Qingdao Hna Oilfield Equipment Manufacturing Co. Ltd

Qingdao, Shandong, China

We are offering mud pump. We are a large drilling tools, drilling rig spares, water well drilling and mining pump part, drilling mud pumps and fluid end expendables and mud pump spare parts manufacturer in china. We make w-446 mud pump, f500 mud pump, f800 mud pump, f1000 mud pump, f1300/1600 mud pump. We make all fluid end modules, ceramic liners, hy-chrome liners, rubber replaceable and bonded urethane pistons and all spares for popular brand mud pumps. all our fluid end parts are manufactured to api 7k quality standards. Our api certificate number 7k-0261. parts are available and 100% complete interchangeable for these popular brands:national oilwell; gardner denver; weatherford international /ellis williams, mud king; american manufacturing; baker spd; southwest overseas; emsco;bomco/baoji ; ls national; ideco ; wirth; opi;wilson; gaso; skytop/brewster; drillmec we are a large drilling tools, mud pump and fluid end expendables and mud pump spare parts manufacturer in china. Handling tools: rotary slips, drill collar slips, casing slips, safety clamps, manual tongs, elevator, spiders and so on. mud pump: we make w-446/440 mud pump, f-500 mud pump, f-800 mud pump, f-1000 mud pump, f-1300 mud pump, f-1600mud pump, pz-9 mud pumps.

We are offering mud pump. hw-446 mud pump are 100% replaceable to ews-446 mud pump of american brand. hw-440/446 pump can be widely used in all kinds of works in oil field. When the cylinder liner specification is 6-3 1/2, piston structure is recommended and it is suitable for oil-well repair and shallow-well drilling, etc. When the cylinder liner specification is 3 1/4-2, axial piston structure is recommended and it is suitable for high-pressure work. hw446 mud pump technical specificationrated input power 328kw (440hp)rated stroke 320 stroke/minute(320spm)stroke 152.4mm 6 gear ratio 4.578 :1max. Operation pressure 35mpavalve chamber valve-over api 4# max. Liner dia. 6max. Liner mud pressure(160 stroke/minute)16.9mpadia. Of suction manifold, 6(150#) flange dia. Of discharge manifold 3(900#) flangedia. Pinion shaft 95.25 mm(3.75)key 22.174x15.9mmdimension:(no included base), 2479x1219x1103 mmweight 4463 kgtony.zhaoqingdao hna oilfield equipment.

We are offering mud pumpdesigned and manufactured by hna plant, f-1300 and f-1600 mud pumps can meet the requirements of the same manufacturing technique and quality level as those of f series mud pumps .they feature advanced structural design, reliable use, easy maintenance and compact occupied area. To reduce drilling workers' labour intensity and make the operation easy on site, liners are designed to be fitted into the frame from the frame top. A mini hoist with 500kg lifting capacity is mounted on the frame for disassembling and changing liners. suction inlets of f-1300 and f-1600 mud pumps are fitted with 12"flanges, f-1300 and f-1600 mud pumps are fitted with api#7 valve pots. The suction valve and the discharge valve are interchangeable. Cylinders are made of forged alloy steel and nickel plated to improve their corrosion resistance. Three cylinders of each pump are interchangeable. Valve-over-valve (through type cylinder) design reduces the cyliner volume and promote the volumetric efficiency. notes: cylinders, liners, pistons, valves and seats, valve springs, seal rings, valve covers and cylinder covers at the fluid end of f-1300 and f-1600 mud pumps are all interchangeable.

We are offering mud pump. 1. The fluid end assembly mainly consists of fluid end, valve assembly, liners and pistons. Fluid end is made of forged alloy steel and three fluid ends of each pump are interchangeable. The suction valve and dischargevalve of f mud pump are interchangeable. Liners are hy- chrome liners, the sleeve is made of wear resisting cast iron. Piston and piston rod are of slide fit and sealed with rubber seal rings and are fastened with lock nuts to prevent the piston from loosing. 2.the valve seat bores have bottom shoulders. The piston and liners are spray lubricated and cooled which allow an extended service life. 3. F-1000 mud pumps are rated at longer stroke length and relatively low stroke per minute. It can increase the service life of expendable parts of fluid end assemblythe power end assembly mainly consists of frame, crankshaft, pinion shaft, crosshead and extension rod. F-1000 mud pump specificationsf-800 f-1000max. Liner size/stroke 6-3/4(171.45 mm)9(228.6mm) 6-3/4(171.45 mm)10(254mm)nominal hp/rating 800 hp@150 spm 1000 hp@140 spmtype gear herringbone 4.31:1lubrication pressure and splash to all moving partsvalve pots api 6#approximate weight 26, 603 lbs (12, 067 kgs) 33, 770 lbs (15, 318 kgs)tony.zhaoqingdao hna oilfield equipment

We are offering Mud Pump. F series mud pump is applicable to the requirement of high pump pressure in oilfield and high displacement technology of well drilling with its solid and compact structure, small volume and outstanding operation performance. F series mud pump has long stroke maintaining operation at lower frequency resulting in enhancing the performance of giving water effectively and prolonging the lifetime of the consumable hydrokinetic parts. The air-suction kit is advanced in structure and reliable at operation to reach the optimized absorbing target of air suction into linepipe. F series mud pump powering side adopts the combined lubrication of forced and splashing lubrication featured with reliable lubrication and adding the operation lifetime of powering part. This series pump is widely used in oil field and other lines of industrial and mining enterprises, operation of drilling well and well repairing etc This series pump is produced strictly according to API Spec 7K the Equipment Specification of Well Drilling and Repairing, and performed the EX-Work test under the specification thereof.

we are offering Mud PumpF series mud pump is applicable to the requirement of high pump pressure in oilfield and high displacement technology of well drilling with its solid and compact structure, small volume and outstanding operation performance.F series mud pump has long stroke maintaining operation at lower frequency resulting in enhancing the performance of giving water effectively and prolonging the lifetime of the consumable hydrokinetic parts. The air-suction kit is advanced in structure and reliable at operation to reach the optimized absorbing target of air suction into linepipe.F series mud pump powering side adopts the combined lubrication of forced and splashing lubrication featured with reliable lubrication and adding the operation lifetime of powering part.This series pump is widely used in oil field and other lines of industrial and mining enterprises, operation of drilling well and well repairing etc This series pump is produced strictly according to API Spec 7K the Equipment Specification of Well Drilling and Repairing, and performed the EX-Work test under the specification thereof.

We are offering bomco mud pump. f series mud pump is applicable to the requirement of high pump pressure in oilfield and high displacement technology of well drilling with its solid and compact structure, small volume and outstanding operation performance. f series mud pump has long stroke maintaining operation at lower frequency resulting in enhancing the performance in giving water effectively and prolonging the lifetime of the consumable hydrokinetic parts. The air-suction kit is advanced in structure and reliable at operation to reach the optimized absorbing target of air suction into line pipe. f series pump powering side adopts the combined lubrication of forced and flashing lubrication featured with reliable lubrication and adding the operation lifetime of powering part. the series pump is produced strictly according to api spec 7k "the equipment specification of well drilling and repairing', and performed the ex-work test under the specification thereof. tony.zhaoqingdao hna oilfield equipment.

We are offering gardener denver mud pump. model pz-9 mud pump is a horizontal triplex single acting piston pump which has the advanced structure and small in size. It has the reliable performance, good exchangeability, easy maintenance. the pump consists of two main sections: power end & fluid end. Power end includes pump case pinion shaft, crankshaft, back cover, connection rod, crosshead etc. fluid end includes valve pot assembly, valves, cylinder liners, pistons, discharge manifold and suction manifold, etc. in order to prevent the water-hammer and reduce pressure difference in the outlet side, there fixed a discharge pulsation dampener in the discharged manifold of the pump. in order to prevent the over-pressure, there fixed a shear safty valve in the outlet side of the pump. the gears, bearings, crosshead in the power end adopt splash system and pressure lubrication system. This guarantees a good lubrication. the cylinder liners & the pistons in the fluid end is cleaned and cooled by a centrifugal spray pump with lubrication water. this pump has a complete set of special tools for general maintenance & repair. 2 technical specifications (1) type: horizontal triplex single acting piston pump. (2) rated input power 1000hp(3) rated speed: 130spm(4) stroke length 9(228.6mm)(5) rated speed of pinion shaft 582 rpm(6) gear ratio: 4.48:1(7) valve standard: api7#(8) suction inlet 10(9) discharge outlet 5 1/8(5000psi)(10) overall dimension 205x94x100.5in (5200x2388x2550mm)(11) pump weight 44050 ib(20000kg)tony.zhaoqingdao hna oilfield equipment