shanghai, China
Write a Review
Our Products
Our product range contains a wide range of Salt Spray Test Chamber, Humidifier Chamber, Thermal Shock Test Chamber, Temperature Humidity Test Chamber and High and Low Temperature Test Chamber
| Model | Studio SizeD*W*Hmm | DimensionD*W*Hmm | |
| LRHS-108-RJY | 450600400 | 78011401050 | |
| LRHS-270-RJY | 600900500 | 96014601150 | |
| LRHS-412-RJY | 7501100500 | 110017301240 | |
| LRHS-663-RJY | 8501300600 | 123021501410 | |
| LRHS-816-RJY | 8501600600 | 123024501460 | |
| LRHS-1080-RJY | 9002000600 | 128028501460 | |
| Temperature range | RT+555 | ||||||
| Saturated drum temperature | RT+1070 | ||||||
| Temperature uniformity | 2 | ||||||
| Temperature fluctuation | 0.5 | ||||||
| Salt spray deposition | 12ml/80 cm.h16 Hourly average | ||||||
| Compressed air pressure | 2.000.01kg/cm | ||||||
| Spraying method | Continuous/Periodic Optional | ||||||
| Test time | 19999 HMStunable | ||||||
| Cycle time | 199 HMStunable | ||||||
| Specimen holder angle | 205 | ||||||
| Test Methods | NSS test, AASS test, CASS test | ||||||
| Case Material | Corrosion-resistant, high-strength, anti-aging, high-temperature resistant PP reinforced rigid plastic sheet | ||||||
| Lid Material | Corrosion-resistant, high-strength, anti-aging, high-temperature resistant PP reinforced rigid plastic sheet | ||||||
| Air-saturated drum | Imported high grade stainless steel SUS304 | ||||||
| Pressurized Air Hose Material | High quality rubber hose | ||||||
| Other pipelines | Thickened Fluorosilicone Rubber Tube | ||||||
| Temperature Controller | Adopting Japan UMC brand temperature meter | ||||||
| Temperature Sensor | PT100 Platinum resistance thermometer | ||||||
| Heater | Titanium Heating Tube | ||||||
| Interrupter | Schneider miniature circuit breakers (to prevent short circuits in control circuits) | ||||||
| Standard Configuration | V-shaped sample holders, round rods, nozzles, funnels, metering cylinders, mist evacuation tubes | ||||||
| Safety | Overall equipment under-phase/reverse-phase, equipment timing, rapid fogging instructions, over-temperature, end of test, low water level protection, leakage, short-circuit | ||||||
| Supply Voltage | AC220V10% 50HZ AC380V10% 50Hz | ||||||
| Power | 1.6kW/2.5kW/3.0kW/5.6kW/6.5kW/6.7kW | ||||||
| Operating environment | 528 85% RH | ||||||
| Note:1 the above data are in the use of ambient temperature of 25 and well ventilated conditions measured2Can be customized according to the users specific test requirements of the user non-standard Intelligent salt spray test chamber etc.3This technical information, subject to change without notice | |||||||
| Model | Studio SizeD*W*Hmm | DimensionD*W*Hmm | |
| LRHS-101-LH | 450450500 | 116010001610 | |
| LRHS-225-LH | 500600750 | 121011501870 | |
| LRHS-504-LH | 700800900 | 126013402070 | |
| LRHS-800-LH | 80010001000 | 137015502170 | |
| LRHS-1000-LH | 100010001000 | 156015502170 | |
| Temperature range | 0150 | ||||||
| Temperature uniformity | 2unladen | ||||||
| Temperature fluctuation | 0.5unladen | ||||||
| Humidity range | 20%98% RH | ||||||
| Humidity uniformity | +2% -3% RH | ||||||
| Humidity fluctuation | 2% | ||||||
| Heating rate | 1.03.0/min | ||||||
| Cooling rate | 0.71.0/min | ||||||
| Time Setting Range | 160000M | ||||||
| Test hole | Mounted on the left side of the machine for use with external test power or signal cables | ||||||
| Viewing window | 210275mm / 395395mmeffective vision | ||||||
| Outer case material | High quality A3 steel plate electrostatic spraying | ||||||
| Inner box material | Imported high-grade stainless steel SUS304 | ||||||
| Insulation material | Rigid polyurethane foam + glass fiber | ||||||
| Temperature Controller | Adopting Japan UMC brand temperature meter | ||||||
| Temperature Sensor | PT100 Platinum resistance thermometer | ||||||
| Cooling method | Stand-alone cooling | ||||||
| Compressor | Tecumseh, France | ||||||
| Standard configuration | 1 roll of wet bulb gauze, 2 sample racks, with condensate catch pan and drain out of the box | ||||||
| Safety | Compressor overpressure overload, fan motor overheating, the whole machine phase / reverse phase, over-temperature, the whole equipment timing, leakage protection, overload and short circuit protection. | ||||||
| Supply Voltage | AC380V10% 50Hz | ||||||
| Power | 4.0kW/5.5kW/8.5kW/11.5kW/11.5kW | ||||||
| Operating environment | 528 85% RH | ||||||
| Note:1the above data are in the use of ambient temperature of 25 and well-ventilated conditions measured2Can be customized according to the users specific test requirements of non-standard constant temperature and humidity test chamber etc.3This technical information, subject to change without notice | |||||||
| Model | Workshop size(D*W*H) mm | External Dimension(D*W*H)mm | |
| LRHS-101B-LV | 450×450×500 | 1700×930×1650 | |
| LRHS-150B-LV | 500×600×500 | 1800×1080×1650 | |
| LRHS-234B-LV | 600×600×650 | 1950×1080×1950 | |
| LRHS-512B-LV | 800×800×800 | 2950×1450×2250 | |
| LRHS-753B-LV | 970×970×800 | 3130×1620×2250 | |
| LRHS-1000B-LV | 1120×1120×800 | 3300×1780×2250 | |
| Impact temperature range | A-4085 B-5585 C-6585 | ||||||
| temperature deviation | ±3 (at no load) | ||||||
| Temperature fluctuation | ≤1 (at no load) | ||||||
| heating rate | From room temperature to 150≤25min (average throughout)(Temperature rise time is the performance of the high temperature chamber when it is operated alone) | ||||||
| cooling rate | From room temperature to -55≤45min (average throughout)(The cooling time is the performance when the cryogenic box operates alone) | ||||||
| Time Setting Range | 160000M | ||||||
| Sample basket size | 250×250×250mm100L 600×600×500mm512L300×400×250mm150L 760×760×500mm753L400×400×400mm234L 920×920×500mm1000L | ||||||
| Temperature recovery time | ≤5min | ||||||
| Transformation time of the carrycot | ≤15s | ||||||
| viewing window | 210 x 275mm or 395 x 395mm (effective field of view) | ||||||
| Outer case material | High quality A3 steel plate electrostatic spraying | ||||||
| Inner box material | Imported high-grade stainless steel SUS304 | ||||||
| Insulation material | Rigid polyurethane foam + fiberglass | ||||||
| Temperature Controller | Imported “UEC” brand temperature meter | ||||||
| temperature sensor | PT100 platinum resistance temperature measurement body | ||||||
| Cooling method | Two-machine cascade refrigeration | ||||||
| Compressor | Tycon (France) / BITZER (Germany) | ||||||
| standard configuration | Basket sample holder 1 set | ||||||
| security protection | Compressor overpressure overload, fan motor overheating, the whole machine under phase / reverse phaseEquipment timing, over-temperature, leakage protection, overload and short-circuit protection | ||||||
| Supply Voltage | AC380V±10% 50Hz | ||||||
| Power | A17kW/22kW/25kW/53kW/72kW/95kWB17kW/22kW/25kW/53kW/72kW/95kWC20kW/25kW/42kW/65kW/85kW/110kW | ||||||
| operating environment | 528 ≤85% RH | ||||||
| Note:1 the above data are in the use of ambient temperature of 25 and well ventilated conditions measured2Can be customized according to the user’s specific test requirements non-standard thermal shock test chamber etc.3This technical information, subject to change without notice | |||||||
| Model | Studio SizeD*W*Hmm | DimensionD*W*Hmm | |
| LRHS-101B-LJS | 450450500 | 11709501530 | |
| LRHS-225B-LJS | 500600750 | 122011001780 | |
| LRHS-504B-LJS | 700800900 | 127013501950 | |
| LRHS-800B-LJS | 80010001000 | 138015002060 | |
| LRHS-1000B-LJS | 100010001000 | 158015102060 | |
| Temperature range | A-20150 B-40150C-60150 D-70150 | ||||||
| Temperature uniformity | 2 unladen | ||||||
| Temperature fluctuation | 0.5unladen | ||||||
| Time Setting Range | 160000M | ||||||
| Humidity range | 20%98% RH | ||||||
| Humidity uniformity | +2% -3% RH | ||||||
| Humidity fluctuation | 2% | ||||||
| Heating rate | 1.03.0/min | ||||||
| Cooling rate | 0.71.0/min | ||||||
| Test hole | Mounted on the left side of the machine for use with external test power or signal cables | ||||||
| Viewing window | 210275mm / 395395mmeffective vision | ||||||
| Outer box material | High quality A3 steel plate electrostatic spraying | ||||||
| Inside box material | Imported high-grade stainless steel SUS304 | ||||||
| Insulation material | Rigid polyurethane foam + glass fiber | ||||||
| Temperature and humidity controller | Adopting Japan UMC brand temperature meter | ||||||
| Temperature and Humidity Sensor | PT100 Platinum resistance thermometer | ||||||
| Cooling method | Single or double cascade refrigeration | ||||||
| Compressor | Tecumseh, France | ||||||
| Standard configuration | 1 roll of wet bulb gauze, 2 sample racks, with condensate catch pan and drain out of the box | ||||||
| Safety | Compressor overpressure overload, over-temperature, fan motor overheating, leakage protection whole machine phase / reverse phase, the whole equipment timing, overload and short circuit protection. | ||||||
| Supply Voltage | AC380V10% 50Hz | ||||||
| Power | (A) 3.5kW/4.0kW/6.0kW/8.0kW/9.0kW(B) 4.0kW/4.5kW/7.5kW/9.0kW/10.5kW(C) 4.5kW/6.5kW/9.0kW/13.0kW/13.0kW | ||||||
| Operating environment | 528 85% RH | ||||||
| Note:1 the above data are in the use of ambient temperature of 25 and well ventilated conditions measured2Can be customized according to the users specific test requirements of the user non-standard high and low temperature alternating humidity test chamber etc.3This technical information, subject to change without notice | |||||||
| Model | Studio Size (D*W*H)mm | DimensionD*W*Hmm | |
| LRHS-101B-L | 450×450×500 | 1160×1000×1610 | |
| LRHS-225B-L | 500×600×750 | 1210×1150×1870 | |
| LRHS-504B-L | 700×800×900 | 1260×1340×2070 | |
| LRHS-800B-L | 800×1000×1000 | 1370×1550×2170 | |
| LRHS-1000B-L | 1000×1000×1000 | 1560×1550×2170 | |
| temperature range | A:-20150 B:-40150C:-60150 D:-70150 | ||||||
| Temperature uniformity | ≤2(at no load) | ||||||
| Temperature fluctuation | ±0.5(at no load) | ||||||
| heating rate | 1.03.0/min | ||||||
| cooling rate | 0.71.0/min | ||||||
| Time Setting Range | 19999H | ||||||
| test hole | Mounted on the left side of the machine for use with external test power or signal cables | ||||||
| viewing window | 210 x 275mm or 395 x 395mm (effective field of view) | ||||||
| Outer case material | High quality A3 steel plate electrostatic spraying | ||||||
| Inner box material | Imported high-grade stainless steel SUS304 | ||||||
| Insulation material | Rigid polyurethane foam + fiberglass | ||||||
| Temperature Controller | Korea Sangwon ST590 Meter | ||||||
| temperature sensor | PT100 platinum resistance temperature measurement body | ||||||
| Cooling method | Single or double cascade refrigeration | ||||||
| Compressor | Taikang, France | ||||||
| standard configuration | Sample racks, 2 tiers, with condensate catch pan and drain out of the box | ||||||
| security protection | Compressor overpressure overload, fan motor overheating, the overall equipment under phase / reverse phaseOver-temperature, overall equipment timing, leakage protection, overload and short-circuit protection | ||||||
| Supply Voltage | AC380V±10 50Hz | ||||||
| Power | A3.5kW/4.0kW/6.0kW/8.0kW/9.0kWB4.0kW/4.5kW/7.5kW/9.0kW/10.5kWC4.5kW/6.5kW/9.0kW/13.0kW/13.0kW | ||||||
| operating environment | 528 ≤85% RH | ||||||
| Note:1the above data are in the use of ambient temperature of 25 and well ventilated conditions measured2Can be customized according to the specific requirements of the user non-standard high and low temperature test chamber etc3This technical information, subject to change without notice | |||||||
| Model | Studio Size (D*W*H)mm | DimensionD*W*Hmm | |
| LRHS-101B-LS | 450450500 | 116010001610 | |
| LRHS-225B-LS | 500600750 | 121011501870 | |
| LRHS-504B-LS | 700800900 | 126013402070 | |
| LRHS-800B-LS | 80010001000 | 137015502170 | |
| LRHS-1000B-LS | 100010001000 | 156015502170 | |
| temperature range | A:-20150 B:-40150C:-60150 D:-70150 | ||||||
| Temperature uniformity | 2(at no load) | ||||||
| Temperature fluctuation | 0.5(at no load) | ||||||
| Time Setting Range | 19999H | ||||||
| Humidity range | 20%98% RH | ||||||
| Humidity uniformity | +2% -3% RH | ||||||
| Humidity fluctuation | 2% | ||||||
| heating rate | 1.03.0/min | ||||||
| cooling rate | 0.71.0/min | ||||||
| test hole | Mounted on the left side of the machine for use with external test power or signal cables | ||||||
| viewing window | 210 x 275mm or 395 x 395mm (effective field of view) | ||||||
| Outer case material | High quality A3 steel plate electrostatic spraying | ||||||
| Inner box material | Imported high-grade stainless steel SUS304 | ||||||
| Insulation material | Rigid polyurethane foam + fiberglass | ||||||
| Temperature Controller | Korea Saintyear TEMI300 | ||||||
| temperature sensor | PT100 platinum resistance temperature measurement body | ||||||
| Cooling method | Single or double cascade refrigeration | ||||||
| Compressor | Taikang, France | ||||||
| standard configuration | 1 roll of wet bulb gauze, 2 sample racks, with condensate catch pan and drain out of the box | ||||||
| security protection | Compressor overpressure overload, fan motor overheating, the overall equipment under phase / reverse phaseOver-temperature, overall equipment timing, leakage protection, overload and short-circuit protection | ||||||
| Supply Voltage | AC380V10 50Hz | ||||||
| Power | A3.5kW/4.0kW/6.0kW/8.0kW/9.0kWB4.0kW/4.5kW/7.5kW/9.0kW/10.5kWC4.5kW/6.5kW/9.0kW/13.0kW/13.0kW | ||||||
| operating environment | 528 85% RH | ||||||
| Note:1the above data are in the use of ambient temperature of 25 and well ventilated conditions measured2Can be customized according to the specific requirements of the user non-standard high and low temperature humidity test chamber etc3This technical information, subject to change without notice | |||||||
| Model | Workshop size(D*W*H) mm | External Dimension(D*W*H)mm | |
| LRHS-101B-LD | 450450500 | 116010001610 | |
| LRHS-225B-LD | 500600750 | 121011501870 | |
| LRHS-504B-LD | 700800900 | 126013402070 | |
| LRHS-800B-LD | 80010001000 | 137015502170 | |
| LRHS-1000B-LD | 100010001000 | 156015502170 | |
| temperature range | A-20RT B-40RT C-60RT D-70RT | ||||||
| Temperature uniformity | 2 (at no load) | ||||||
| Temperature fluctuation | 0.5(at no load) | ||||||
| heating rate | 1.03.0/min | ||||||
| cooling rate | 0.71.0/min | ||||||
| Time Setting Range | 19999H | ||||||
| test hole | Mounted on the left side of the machine for use with external test power or signal cables | ||||||
| viewing window | 210 x 275mm or 395 x 395mm (effective field of view) | ||||||
| Outer case material | High quality A3 steel plate electrostatic spraying | ||||||
| Inner box material | Imported high-grade stainless steel SUS304 | ||||||
| Insulation material | Rigid polyurethane foam + fiberglass | ||||||
| Temperature Controller | Korea Sangwon ST590 Meter | ||||||
| temperature sensor | PT100 platinum resistance temperature measurement body | ||||||
| Cooling method | Single or double cascade refrigeration | ||||||
| Compressor | Tycon Compressors | ||||||
| standard configuration | Sample racks, 2 tiers, with condensate catch pan and drain out of the box | ||||||
| security protection | Compressor overpressure overload, fan motor overheating, equipment phase failure/reverse phaseOver-temperature, overall equipment timing, leakage protection, overload and short-circuit protection | ||||||
| Supply Voltage | AC380V10% 50Hz | ||||||
| Power | A3.5kW/4.0kW/6.0kW/8.0kW/9.0kWB4.0kW/4.5kW/7.5kW/9.0kW/10.5kWC4.5kW/6.5kW/9.0kW/13.0kW/13.0kW | ||||||
| operating environment | 528 85% RH | ||||||
| Note:1 the above data are in the use of ambient temperature of 25 and well ventilated conditions measured2Can be customized according to the specific requirements of the user non-standard Low temperature test chamber etc3This technical information, subject to change without notice | |||||||
| Model | Studio Size (D*W*H)mm | DimensionD*W*Hmm | |
| LRHS-101B-LJ | 450450500 | 116010001610 | |
| LRHS-225B-LJ | 500600750 | 121011501870 | |
| LRHS-504B-LJ | 700800900 | 126013402070 | |
| LRHS-800B-LJ | 80010001000 | 137015502170 | |
| LRHS-1000B-LJ | 100010001000 | 156015502170 | |
| temperature range | A-20150 B-40150C-60150 D-70150 | ||||||
| Temperature uniformity | 2(at no load) | ||||||
| Temperature fluctuation | 0.5(at no load) | ||||||
| Time Setting Range | 160000M | ||||||
| heating rate | 1.03.0/min | ||||||
| cooling rate | 0.71.0/min | ||||||
| test hole | Mounted on the left side of the machine for use with external test power or signal cables | ||||||
| viewing window | 210 x 275mm or 395 x 395mm (effective field of view) | ||||||
| Outer case material | High quality A3 steel plate electrostatic spraying | ||||||
| Inner box material | Imported high-grade stainless steel SUS304 | ||||||
| Insulation material | Rigid polyurethane foam + fiberglass | ||||||
| Temperature Controller | Imported UEC brand temperature meter | ||||||
| temperature sensor | PT100 platinum resistance temperature measurement body | ||||||
| Cooling method | Single or double cascade refrigeration | ||||||
| Compressor | Taikang, France | ||||||
| standard configuration | Sample racks, 2 tiers, with condensate catch pan and drain out of the box | ||||||
| security protection | Compressor overpressure overload, fan motor overheating, the overall equipment under phase / reverse phaseOver-temperature, overall equipment timing, leakage protection, overload and short-circuit protection | ||||||
| Supply Voltage | AC380V10% 50Hz | ||||||
| Power | (A)3.5kW/4.0kW/6.0kW/8.0kW/9.0kW(B)4.0kW/4.5kW/7.5kW/9.0kW/10.5kW(C)4.5kW/6.5kW/9.0kW/13.0kW/13.0kW | ||||||
| operating environment | 528 85% RH | ||||||
| Note:1the above data are in the use of ambient temperature of 25 and well ventilated conditions measured2Can be customized according to the specific requirements of the user non-standard high and low temperature alternating test chamber etc3This technical information, subject to change without notice | |||||||
| Model | Workshop size(D*W*H) mm | External Dimension(D*W*H)mm | |
| LRHS-101-LG | 450450500 | 9407501120 | |
| LRHS-225-LG | 500600750 | 9909001370 | |
| LRHS-504-LG | 700800900 | 119011001620 | |
| LRHS-800-LG | 80010001000 | 129013001720 | |
| LRHS-1000-LG | 100010001000 | 149013001720 | |
| temperature range | RT+10200/RT+10300 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Temperature uniformity | 2%(at no load) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Temperature fluctuation | 0.5(at no load) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| heating rate | 1.03.0/min | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Full temperature rise speed |
View Complete Details
Sand And Dust Test Chamber₹ 3.58 Lakh - ₹ 12.53 Lakh / Piece
Get Latest Price
Environmental Test Chambers₹ 3.58 Lakh - ₹ 12.53 Lakh / Piece
Get Latest Price
Tell Us What are you looking for? Will call you back
Contact Us
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
