Zhejiang Linuo Flow Control Technology Co., Ltd

Rui an, China

We are offering slurry knife gate valve. Knife gate valve are linear shut off valves that are light weight with compact construction. Valves are available as manual with hand-wheel, or can be automated with pneumatic cylinder actuator for remote operation. The arc shape of the gate of our knife gate valve is designed to be particularly suitable for cutting off fluid containing fiber or suspended particles, so the knife gate valves are ideal for many applications in the process industries of pulp & paper, waste water treatment, mining, sugar making and chemical processing.

We are offering square knife gate valve. Square knife gate valve is mainly used as a pneumatic shut off valve for process control in pulp making slurry or sewage treatment. It is particularly suitable to serve as a residue discharger on equipment such as stock cleaners, gravity separators and hydrapulper in the paper making industry. Soft seated valves are bi-directional to 10 bar in the preferred direction with limited tightness at low pressure in non-preferred.

We are offering knife gate valve. Through-going knife gate valve is mainly intended for process control in pulp slurry, residue discharge and sewage treatment. It is especially suitable for installation with equipment such as stock cleaners, gravity separators, aquapulper. Valve is full port in the open position with low flow resistance. Two-piece body construction with no cavities eliminates product build-up. O-ring loaded removable seat is self-compensating with good abrasion resistance and long service life.

We are offering funnel knife gate valve. Funnel knife gate valve is used in service as a pneumatic residue discharge valve in pulp making, paper making and sewage treatment. This type of valve is well suited for high consistency media containing solids, fiber or residue, serving as a residue discharge valve on stock cleaners, gravity separators or pressurized screens. The funnel at the bottom of the valve collects waste discharged from the valve body during the closing stroke. This greatly reduces the wear between the body and gate, and prolongs the life cycle of the valve.

We are offering double knife gate valve is typically used for shut off service in pulp making, slurry, residue discharge and sewage treatment. It is particularly suitable for residue discharge service on stock cleaners, gravity separators, hydrapulper, etc. In the paper making industry. O-ring loaded removable seat is self-compensating with good abrasion resistance and long service life. Avaiable with metal seat, ptfe seat or epdm seat selection is based on application.

We are offering slurry knife gate valve. Slurry knife gate valves are soft sealing linear shut off valves that are light weight with compact construction and convenient to install and use. Valves are full port in design to realize the characteristic of small flow resistance. When the gate is open, it will achieve direct current between valve and pipeline. Valves are available as manual with hand-wheel, or can be automated with actuator for remote operation. The cone-shape design of the gate provides strong cutting force. The die-casting rubber seat which can realize bi-directional sealing. The biggest characteristic of valves is that when they are fully open, the medium will not come into the valve chest, which can prevent the valve chest from setting pulp during the valve running online, then reducing maintenance cost.