Xinxiang Huayin Renewable Energy Equipment co. ltd

Xinxiang, China

We are offering waste plastic refining oil machine.Main feature of wasteplasticpyrolysis to oil plant 1). Heating systemreactor: using q245r boiler plate and the thickness is 12mm, 14mm, 16mm , the thickness would be changed according the customers'requirments.The main engine use horizontal-type of 360structure-0.8 rmin2). Separation systemgas separator & depositing tank: depart the heavy oil and impurities from the oil gas to purify the oil.3). Condensing systemgenerally speaking , for all the raw material all be finished by heating to gasification and cracking, and then cooling to get oil, so they key is the relationship between the yield rate and condensation. So the best and easy way is to increase the condense area so as to get higher yield rate.4). Dedusting systemdesulfurization dedusting, water film cyclone, desulfurization dedusting:remove the sulphur(when use coal as fuel) and dustwater purification: for the second removal.5). Waste gas recycles systemwater seal & spray fire gun: in the process of refining oil, when the gas is heated up to 150 , it will produce a large amount of gas ch4&c4h8 , which cannot convert to liquid at normal temperature and normal pressure. However, these gases can be used as fuel, which is not only environment protection but also energy conservation6). Carbon black recycles systemheaving dragon screw conveyer: the solid residual will be left after the catalyst splitting from scrap plastic, approximately take up 5% to 10% of the waste tire.Its main component is the black carbon, which can be used as raw materials in industry, as well could be mixed with the pulverized coal ash to produce the raw material of the thermal power plant, and also could be applied to the manufacturingof the pulverized coal ash brick (one kind of environmental protection building material).

We offer huayin new design waste plastic pyrolysis to oil machine with high oil. Product name: waste pyrolysis machine input material: waste tyre, waste plastic, scrap rubber output products: 45%-50% fuel oil, 30% carbon black, 15% steel wire, combustible gas material of reactor: q345r boiler platess310310s+q345r capacity 3-50 tons per day equipment service life:5 to 7 years reactor thickness:16mm18mm cooling system:"four in one" condensing systemmachine type: batch type and continuous type land request: 300-400 square meters fuel material: coalwoodfuel oilnatural gas (any one of them) manpower: four workers enviromental friendly feature water includes two parts:first, condensing water, it can be recycled, water release is that pour into, no pollution, only a little high temperature. Second, dust removing water, it must be polluted water, but it also can be recycling, just pour into no discharge. .Gas includes two parts:first, exhaust, our equipments have advanced exhaust gas recovery system; we can recycling and reuse it. Second, smoke dust, it is generated from burning coal or exhaust, after the treatment of dust removing device, can meet the emission standards of national requirements. safety operationfeature 1). Professional sealing technology for cover, oil outlet.2). Heavy oil is separated which can avoid the problems of jam in later condensing.3). Vacuum system will prevent exhaust gas from going back to reactor and causing accident.4). Alarm, safety valves, thermometer, pressure gauge and safety valve.5). It is dangerous to burning exhaust gas (c1 to c4). In our process, it is transferred first through the safety device and a safety burning air muzzle. Before burning, we should ensure the safety of production.