Competitive Prices5. Earth-friendly Products 6. Small Order Acceptable 7. ODM Accepted 8. OEM Accepted