JINZHOUYICHENGCELLULOSECO.LTD.

Shijiazhuang, China

Ceramictile cement composition of cement, quartz sand and enrichmenttackifier, the adhesive comparedwith existing technology, a wide range of construction, strong adhesion, easy construction, ceramic tile, ground and wall not soaked with water, hardening timelong before construction, construction personnel have adequateadjustment characteristics such as time, therefore, has great value in use. General Tile Adhesive Type HPMC: Normal Tile Adhesive applies to the floor tiles of ordinary mortar surface or the small pieces of wall tiles. With high viscosity is suggested in tile adhesives with the dosage is about 0.2 to 0.3% in dry mortar. Recommended grades: L150000 Standard Tile Adhesive: Standard Tile Adhesive has the properties of better adhesion strength and slip resistance, which applies to the wall tiles with strong adhesion or wooden surface. The suggested dosage of HPMC is generally about 0.3 to 0.4% in dry mortar up to this level. Recommended grades: H150000 High Performance Tile Adhesive: High Performance Tile Adhesive has the property of adhesion strength, which applies to paste tiles in gypsum board, fiber board and the various stone materials, etc. The suggested dosage of Yicheng is generally 0.4 to 0.6% in tile adhesives to reach the highest level. Recommended grades: H150000 Data Sheet:Quickly find what you need *This video is English version.

Hpmc is a new chemical fiber used in construction, it has good water retention, adhesion, anti-skidness, and is often used in cement mortar putty powder additive. Oil exploration and so on.hpmc is widely recognized and used in the world. Applications: hpmc can be used as thickeners, dispersing agent, emulsifiers and film-forming agent.its industrial products can be used in chemicals, synthetic resins, construction and coatings. construction mortar, plaster mortar, putty water-resistant putty, interface agent, exterior wall adhesive putty, ceramic tile adhesive, flashing compound, self-levering material, thickening agent. Technical parameters: items model methoxy (%) hydroxypropyl (%) viscosity range (cps) moisture content (%) ash content (%) degree of fineness (%) water-insoluble low viscosity sl-6000 26.5-31 4-7.5 5000-10000 6 2.0 99 0.5 sl-30000 26.5-31 4-7.5 25000-35000 6 2.0 99 0.5 mediumviscosity sl-40000 26.5-31 4-12 35000-45000 6 2.0 99 0.5 sl-60000 26.5-31 4-12 55000-65000 6 2.0 99 0.5 sl-75000 26.5-31 4-12 65000-80000 6 2.0 99 0.5 high viscosity sl-100000 26.5-31 7-12 85000-105000 6 2.0 99 0.5 sl-150000 26.5-31 7-12 120000-155000 6 2.0 99 0.5 sl-200000 26.5-31 7-12 170000-200000 6 2.0 99 0.5 .

Widelyusedasabinderinthemanufactureofceramicproducts.hasthe following characteristics of caulking repair agent cellulose cracking andcaulking agent: 1, construction 2, anti hanging 3, good water retention construction: 1, conventional sealant sealant in cement brick two days before construction (paving tile glue two days of construction) construction temperature not lower than 0 degrees; 2, you mustfirst make the mosaic surface or the stone surface and seam is clean, good withwet cloth on the surface of the wet, but don't leave water, in order to reducethe holes on the mosaic suction paint and cement, and ensure the coloring and final condensationdegree; 3, in order to help control and reduce the color powder, use cotton cloth or clean in 1-2 hours dry towel to wipe the surface. product description china manufacturer hydroxypropyl methyl cellulose hpmc hpmcisodorless, tasteless, non-toxiccelluloseethersproducefromnaturalhighmolecular cellulosethroughseriesofchemicalprocessing.

The interior wall putty cellulose ether has the following characteristics in putty: 1, easyto mix, no caking 2, improve construction performance 3, increase water demand 4, improve water retention 5, increase temperature stability 6, improve bondingstrength. Asawater-retainingagentofcementmortar, retardermakesthemortarpumpability.Intheplaster, plaster, puttypowderorotherbuildingmaterialsasabinder, toimprovethesmearandextendtheoperationaltime.Usedtopastetiles, marble, plasticdecoration, pasteenhancer, butalsocanreducetheamountofcement.HPMC'swaterretentionpropertiesmaketheslurrywillnotbetoofastandcrackedaftercoating, enhancethestrengthafterhardening.

Tile adhesive is also named ceramic tile adhesive, which is mainlyused for decorative materials andother construction decorations. HPMC is used to improve the keyproperties like water retention, slip resistance, and workability, etc. Description HPMC For Tile Adhesive, Ceramic Tile Adhesive, Tile Adhesive Mortar, GoodWater Retention, Slip Resistance, BetterWorkability. Normal Tile Adhesive Normal Tile Adhesive applies to the floor tiles of ordinary mortar surface or the small pieces of wall tiles. Yicheng HPMC with high viscosity is suggested in tile adhesives with the dosage is about 0.2 to 0.3% in dry mortar. Recommended grades: L150000 Standard Tile Adhesive: Standard Tile Adhesive has the properties of better adhesion strength and slip resistance, which applies to the wall tiles with strong adhesion or wooden surface. The suggested dosage of Yicheng HPMC is generally about 0.3 to 0.4% in dry mortar up to this level. Recommended grades: M150000 High Performance Tile Adhesive : High Performance Tile Adhesive has the property of adhesion strength, which applies to paste tiles in gypsum board, fiber board and the various stone materials, etc. The suggested dosage of Yicheng HPMC is generally 0.4 to 0.6% in tile adhesives to reach the highest level. Recommended grades:S150000 Yichneg HPMC Technical Information:Features ofproducts: water retention goodworkability Overallgood performance Very good open time