Cranoist Material Handling Equipments Pvt Ltd Ahmedabad, Gujarat

CRANOIST wire rope hoist are designed in modular construction, which greatly simplifies repairs & cuts downtime. The special features are low headroom spur / helical gears running on antifriction ball bearings with oil bath lubrication, motors conforming to IS 325, “fail to safe” brakes which automatically operate in case of any power failure, tested wire rope conforming to IS 2266, longed hooks confirming to IS 3815 and push button stations operating at step down voltage of 110v, 24v. CRANOIST Hoists are designed in accordance with IS 3938 1979. CRANOIST Hoist are compact, rugged and elegant in appearance to accommodate specific requirements. CRANOIST Hoist can also be built with micro speed, flexible trolleys to negotiate small radius, high speed and high lifts. Hoists suitable for steel mail duty, foundries & chemical plants. Capacity : 500kgs. To 20000kgs.   Motor   Motors are totally in dust proof construction face / foot mounted TESE / TEFC squirrel cage Induction motor. B3 construction, 415 V + / - 10% 50 Hz + / - 5%, F class – Insulation, Ambient 50 cent, S4 duty 40% CDF, 150 starts / stop per hour, crane duty motor, Protection Class – IP 55, confirming to IS 325 make – Kirloskar, BBL, Crompton & Siemens.   Brakes   Electro magnetic AC disk type / shoe type, electro hydraulic thruster type brakes are designed and built to arrest and hold safety the full load capacity of the hoists, are provided in all motions. These are automatically released when the motor circuit off. This feature works as a positive safety device as the brakes automatically comes in to operation when the power supply fail.   Gear Box   Gear Box are used in hoist are totally enclosed dust proof construction. The gears and pinions are running in oil bath and hence to external lubrication are required. Pinions are of En. 24 & Gears are of En. 9 forged / rolled steel. Use of totally enclosed gear boxes are desirable in view of the increase transmission efficiency and longer life.   Limit Switches   Limit switched are provided to prevent the over lowering and over hoisting.   Button Block   The hooks is single shank ‘C’ type of forged steel tested as per IS 3815 once to rate table and swivel supported on thrust bearing.   Control Panel   The protective control panel consists of contractors, mcb, relay, transformers etc. The hoist is operated by pendent push button station suspended from the hoist with a wire rope. Hoist are suitable for three phases 415v + - 10%, 50 Hz, AC supply.   Rope Drum   The rope drum is fabricated from seamless pipe / plate having eighter single or double grooved configurations. The rope guide provided for safety of wire rope to prevent our lapping of the rope on the drum.     Optional Features   Variable speed control / micro speed arrangement through frequency inverts / variable frequency drives. Radio remote control. Suitable for curvature.

CRANOIST Cage Hoist have been specially designed for lifting the material safely. Goods cage are provided with collapsible gate & goods cage are guided by supporting guide structure/members. Cranoist hoist are used for hoisting & lowering the goods cage. interlocking system & limit switches are provided for lifting the material safely.   GOODS LIFTS   Rope Hoist, mounted on a supported I-Beam, which lowers & raises the cage. ln the absence of a RCC well inside the building, a fabricated enclosure supporting structure can be erected on site. This structure is independent of the building can be erected inside or outside the building, just touching. Guide wheels are fitted on the cage which run in the C-Guides which are provided on the structure on opposite sides. This arrangement enables smooth & trouble free travel of the cage in a vertically straight line. Collapsible gates are provided at all entry! exit points for essential safety.     DESIGN   Compact dimensions, low weight, easy to operate and easy to maintain, modular design with direct fits between components.     MOTORS   Electric motors of all the motions will be totally enclosed, fan cooled Slipping / Sq. Cage induction crane duty motors with class-B insulation and protected with IP-55 protection confirming to IS-325. All the motors will be S4 duty with 40% C.D.F 4 Poles and 6 Poles, 3 Phase, 415V : 50Hz for A.C. Supply.   GEAR BOXES   The entire Gear Boxes are made of accurate hob cut helical / spur gears & pinions Having hardness 250 to 300 BHN mode from carbon alloy steel. The all gears & pinions running On anti-friction type ball / roller hearings in totally enclosed oil bath giving constant splash Lubrication. The helical / spur gear designed for adequate strength and optimum wear resistance for smooth operation long life.     ELECTRICAL PANEL   Modular design, covering a very wide operating range. The systems are designed for ease of installation and maintenance and reliable operation, with fuseless circuitry, ducted wiring and non-screwed terminals. Each drive group is equipped with a motor overload protection device to provide effective protection against inadmissible overloading.     SPECIAL FEATURES   LIMIT SWITCHES To prevent over hoisting & over lowering of hook. ELECTRO-MECHANIC DOOR LOCKS near the collapsible gates to ensure. * Lift does not work electrically if any door is open. * The collapsible gate does not open mechanically unless cage is on corresponding level. SPRING BUFFERS on the floor of the lift well to cushion the cage.  

CRANOIST electric overhead traveling cranes are designed & manufactured accordance with IS 807, ARE 3177, code of practice for design, manufacturing, erection, testing of structural part of the crane and IS 3177 code of practice for design of overhead traveling crane. In the design of components adequate factors of safety as per relevant code is allowed impact, fatigue, worn and stress concentration factors are taken whenever applicable. All drives are designed to give sound & efficient performance.

Cranoist goliath gantry cranes are designed & manufactured accordance with is 807, is 3177, code of practice for design, manufacturing, erection, testing of structural part of the crane and is 3177 code of practice for design of overhead traveling crane. In the design of components adequate factors of safety as per relevant code is allowed impact, fatigue, wear and stress concentration factors are taken whenever applicable. All drives are designed to give sound & efficient performance.

Cranoist goliath gantry cranes are designed & manufactured accordance with is 807, is 3177, code of practice for design, manufacturing, erection, testing of structural part of the crane and is 3177 code of practice for design of overhead traveling crane. In the design of components adequate factors of safety as per relevant code is allowed impact, fatigue, wear and stress concentration factors are taken whenever applicable. All drives are designed to give sound & efficient performance.

Cranoist cage hoist has been specially designed for lifting the material safely. Goods cage are provided with collapsible gate & goods cage are guided by supporting guide structuremembers. Cranoist hoist are used for hoisting & lowering the goods cage. Interlocking system & limit switches are provided for lifting the material safely.