Write a Review
Our Products
Our product range contains a wide range of PP Chips, Nylon 6 Chips, fiber flax fiber, Brown Flax Fiber and raw bamboo fiber
Polyethylene Terephthalate Chips are the basic materials of plastics or polymers. contingent on handling – in raw material Pet chips, PET exists as both shapeless (transparent) commonly known as Bright or Super Bright Chips and as a semi-crystalline material generally known as PET Semi-Dull Chips. PET Chips are used to create PET Film. PET (polyethylene terephthalate) chips are created by granulating polyester obtained in a polycondensation reaction of pure Terephthalic acid and Monoethylene glycol. They are used to make yarns and fibers in various lustres such as semi-dull, full-dull, and bright lustre. Cotton farmers in developing countries, including India, often lose out due to an ineffective supply chain strategy. Approximately 100 million households participate in cotton production, with around 300 million workers supporting the sector through services like transportation, ginning, baling, and storage. Farmers confront numerous challenges, from climate change to low seed cotton prices, which hinder their ability to earn a stable income. They also compete against heavily subsidized producers in developed countries and face unfavorable trade policies.
PTT fiber is a futuristic substitute for polymer fabric and has an increasing demand across the globe. Due to it’s natural and comfortable feel, great tension, and elasticity, it can be dyed at a low temperature. They are highly washable as well. They can be used for blended yarns with natural fibers such as wool. It combines various characteristics such as softness and performance of the nylon elasticity, as well as the fluffiness of acrylic fiber. Unlike polyester, it is eco-friendly and sustainable.
Additional Information:
Packaging Details : NEED PRODUCT DETAILS FOR QUOTING PRICE
| ITEMS | UNIT | QUANTITY |
| Molecular weight | g/mol | 62.08 |
| Boiling point | °C | 197 |
| Freezing point | °C | -13 |
| Viscosity | at 20°C (cp) | 20 |
| Specific heat | at 0°C (cal/gm/°C) | 0.543 |
Nylon 6 chips are obtained by hydrolytic polymerization of Caprolactam in the presence of Dicarboxylic acids as a chain regulator. This results in subsequent processing of the polymer melting into a chip form. Later, low molecular weight portions are extracted from the chip with water and subsequent drying.
| PRODUCT | DTEX | LUSTRE |
| Nylon 6 | 1.7 – 2.2 | semi-dull & bright |
| Nylon 6 | 2.0 – 4.0 | semi-dull & bright |
| PRODUCT | DTEX | LUSTRE |
| Nylon 6.6 | 1 | antibacterial |
| Nylon 6.6 | 1.0 – 1.3 | semi-dull |
| Nylon 6.6 | 1.0 – 4.0 | semi-dull & bright |
| Nylon 6.6 | 2 | hollow |
| Nylon 6.6 | 2.0-4.0 | semi-dull & bright |
| Nylon 6.6 | 3.3 | bright & semi-dull, round cross section |
| COUNT | AVERAGE STAPLE LENGTH | IMPURITY % | LINEAR DENSITY |
| 40s | 25 mm – 40 mm | 2 – 8 % | 0.9 – 1.8 |
| Testing condition: Temperature: 20 ℃ Relative humidity: 65%±3%) | 1.2DX38MM | 1.4DX38MM | 2DX51MM | 3DX86MM | 3DX89MM | 3DX102MM |
| Dry tensile strength (CN/dtex) | 2.3 | 2.3 | 2.11 | 2.4 | 2.36 | 2.29 |
| Dry elongation at break (%) | 21.2 | 21.2 | 27.7 | 21.2 | 19 | 18.1 |
| Wet tensile strength (CN/dtex) | 1.3 | 1.31 | 1.25 | 1.36 | 1.19 | 1.35 |
| Linear density percentage of deviation (%) | (+5.26) | 0.6 | 6 | -2.4 | -1.8 | -1.5 |
| Percentage of length deviation (%) | -1.6 | -1.6 | 1.4 | -2.3 | -3.6 | -0.3 |
| Over-length staple fiber (%) | 0.3 | 0.4 | 1 | 0 | 0 | 0 |
| Over-cut fiber (mg/100g) | 3.4 | 3.2 | 10.1 | 3.5 | 0 | 1.1 |
| Oil content (%) | 0.28 | 0.2 | 0.26 | 0.28 | 0.3 | 0.3 |
| Residual sulfur (mg/100g) | 8.7 | 9.9 | 18.4 | 9.5 | 11.8 | 10.5 |
| Whiteness (%) | 72.1 | 72.1 | 59.9 | 66.3 | 61.8 | 66.5 |
| Coefficient of dry tenacity variation an S (CV) (%) | 21.21 | 12.21 | 8.66 | 12.11 | 10 | 12.6 |
| Defect (mg/100g) | 9.9 | 3.4 | 3.7 | 3.6 | 0.6 | 2.7 |
| Oil-stained fiber (mg/100g) | 0 | 0 | 0 | 0 | 0 | 0 |
| Moisture regain (%) | 11.42 | 11.42 | 12.96 | 11.4 | 10.37 | 10.29 |
| Rate | A | A | A | A | A | A |
| DENIER | CUT LENGTH | LUSTRE | TYPE |
| 0.9 | 44,51 | Bright | Regular |
| 1.2 | 38,44,51 | Bright/Semi Dull | Regular |
| 1.5 | 38,44,51 | Bright/Semi | Regular |
| 2 | 44,51,64 | Bright/Semi | Regular/Shrinkable |
| 3 | 344,51, 64,100,102VC ,105VC,125VC, 136VC | Bright/Semi | Regular/Shrinkable |
| 5 | 64,100, 120,150,102VC, 105VC,125VC ,136VC | Bright/Semi | Regular/Shrinkable |
| 7 | 100,120, 150,102VC, 105VC,125VC, 136VC | Bright/Semi | Regular/Shrinkable |
| 8 | 100,120, 150,102VC, 105VC,125VC, 136VC | Bright/Semi | Regular/Shrinkable |
| 10 | 100,120, 150,102VC, 105VC,125VC, 136VC | Bright/Semi | Regular/Shrinkable |
| 11 | 100,120, 150,102VC, 105VC,125VC, 136VC | Bright/Semi | Regular/Shrinkable |
| 15 | 100,120, 150,102VC, 105VC,125VC ,136VC | Bright/Semi | Regular/Shrinkable |
VC : VARIABLE CUT LENGTH, 102VC ( 70-125mm ), 105VC (85-125mm), 125VC (100-150mm), 136VC (125-150mm)
RAW WHITE, ACRYLIC TOW WORSTED SPINNING
1.51.7122Bright / Semi DullRegular22.2123, 132Bright / Semi DullRegular33.3146Bright / Semi DullRegular55.6125Bright / Semi DullRegular
| DENIER | DTEX | KTEX | LUSTRE | TYPE |
| 1.2 | 1.4 | 114 | Bright | Bright |
ACRYLIC STAPLE FIBER RAW WHITE1.51.7122Bright / Semi DullRegular22.2123, 132Bright / Semi DullRegular
| DENIER | DTEX | KTEX | LUSTRE | TYPE |
| 1.2 | 1.4 | 114 | Bright | Bright |
WORSTED, SEMI WORSTED & WOOLLEN SPINNING7, 10, 157, 8, 11, 1776, 102, 105Bright / Semi DullRegular Shrinkable 23%55.676, 89, 102, V64, V74, V89Bright / Semi DullRegular Shrinkable 23 to 27%
| DENIER | DTEX | KTEX | LUSTRE | TYPE |
| 3 | 3.3 | 76, 89, 102, V64, V74, V89 | Bright / Semi Dull | Regular Shrinkable 23-29% |
| DENIER | CUT LENGTH | LUSTER |
| 1.2 | 32, 38, 55 | BRIGHT, RW, Color |
| 1.4 | 32, 38, 55 | BRIGHT, RW, Color |
| 1.5 | 32, 38, 55 | BRIGHT, RW, Color |
Arvind Gupta (Colossustex Pvt. Ltd.)
D1303 Lake Lucerne Phase 3, Powai, Mumbai, Maharashtra - 400076, India
Share us via
