Jinmuyu Electronics Co. Ltd.

Mr800 series for reader/writer with the popular arm7 microprocessors are of rapid & stable, reliable operation and beautiful appearance. User can choose freely if with the lcd display modul(128x64). They support boot screen & idle screen set and picture storage etc. The interface is usb pc/sc. They can be directly used the windows operating system with driver and the api functions. The development cycle simple and short. The reader not only supports series ic cards according to iso14443 typea/b, iso15693 but also sam cards compliant with iso7816 (t=0 and t=1).

Mr780 series, based on nxp pcd or compatible pcd, is popular and high performance desktop reader. The reader supports series ic cards according to iso14443, iso15693; various contactless ic card under international standard; especially the contactless cpu cards under iso14443-4. Meanwhile the reader is available to pass emv2000 and pboc 2.0 and be authenticated by many laboratorial certifications---visa wave & pay pass (by fime) and the bank card test center. There are 3 sam card slots in the reader(t=0 and t=1). The reader supports card-reset of various communication rate; ppss operation after card-reset.

Mr701 series, based on nxp pcd or compatible pcd, is popular and high performance desktop reader. The reader supports series ic cards according to iso14443, iso15693; various contactless ic card under international standard; especially the contactless cpu cards under iso14443-4. Meanwhile the reader is available to pass emv2000 and pboc 2.0 and be authenticated by many laboratories--visa wave & pay pass (by fime) and the bank card test center. There are 2 sam card slots in the reader. The one card solution system was optimized. So it can support fully sam cards under 9600bps & 38400bps.

Mr761 series, based on nxp pcd, is the desktop reader. The reader supports series ic cards according to iso14443a, iso14443b and outputs the data by the way of simulation keyboard through usb interface. Mr761 ic card is desktop reader with usb interface (hid standard). In the systems of windows, linux and other pc systems support usb keyboard, the reader imitates the usb keyboard to operate the card data. With our software and dip switch, the users can set the reader if to read the number of the card or the data of the card or both. And the data can be positive sequence output or be reverse order output. Meanwhile the users can choose freely the key output such as enter, tab etc. After the output of the number and the data of the card. the default of the mr761 is configuration mode in factory setting. If you want to let the reader work, you need deploy it through the software and input the configuration information to the reader. The reader embeds 2 sam card slots. If the users need read the sam card and use the sam to cooperate with the operation, and then you can contact us, we will help you do the job.