My ExportersIndia

For Buyer

For Seller

For Help

Sterilizers

We are leaders in the market for providing best range of Glass Autoclave and Autoclave

Glass Autoclave

We are offering glass autoclave. general introduction: we develop and manufacture our glass autoclave through doing many research and tests and introducing many domestically and overseas advanced technologies. We are a domestic leading manufacturer. The equipment is used for the heat treatment of the laminated glass made by the method of film. We place the pre-connected film of the laminated glass in the autoclave and dissolve the film under certain temperature and pressure. Then we cool the film and attach it to the glass closely to form the laminated glass. Thiskind of material has been widely used in the car, aerospace and construction and decoration industries. We can manufacture 7 series: 1.65m2m 2.25m2.5m 2.65m2.85m 3m and so on. The length of the equipment can be adjusted with regards to the customers needs. This kind of product will be manufactured automatically in the production line and the welding shall be automatic and well carry out the 100%x-ray ndt and the hydrostatic test on the equipment to ensure its safety. The equipment is of high automation in the production process of the glass. Its operation is quite flexible, safe and reliable.

Additional Information:

Payment Terms : L/C, T/T

View Complete Details

Autoclave

We are offering autoclave. Autoclaves made in olymspan have many advantages: 1.we have many patents for the following equipment: 1)autoclave with the hydraulically automatic door operator(zl 2011 2 0025592.4) 2)autoclave with the automatic door operator(zl 2011 2 0025674.9) 3)platform for the kettle tooth cutting.(zl 2011 2 0025738.5) 4)device for vessel to do the pressure maintaining and the water discharge(zl 2011 2 0025595.8) 5)electrical safety interlock for the autoclave(zl 2011 2 0026871.2) 2.used materials: 1)special double scale capacitor plate for hebei handan numbered q345r-gb713; 2)flange made by the model of 16mn; 3)dn100 pipe measuring13325 is made of material numbered 20-gb9948. 3.workmanship: 1)after the door of the autoclave been welded, annealing heat treatment will be carried out; 2)after the cutting teeth of the flange have been polished, the magnetic powder inspection will be carried out; 3)using the double scale capacitor plate to ensure that theres a longitudinal seam in each section; 4)well do some physical and chemical test (e.g. Stretching and punching the material) on materials to ensure their strength. 5)well do the 100% x-ray radiographic inspection on the seams, after that therell be a hydrostatic test measured at 2.1 mpa. The whole procedure will be inspected by the staff of the csei living in our factory, who will sign and seal at after the inspection been passed.

Additional Information:

Payment Terms : L/C, T/T

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us