SHENZHEN YINUOLINK CO LTD

Shenzhen, China

description:

yn-cpe01 5.8g outdoor bridge, working in the 5ghz frequency band, using 802.11n technology 2x2 two-receiving wireless architecture, support airspeed up to 300mbps, compatible with 802.11an protocol, using ofdm modulation and mino technology, support point-to-point (ptp) and the point-to-multipoint (ptmp) network architecture connects lans that are distributed across different locations and between different buildings. It is a carrier-class outdoor wireless ap that truly realizes high performance, high bandwidth, and multi-functional platform. The 500mw high-power output is matched with an outdoor 5.8g 17dbi fan-shaped 120-degree sector antenna. The wireless signal coverage area is wider and the penetration ability is stronger. With high stability, high transmission rate, and high receiving sensitivity, it can concurrently have 50 people. It is suitable for high-bandwidth, large-area wireless signal coverage. It is suitable for large-scale wifi hotspot coverage in outdoor areas, townships, rural areas, schools, parks, and squares.

features:

1. External dual polarization 17dbi gain 120 degree sector antenna;2. Super anti-jamming and multi-path effect capabilities, air interface speed up to 300mbps;3. Standard 100m ethernet interface;4. Rf radio frequency work in the range of 57255850 ghz, 500mw high power rf output, adjustable power;5. It has advanced anti-interference neighbors' ability to automatically adjust the optimal transmission rate according to signal strength and transmission distance;6. All-round automatic sweep function can automatically scan and select the best channel according to the surrounding wireless environment.7. With bi-directional adaptive modulation capability, it automatically adjusts the radio link quality in turn, optimizing the spectrum utilization to solve the signal attenuation.8. Using 24v 1a poe power supply circuit, 802.3at protocol.

description:

yn-q300n-b1 is the wifi router module based on qca9531 chip design, with high-performance and small size design. This item supports large capacity ddr2 and high speed spi flash, can connected to the motherboard by "pin". The user can make multiplex structural design according to the mold id and board type. It complies with ieee 802.11n, ieee 802.11g and ieee 802.11b standards, adopts 2x2 mimo structure. This unit can also supports wifi signal multiplexing transceiver and its wireless signal rates can be up to 300mbps. It provides 1 usb2.0 port, 2 10/100m phy and several gpio ports. It reserves the uart communication interface suiting for further development.

yn-q300n-b1 adopts 2x2 mimo (multiple input multiple output) architecture, wireless signal multiplexing, transmission rate up to 300mbps; provides two 10 / 100m phy interface, a usb2.0 and gpio interface, extended powerful, widely used in wireless mobile hard disk, wireless high-definition receiving box, network camera, air conditioning or tv embedded wireless applications and other products. Customers can either select an onboard antenna or an external antenna. The module provides a complete network interface. You can achieve wifi ap, wifi sta, wifi repeater and other functions.

description:

yn-ies100501 is a 5port mini unmanaged ethernet switch module, providing 5*10 / 100m adaptive ethernet port, providing dc input reverse polarity protection to prevent burnout products; mini design, easy to install, the power portsupports static and surge protection

features:

1) conforms to ieee 802.3, ieee 802.3u, ieee 802.3ab standard.

2) full-duplex ieee 802.3x standard, half-duplex using backpressure standard.

3) 5*10 / 100m adaptive network ports, support port auto flipping (auto mdi / mdix).

4) each port supports auto-negotiation function, automatically adjust the transmissionmode and transmission rate.

5) support mac address self-learning.

6) dynamic led indicator, to provide a simple working status tips and troubleshooting.

7) lightning surge protection, electrostatic support contact 8kv, surge differential mode2kv, common mode 4kv.

8) redundant dual dc power supply input overload protection.

9) power supply supports dc7.5-12v.(poewr support positive and negative access)

Features:

1. External dual polarization 17DBi gain 120 degree sector antenna;2. Super anti-jamming and multi-path effect capabilities, air interface speed up to 300Mbps;3. Standard 100M Ethernet interface;4. RF radio frequency work in the range of 57255850 GHz, 500MW high power RF output, adjustable power;5. It has advanced anti-interference neighbors' ability to automatically adjust the optimal transmission rate according to signal strength and transmission distance;6. All-round automatic sweep function can automatically scan and select the best channel according to the surrounding wireless environment.7. With bi-directional adaptive modulation capability, it automatically adjusts the radio link quality in turn, optimizing the spectrum utilization to solve the signal attenuation.8. Using 24V 1A POE power supply circuit, 802.3at protocol.