- MOQ 1 Piece
- Size450×450×500
Model Studio Size (D*W*H)mm Dimension(D*W*H)mm LRHS-101B-L 450×450×500 1160×1000×1610 LRHS-225B-L 500×600×750 1210×1150×1870 LRHS-504B-L 700×800×900 1260×1340×2070 LRHS-800B-L 800×1000×1000 1370×1550×2170 LRHS-1000B-L 1000×1000×1000 1560×1550×2170 temperature range A:-20℃~150℃ B:-40℃~150℃ C:-60℃~150℃ D:-70℃~150℃ Temperature uniformity ≤2℃(at no load) Temperature fluctuation ±0.5℃(at no load) heating rate 1.0~3.0℃/min cooling rate 0.7~1.0℃/min Time Setting Range 1~9999H test hole Mounted on the left side of the machine for use with external test power or signal cables viewing window 210 x 275mm or 395 x 395mm (effective field of view) Outer case material High quality A3 steel plate electrostatic spraying Inner box material Imported high-grade stainless steel SUS304 Insulation material Rigid polyurethane foam + fiberglass Temperature Controller Korea Sangwon ST590 Meter temperature sensor PT100 platinum resistance temperature measurement body Cooling method Single or double cascade refrigeration Compressor Taikang, France standard configuration Sample racks, 2 tiers, with condensate catch pan and drain out of the box security protection Compressor overpressure overload, fan motor overheating, the overall equipment under phase / reverse phase Over-temperature, overall equipment timing, leakage protection, overload and short-circuit protection Supply Voltage AC380V±10% 50Hz Power (A)3.5kW/4.0kW/6.0kW/8.0kW/9.0kW (B)4.0kW/4.5kW/7.5kW/9.0kW/10.5kW (C)4.5kW/6.5kW/9.0kW/13.0kW/13.0kW operating environment 5℃~+28℃ ≤85% RH Note: 1、the above data are in the use of ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard high and low temperature test chamber etc 3、This technical information, subject to change without notice