Separators & Strainers

We are leaders in the market for providing best range of Centrifugal Ore Separator and Hydrocyclone

Centrifugal Ore Separator

centrifugal separator is mainly composed of two parts: separation part and auxiliary part. 1. separation part. the rotary drum is the separation part. the drum is a hollow frustum with a gradient of 3 to 5 . it is fixed on the axis via the chassis, thus, to rotate around the axis. 2. auxiliary part. this part includes several main units: feeding device, discharging device, washing device, operation control device and so on. separation process and principle of centrifugal separator are like the following: rotary drum is rotate at a high speed, when the ore slurry is fed into the drum, it will also rotate speedily. under the effect of the centrifugal force, on one hand, the heavy mineral will be deposited on the inner wall of the rotary drum and rotate with the drum; on the other hand, the light mineral will rotate at a differential drive and along the inclined direction to flow to the discharging part-thus form the tailings. after three-minute separation, the and separation part of the feeding device will automatically depart from its normal position and stop feeding ore slurry to the drum. the separation part of the discharging device will also automatically depart from its normal position after the tailings have been discharged-in order to intercept the headings. then, the high pressure washing valve will automatically open to wash away the deposited headings on the inner wall of the rotary drum. when the headings have been completely discharged, the separation parts of the feeding device and the discharging device will automatically reset and start the next separation circulation. more information you may email to jintai666(at)gmail(dot)com or go to http://www(dot)zzjtgs(dot)com .zhengzhou jintai mineral processing equipments co., ltd is a professional&strong manufacturer, providing all kinds of beneficiation equipments with favorable prices and high quality.we are manufacturer so that we can also design the product according to your requirements.we expect your inquiries.our fax number is 0086-371-68723618. our phone number is 0086-371-68713618 or 0086-13383821961.

View Complete Details

Ask Latest Price & Details

Hydrocyclone

the hydroclone uses cyclonic separation which is a method of removing particulates from a water stream, without the use of filters, through vortex separation. rotational effects and gravity are used to separate mixtures of solids and fluids. a high speed rotating water flow is established within a cylindrical or conical container called a cyclone. air flows in a spiral pattern, beginning at the top (wide end) of the cyclone and ending at the bottom (narrow) end before exiting the cyclone in a straight stream through the center of the cyclone and out the top. larger (denser) particles in the rotating stream have too much inertia to follow the tight curve of the stream and strike the outside wall, falling then to the bottom of the cyclone where they can be removed. in a conical system, as the rotating flow moves towards the narrow end of the cyclone the rotational radius of the stream is reduced, separating smaller and smaller particles. the cyclone geometry, together with flow rate, defines the cut point of the cyclone. this is the size of particle that will be removed from the stream with a 50% efficiency. particles larger than the cut point will be removed with a greater efficiency, and smaller particles with a lower efficiency.model allowed oil pressure relief?mpa? processing capacity(t/d) overfall granularity(mm) weight(kg?100 0.05-0.3 25-40 0.025-0.25 31.3125 0.05-0.3 40-60 0.025-0.25 87150 0.05-0.3 80-120 0.025-0.25 105200 0.05-0.3 150-250 0.025-0.25 125250 0.05-0.3 250-350 0.025-0.25 151300 0.05-0.3 350-450 0.025-0.25 280500 0.05-0.3 450-600 0.025-0.25 718 more information you may email to jintai666(at)gmail(dot)com or go to http://www(dot)zzjtgs(dot)com .zhengzhou jintai mineral processing equipments co., ltd is a professional&strong manufacturer, providing all kinds of beneficiation equipments with favorable prices and high quality.we are manufacturer so that we can also design the product according to your requirements.we expect your inquiries.our fax number is 0086-371-68723618. our phone number is 0086-371-68713618 or 0086-13383821961.

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back